Q1. - (Topic 4)
What additional NIM functionality is gained by installing the optional dsm.core fileset?
A. NIM can query the WWPN of an uninstalled LPAR.
B. NIM can initiate DLPAR operations against an installed LPAR.
C. NIM can initiate an automated bos_inst install operation of an LPAR.
D. NIM can automate a TSM backup before applying APARs or patches
Answer: C
Q2. - (Topic 1)
Which of the following is an AIX 7 Cluster Aware feature?
A. Cluster application load balancing
B. Cluster shared volume groups on the shared disk C. Cluster IP addresses on the shared resource
D. Cluster configurations on the cluster repository disk
Answer: D
Q3. - (Topic 4)
A customer has a virtualized system using Virtual I/O Server with multiple client partitions accessing the SAN using NPIV?
Which command on the client partition should be run to retrieve the network address of the fiber adapter?
A. lscfg -vp –l fcs0
B. lspci –va fcsi | grep “Network Address”
C. lspath –npiv fcs0 | grep “NetworkAddress”
D. lsdev | grep fcs0
Answer: C
Q4. - (Topic 4)
A VIO client will use NPIV to boot from the SAN and needs to be installed using NIM.
Which two methods canbe used to gather the WWPN information? (Choose two.)
A. Examine the NIM client properties.
B. Boot the LPAR and runlscfg –vl fcsX
C. Utilize the HMC command line tool, lssyscfg
D. Log into the VIO servers and runlscfg –vl fcsX
E. Check the LPAR properties from the HMC GUI
Answer: A,E
244. - (Topic 4)
An administrator wants to change an LDAP user to use local files to authenticate.
What should the administrator change?
A. Registry attribute
B. Kerberosserver
C. SYSTEM attribute
D. LDAP server
Q5. - (Topic 3)
Which command displays path and state information for a Multipath I/O (MPIO) capable device?
A. Ispath
B. Isvpcfg
C. Isdev
D. Ispv
Answer: A
Q6. - (Topic 4)
What is the most likely cause of the following error when configuring a system?
A. The auto-negotiation setting is disabled.
B. The HBA port at fcs1 is not cabled.
C. The RECOVERY policy on fscsi1 has been set to disabled.
D. The SDD multipath software has not been installed.
Answer: A
Q7. - (Topic 2)
Which command is used to change the reserve policy of a disk?
A. chdev
B. chpv
C. chvg
D. chattr
Answer: A
66. - (Topic 2)
An administrator wants to reorganize some of the logical volumes in the datavg volume group.What TWO things must the administrator verify before starting the reorganization? (Select 2)
A. Enough free physical partitions exist to accommodate the largest logical volume being reorganized.
B. At least one free physical partition exists.
C. That noneof the logical volumes contain a paging space.
D. The logical volumes being reorganized are relocatable.
E. Quorum has been disabled for the volume group.
F. The volume group descriptor area (VGDA) has room to expand.
G. That any raw logical volumes beingre-organized are closed.
Q8. - (Topic 2)
In the following output, what do the ec and pc columns mean?
A. Program counter and entitled CPUs
B. Physical processors consumed and entitled capacity consumed
C. Processor count and extra cores
D. Pages compressed and elapsed context switches
E. Pool compression and external compression
Answer: B
Q9. - (Topic 4)
An administrator needs to replace a failing hard disk, hdisk0, in a mirrored rootvg. After removing the mirror from hdisk0, the administrator cannot remove hdisk0 from the rootvg due to one logical volume still remaining on the failing hard disk, as described below.
How can this issue be resolved?
A. migratepv hdisk0 hdisk1
B. migrateiv lg_dumplv hdisk1
C. mkivcopy lg_dumplv hdisk1
D. mirrorvg -l lg_dumplv hdisk0 hdisk1
Answer: A
Q10. - (Topic 4)
In addition to enabling remote command execution, which task highlighted in the graphic below must be visited to enable an administrator with hmcoperator permissions to run HMC commands from another server using ssh?
A. "Change Network Settings" to open pott 22
B. "Remote Operation" to indicate that this HMC can beoperated from a remote host
C. "Remote Virtual Terminal" to enable virtual terminal connections for remotely connected HMC
D. "Manage Task and Resource Roles" to give the hmcoperator task role permission to ssh to the HMC from a remote host
Answer: A