Q1. - (Topic 3)
You have a network printer connected to print server. You need to be able to print if print server goes down.
What should you configure?
A. branch office direct printing
B. printer pooling
C. spooling
D. Print forwarding
Answer: A
Explanation:
Branch Office Direct Printing can reduce Wide Area Network (WAN) usage by printing directly to a print device instead of a server print queue. This feature can be enabled or disabled on a per printer basis and is transparent to the user. It is enabled by an administrator using the Print Management Console or Windows PowerShell on the server.
The printer information is cached in the branch office, so that if the print server is unavailable for some reason (for example if the WAN link to the data center is down), then it is still possible for the user to print. Branch Office Direct Printing requires the following operating systems: Windows Server 2012 Windows 8
Q2. - (Topic 3)
A company’s server virtualization team needs to provision a series of Hyper-V workloads to use existing network storage arrays. The team has chosen to use Fibre Channel ports within the guest operating systems.
Which of the following Windows Server versions can be used as guest operating systems when using Hyper-V Fibre Channel ports?
A. 2003 R2
B. 2008
C. 2003
D. 2012
Answer: B,D
Explanation:
Windows Server 2008, 2008 R2, and 2012 R2 can be guest operating systems when using
Hyper-V Fibre Channel host bus adaptors (HBAs). Updated HBA drivers are needed along
with NPIV-enabled (N_Port ID Virtualization) SANs.
Quick Tip: Virtual Fibre Channel logical units cannot be used as boot media.
Q3. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation:
The Automatic Stop Action setting should be modified because it will allow you to configure: “Save the virtual machine state” option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down. OR “Turn Off the virtual machine” is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine. OR “Shut down the guest operating system” is successful only if the “Hyper-V Shutdown” guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
Q4. HOTSPOT - (Topic 3)
You have a DNS server named Server1. Server1 runs Windows Server 2012 R2. The network ID is 10.1.1.0/24. An administrator creates several reverse lookup zones. You need to identify which reverse lookup zone is configured correctly. Which zone should you identify? To answer, select the appropriate zone in the answer area.
Answer:
Q5. DRAG DROP - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to create a new volume on Server1.
The new volume must have the following configurations: Be stored on a new virtual hard disk Be assigned the drive letter G Have the NTFS file system In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
Answer:
Q6. - (Topic 1)
You have a print server named Server1 that runs Windows Server 2012 R2.
You discover that when there are many pending print jobs, the system drive occasionally
runs out of free space.
You add a new hard disk to Server1.You create a new NTFS volume.
You need to prevent the print jobs from consuming disk space on the system volume.
What should you modify?
A. The properties on the new volume
B. The properties of the Print Spooler service
C. The Print Server Properties
D. The properties of each shared printer
Answer: C
Explanation:
Windows spools print jobs by default to the following directory as they are processed:
%SystemRoot%\SYSTEM32\SPOOL\PRINTERS.
It is possible for the administrator of a Windows print server to manually instruct Windows
the location for placing the spool files, if for example there is a concern for disk space.
Q7. - (Topic 3)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.
Your company uses smart cards for authentication.
You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.
What should you configure?
A. The RemoteFX settings
B. The Enhanced Session Mode Policy
C. The NUMA Spanning settings
D. The Integration Services settings
Answer: B
Q8. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2008 R2 installed.
Most of the Contoso.com servers have 64 – bit CPU’s installed, while the rest have 32 – bit CPU’s installed. You are informed that Contoso.com wants to deploy Windows Server 2012 R2 on all their servers.
You need to make recommendations to ensure that this is possible.
Which of the following would you recommend?
A. You should inform Contoso.com that the deployment can proceed without any changes.
B. You should inform Contoso.com that the servers with 32 bit CPU’s must be upgraded to include 64 bit CPU’s for the deployment to proceed.
C. You should inform Contoso.com that the servers with 64 bit CPU’s must be upgraded to include 32 bit CPU’s for the deployment to proceed.
D. You should inform Contoso.com that the deployment is not in any way possible.
Answer: B
Explanation:
Windows Server 2012 is a 64-bit only operating system. Minimum: 1.4 GHz 64-bit processor
Q9. DRAG DROP - (Topic 1)
You have a server named Server1.Server1 runs Windows Server 2012 R2.
Server1 has two network adapters. Each network adapter must be configured as shown in the following table.
You need to configure the correct IPv6 address prefix for each network adapter.
Which prefix should you select for each network adapter?
To answer, drag the appropriate IPv6 prefix to the correct network adapter in the answer
area.
Each prefix may be used once, more than once, or not at all. You may need to drag the
split bar between panes or scroll to view content.
Answer:
Q10. - (Topic 3)
A company’s server administration team would like to take advantage of the newest file systems available with Windows Server 2012 R2. The team needs a file system capable of managing extremely large data drives that can auto-detect data corruption and automatically perform needed repairs without taking a volume offline.
Which file system should the server administration team choose?
A. NFS
B. DFS
C. NTFS
D. ReFS
Answer: D
Explanation:
The ReFS (Resilient File System) is capable of managing extremely large data drives (1
YB Yottabyte), can auto-detect data corruption, and automatically perform needed repairs
without taking the volume offline.
Quick Tip: The command fsutil fsinfo volumeinfo x: will display the volume file system.
ReFS is only intended for data drives and not compatible with all Windows Server 2012 R2
file system technologies, however it is compatible with the new Storage Spaces.