Master the 1Y0-402 Exam Questions and Answers content and be ready for exam day success quickly with this 1Y0-402 Dumps Questions. We guarantee it!We make it a reality and give you real 1Y0-402 Free Practice Questions in our Citrix 1Y0-402 braindumps. Latest 100% VALID 1Y0-402 Exam Questions and Answers at below page. You can use our Citrix 1Y0-402 braindumps and pass your exam.
Check 1Y0-402 free dumps before getting the full version:
NEW QUESTION 1
Scenario: A Citrix Architect has designed an active/passive XenApp and XenDesktop environment for a customer, where the passive datacenter serves as the disaster recovery datacenter for all users.
The following has been configured:
NetScaler Global Server Load Balancing (GSLB) to provide single URL direction to the active datacenter. GSLB has health monitors configured for the load balanced servers. NetScaler Gateways are on both datacenters. NetScaler load balancing occurs for StoreFront and Delivery Controller XML services. A single XenApp and XenDesktop Site exists. Four Delivery Controllers are members of the Site. Two Delivery Controllers are members of the primary zone in the active datacenter. Two Delivery Controllers are members of the satellite zone in the passive datacenter. SQL is deployed in the active datacenter. Local Host Cache is enabled. Two StoreFront servers are deployed in each datacenter aggregating resources from the Delivery Controllers in the respective datacenter. Virtual Delivery Agent (VDA) machines are deployed in both datacenters and configured to register with Delivery Controllers in their zone.
What would happen if the SQL Server in the primary datacenter were turned off?
- A. VDA machines from the primary datacenter would register with the Delivery Controllers in the passive datacenter.
- B. GSLB will NOT identify that the SQL Server is down and sessions cannot launch.
- C. StoreFront in the primary datacenter would still be able to launch sessions.
- D. GSLB will start redirecting connections to the secondary datacenter.
Answer: A
NEW QUESTION 2
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The following design requirements have been identified:
Later in the Assess phase, the architect creates the Access Matrix shown in the Exhibit. Click the Exhibit button to view the Access Matrix.
During the quality assurance review, the architect determines that one of the user groups does NOT align with the design requirements. External Partner users should be denied access to published resources unless connecting from a corporate laptop running up-to-date antivirus software. External users and partners authenticate using Two-Factor authentication. External employees are logged off Citrix Receiver for Web after 10 minutes of inactivity. Clipboard mapping is enabled for external engineering users. Once authenticated to a company device, internal users do NOT authenticate a second time to access published apps and desktops.
Which user group should the architect modify to match the design requirements identified?
- A. HR
- B. Engineering
- C. Call Center
- D. Partners
- E. Sales
Answer: C
NEW QUESTION 3
Scenario: While assessing the User Layer, a Citrix Architect finds that most of the internal users connect using corporate-owned laptops, desktop devices, and thin clients. Many of these laptops and desktop devices are running Windows 10, while the remainder of the machines are running Windows 7 and are in the process of being migrated to Windows 10. Some users also connect using personal devices which have Receiver Desktop Lock installed.
Currently, Citrix Receiver is manually installed on any endpoint device added to the company. All these devices use Citrix Receiver version 4.8 and above. The IT team is planning to automate a process to update all the devices with the latest version of Citrix Receiver and to automate another process for automatic installation of Citrix Receiver without incurring extra costs and maintenance.
During the initial testing of the Citrix Receiver Auto-Update feature, the architect observed that the Citrix Receiver Auto-Update feature does NOT work on some of the machines.
Which two reasons could be causing this issue? (Choose two.)
- A. Citrix Receiver was locally installed with administrator-level privileges.
- B. The Group Policy Object for Receiver Auto-Update feature is incorrectly configured in Active Directory.
- C. Citrix Receiver Auto-Update is disabled on machines where Receiver Desktop Lock is installed.
- D. The Citrix Receiver Auto-Update feature needs to be configured before Receiver Desktop Lock is configured.
Answer: BC
NEW QUESTION 4
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment for a financial services company. During the project kickoff meeting, the organization states the following business priorities:
"Overall, we want a robust solution which ensures that users can access their resources at any time, even if our primary datacenter experiences an outage. Our employees will need to access their resources from both inside and outside our corporate network, but we need to ensure that we enable this in a secure manner and protect our sensitive data."
Which four design decisions align with the organization's stated business drivers? (Choose four.)
- A. Redundancy should be implemented for all infrastructure components.
- B. Server OS Virtual Delivery Agent (VDA) machines should be used to increase user density per machine.
- C. Optimal Gateway Routing should be configured on StoreFront.
- D. NetScaler will be required in the environment.
- E. A multi-Site architecture and disaster recovery plan will be required.
