1Y0-311 Exam - Citrix XenApp and XenDesktop 7.15 LTSR Advanced Administration

NEW QUESTION 1
A Citrix Engineer needs to give users access to a new application which requires the installation of an additional application in order to function correctly.
Which layer should the engineer use while layering this new application for the users?

• A. App Layer
• B. Prerequisite Layer
• C. Platform Layer
• D. Elastic Layer

Answer: B

NEW QUESTION 2
Scenario: A Citrix Engineer is designing a Provisioning Services environment based on the following environmental factors:
-A large number of target devices are spread over multiple subnets.
-The subnets include non-Provisioning Services machines that rely on starting up over the network -A security mandate prohibits the use of TFTP.
-Provisioning Services 7.6 Update 1 is being used to maintain LTSR compliance. Which Provisioning Services boot method is appropriate for the target devices?

• A. BDM ISO
• B. DHCP Options
• C. BIOS Embedded
• D. BDM Disk Partition

Answer: C

NEW QUESTION 3
A Citrix Engineer has enabled Local Host Cache in a XenDesktop Site to manage outage situations.
Which three resources are supported by the Local Host Cache at the time of a database outage? (Choose three.)

• A. Pooled VDI desktops created by Machine Creation Services (MCS)
• B. Server-Hosted applications
• C. Server-Hosted desktop
• D. Static (assigned) desktops
• E. Pooled VDI desktops created by Provisioning Services (PVS)

Answer: BCD

NEW QUESTION 4
Which two vDisk states allow a Citrix Engineer to make permanent changes to a VDisk? (Choose two.)

• A. Production version
• B. Test version
• C. Private mode
• D. Maintenance version
• E. Standard mode

Answer: AD

NEW QUESTION 5
Which vDisk change will always require the use of reverse imaging?

• A. Installing a new service pack on a Windows-based vDisk.
• B. Upgrading the Provisioning services target device software installed on the vDisk.
• C. Updating the NIC drivers on the vDisk.
• D. Making permanent registry changes to the vDis

Answer: C

NEW QUESTION 6
How does Fast Logoff in a Workspace Environment Management (WEM) infrastructure optimize the logoff experience for users?

• A. Improves roaming profile synchronization performance on logoff
• B. Allows processes to continue running in the background while user sessions appear to log off quickly
• C. Terminates hung application processes within 10 seconds of logging off
• D. Notifies the Delivery Controllers that pooled desktops are ready for assignment on logoff

Answer: A

NEW QUESTION 7
Scenario: A Citrix Engineer is managing a Provisioning Services Farm with the following specifications:
- A single Farm with one Site, with two Provisioning Services servers deployed with 8 vCPU each, which are supporting a total target devices in production.
-The ports and threads have been configured so that each server can stream concurrently to 250 devices each.
-Due to an upcoming merger, 250 more target devices must be supported by the existing Provisioning Services farm.
-The Provisioning Services servers must handle the extra capacity while aligning to Citrix leading practices for resiliency. Which step should the engineer perform to accomplish these requirements?

• A. Isolate the Provisioning Services screaming traffic.
• B. Add two additional Provisioning Services servers to the Site.
• C. Maintain the existing configurations for the environment.
• D. Add one additional Provisioning Services server to the Sit

Answer: B

NEW QUESTION 8
Scenario: A XenApp Administrator implemented the pre-launch feature for a corporate email application. As the administrator monitors users' sessions in the AppCenter, the administrator notices that no pre-launch sessions are being created. Application launch time continues to remain high.
What are two reasons why pre-launch sessions are NOT being created? (Choose two.)

• A. One of the Citrix XenApp servers is reporting a full load.
• B. Endpoint devices are NOT using the latest Citrix Receiver version.
• C. The administrator did NOT create a pre-launch published application.
• D. XenApp Enterprise Edition licenses are being used in the environmen

Answer: BC

NEW QUESTION 9
Scenario: A Citrix Engineer is managing a XenApp and XenDesktop environment that has been built with the following site architecture:
-Site A was created in datacenter -Site B was created in datacenter
-A NetScaler Gateway is set up in each datacenter. Each Gateway has access to both Sites. -The StoreFront server group in each Site is configured to enumerate resources from both Sites. -Application A is available in Site A only.
-Optimal Gateway Routing has NOT been configured.
A user located near datacenter B logs in through NetScaler and attempts to launch Application A. Which behavior is expected in this scenario?

• A. Resource enumeration and the HDX connection are established using Gateway.
• B. Resource enumeration occurs through Gateway A; the HDX connection is established using Gateway
• C. Resource enumeration occurs through Gateway B; the HDX is established using Gateway
• D. Resource enumeration and the HDX connection are established using Gateway

Answer: C

NEW QUESTION 10
Scenario: A XenApp Administrator has configured Multi-stream ICA in an environment. A user reports performance issues and the administrator discovers that Multi-stream ICA is NOT active for that user's session.
What should the administrator do to resolve this issue?

• A. Change the color quality to 16-bit.
• B. Ensure that port 1494 is available.
• C. Adjust the progressive compression level.
• D. Upgrade to the latest version of Citrix Receive

Answer: D

NEW QUESTION 11
What is the default auto-launch behavior for published applications and desktops within a XenApp and XenDesktop environment?

• A. If a single application is published to the user, it will launch automatically.
• B. No published applications or desktops launch automatically.
• C. If a single desktop is published to the user, it will launch automatically.
• D. All published applications launch automatically.
• E. All published desktops launch automatically.

Answer: C

NEW QUESTION 12
Which three actions are necessary when using the versioning vDisk update process? (Choose three.)

• A. Perform updates using a single target device.
• B. Make a full copy of the vDisk.
• C. Put the vDisk into Private mode.
• D. Create a maintenance version of the vDisk
• E. Promote the changes to production.
• F. Update the properties of the production target devices to use the updated vDis

Answer: CDE

NEW QUESTION 13
Which update requires a Citrix Engineer to reverse image a vDisk?

• A. Target device software
• B. Hypervisor tools
• C. Anti-virus software
• D. OS service pack

Answer: A

NEW QUESTION 14
Which role should a Citrix Engineer assign to an administrator who needs to change vDisk properties, while also minimizing other permissions assigned to that administrator?

• A. Device Operator
• B. Device Administrator
• C. Site Administrator
• D. Farm Administrator

Answer: B

NEW QUESTION 15
How can a Citrix Engineer add a network printer to Workspace Environment Management (WEM)?

• A. Use the Management Agent Host Configuration ADMX template to specify the network printer location.
• B. Use the Import Network Print Server option to add the print server name, then connect to the network printer.
• C. Configure an XML printer list to add the print server, then connect to the network printer.
• D. Add the printer in the Control Panel portion of the environmental setting

Answer: B

NEW QUESTION 16
Scenario: Currently users log in to their desktop and are prompted several times for credentials while accessing XenApp published applications. The XenApp Administrator is asked to configure pass-through authentication to ensure that users only log in to their desktop and will NOT get prompted anymore.
Which three components will need to be configured when setting up pass-through authentication? (Choose three.)

• A. Web Interface.
• B. ICAClient.ADM.
• C. Citrix Receiver.
• D. XenApp Servers.
• E. Citrix User policy.
• F. Citrix Single sign-o

Answer: ABC