- F. Single image management should be included in the design.
- G. SmartAccess or SmartControl features should be considered for this environment.
Answer: BCDG
NEW QUESTION 5
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the Resource Layer requirements shown in the Exhibit.
Click the Exhibit button to view the requirements.
Which feature of Citrix Profile Management could help the architect address the Graphic Designers group requirements?
- A. Profile caching
- B. Profile streaming
- C. File exclusions
- D. Active Write Back
Answer: B
NEW QUESTION 6
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the User Layer requirements, as shown in the Exhibit.
Click the Exhibit button to view the requirements.
Additionally, management at the organization has identified the following general Access Layer requirements:
A multi-factor authentication method is required for any connections to the XenApp and XenDesktop environment originating from outside the corporate network. External connections must be authenticated by a NetScaler Gateway virtual server located in a DMZ network. Internal connection traffic should NOT leave the internal corporate network.
Which two authentication methods should the architect use for the Contractors group? (Choose two.)
- A. RADIUS authentication
- B. Smart Cards
- C. SAML authentication
- D. Domain pass-through
- E. Federated Authentication Service
- F. Username and password
Answer: CE
NEW QUESTION 7
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has identified the Resource Layer requirements shown in the Exhibit. Click the Exhibit button to view the requirements.
Which Citrix Profile Management feature can help the architect address the Accountants group requirements?
- A. Profile streaming
- B. File exclusions
- C. File inclusions
- D. Profile caching
Answer: D
NEW QUESTION 8
Scenario: A Citrix Architect is designing a XenDesktop environment. The Engineer group uses graphical applications which require the use of AMD hardware shared virtualized GPU. Which two hypervisors can the architect select? (Choose two.)
- A. XenServer 6.5
- B. VMware vSphere 5.5
- C. XenServer 7.0
- D. VMware vSphere 6.0
- E. Microsoft Hyper-V Server 2012 R2
Answer: AC
NEW QUESTION 9
Scenario: A Citrix Architect is designing hardware requirements for a small production XenApp and XenDesktop environment.
Requirements:
Access to the environment hosted in a single datacenter Ability to perform maintenance on the environment without requiring an outage
Which hardware requirement does the architect need to include for hypervisor hosts in order to meet the customer's needs?
- A. Multiple individual hypervisor hosts in the same datacenter
- B. Separate hypervisor cluster/pool in an alternate datacenter
- C. Separate hypervisor clusters/pools in the same datacenter
- D. N+1 hypervisor hosts in a single cluster/pool
Answer: C
NEW QUESTION 10
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the User Layer requirements, as shown in the Exhibit.
Click the Exhibit button to view the requirements.
Additionally, management at the organization has identified the following general Access Layer requirements: A multi-factor authentication method is required for any connections to the XenApp and XenDesktop environment originating from outside the corporate network. External connections must be authenticated by a NetScaler Gateway virtual server located in a DMZ network. Internal connection traffic should NOT leave the internal corporate network.
Which Access Layer feature should the architect configure to meet the security requirements of the Accountants group?
- A. SmartControl
- B. Endpoint analysis scan
- C. SmartAccess
- D. Federated Authentication Service
Answer: A
NEW QUESTION 11
Scenario: A Citrix Architect needs to assess a XenApp and XenDesktop environment. The XenApp and XenDesktop diagram in the Exhibit gives details about the current Site and Zone design.
Click the Exhibit button to view the diagram.
What should the architect recommend based on the current Site and Zone design?
- A. Add an additional Delivery Controller to the Primary Zone.
- B. Replace Satellite Zone 2 with a separate XenDesktop Site.
- C. Add additional StoreFront servers to Satellite Zone 2.
- D. Replicate the XenDesktop Site database to Satellite Zone 2.
Answer: A
NEW QUESTION 12
Scenario: A Citrix Architect must complete a XenApp and XenDesktop security assessment. After examining the network topology for the hypervisor hosts supporting the Virtual Delivery Agent (VDA) machines, the architect finds that some of the network connections are NOT following leading security practices.
Click the Exhibit button to view a high-level diagram which shows the connectivity between various components.
Which three of the labeled areas of the diagram represent connections which are NOT following Citrix leading security practices? (Choose three.)
- A. G
- B. B
- C. A
- D. E
- E. F
- F. D
- G. C
Answer: DEF
NEW QUESTION 13
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the Resource Layer requirements shown in the Exhibit.
Click the Exhibit button to view the requirements.
Additionally, management at the organization has identified the following general Resource Layer
requirements: The profile solution should minimize logon and logoff times as much as possible. The time required to configure and maintain the solution should be minimized. User groups do NOT need to use the same profile type.
Which profile type should the architect use for the Customer Service group?
- A. Microsoft roaming
- B. Mandatory
- C. Local
- D. Citrix Profile Management
Answer: C
NEW QUESTION 14
Scenario: The IT team of a company needs to migrate to Microsoft Azure and has asked a Citrix Architect for a solution that offers protection from datacenter level failures.
What should the architect recommend the IT team create in Microsoft Azure?
- A. Availability set with update domain
- B. Availability set with fault domain
- C. Resource group
- D. Availability zones
Answer: D
Explanation: Reference https://docs.microsoft.com/en-us/azure/virtual-machines/windows/manage-availability
NEW QUESTION 15
Simplify management
Later in the design process, the architect documents the design decisions shown in the Exhibit (only some are shown).
Click the Exhibit button to view the design decisions.
During the quality assurance review, the architect observes that one of these design decisions does NOT align with the business driver priorities.
Which design decision should be changed to match the prioritization of the business drivers?
- A. Images
- B. Profiles
- C. Authentication Methods
- D. Citrix Policies
Answer: A
Explanation: 2. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
Click the Exhibit button to view information collected by the architect during the Resource Layer discussions.
Based on the requirements, the Citrix Administrative team should use ____ to manage Citrix policies and ____ to manage Microsoft settings. (Choose the correct option to complete the sentence.)
A. Citrix Studio; Workspace Environment Manager
B. Active Directory Group Policy Objects; Active Directory Group Policy Objects
C. Citrix Studio; Local Policies
D. Active Directory Group Policy Objects; Workspace Environment Manager
E. Citrix Studio; Active Directory Group Policy Objects
3. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The customer previously installed all applications locally on managed laptops and desktops but is willing to evaluate other application delivery methods as part of the new deployment. The environment will be standardized on Windows 10 and Windows Server 2021 for the Virtual Delivery Agent (VDA) machines.
As part of an application analysis performed earlier in the project, the information in the Exhibit was collected regarding one of the required applications.
Click the Exhibit button to view the information.
Additionally, the customer has the following objectives:
Minimize the amount of additional infrastructure components. Minimize the server hardware required.
How should the architect install the application?
A. On an Application Layer using Citrix App Layering, be included in a layered image, and accessed through a virtual desktop session
B. Stream it to a VDA machine using Microsoft App-V and accessed through a virtual desktop session
C. Directly on a Server OS VDA machine and accessed from the endpoint as a published application
D. Directly on a VDA machine image and accessed through a virtual desktop session
E. Directly on endpoint devices and included in a virtual desktop session using the Local App Access feature
4. Scenario: A Citrix Architect needs to implement XenApp and XenDesktop. Based on the assessment and early stages of the design, the architect has identified the requirements as shown in the Exhibit.
Click the Exhibit button to view the requirements.
Which tier of storage should the architect consider implementing, based on the requirements in the Exhibit?
A. DAS
B. Local
C. SAN
D. NAS
NEW QUESTION 16
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The customer previously installed all applications locally on managed laptops and desktops but is willing to evaluate other application delivery methods as part of the new deployment. The environment will be standardized on Windows 10 and Windows Server 2021 for the Virtual Delivery Agent (VDA) machines.
As part of an application analysis performed earlier in the project, the information in the Exhibit was collected regarding one of the required applications.
Click the Exhibit button to view the information.
The customer has an additional objective to minimize the number of images that must be managed. How should the architect install the application?
- A. Directly on endpoint devices and included in a virtual desktop session using the Local App Access feature
- B. On an Application Layer using Citrix App Layering, be included in a layered image, and accessed through a virtual desktop session
- C. Directly on a Server OS VDA machine and accessed from the endpoint as a published application
- D. Stream it to a VDA machine using Microsoft App-V and accessed through a virtual desktop session
- E. On an Application Layer using Citrix App Layering then be presented to assigned users as an Elastic Layer during a virtual desktop session
Answer: B
NEW QUESTION 17
Scenario: A Citrix Architect needs to design a new XenDesktop environment for a client who does NOT currently have a Citrix environment. The project scope has NOT yet been determined, and the architect is about to start the Assess phase of the project.
In which order should the architect complete the four tasks of a typical assessment when following the Citrix methodology?
- A. Define the organization, Define the user groups, Define the applications, Define the project team.
- B. Define the user groups, Define the applications, Define the organization, Define the project team.
- C. Define the project team, Define the organization, Define the user groups, Define the applications.
- D. Define the organization, Define the project team, Define the user groups, Define the applications.
Answer: D
100% Valid and Newest Version 1Y0-402 Questions & Answers shared by Certleader, Get Full Dumps HERE: https://www.certleader.com/1Y0-402-dumps.html (New 70 Q&As)