200-150 Exam - DCICN Introducing Cisco Data Center Networking

certleader.com

We provide which are the best for clearing 200-150 test, and to get certified by Cisco DCICN Introducing Cisco Data Center Networking. The covers all the knowledge points of the real 200-150 exam. Crack your Cisco 200-150 Exam with latest dumps, guaranteed!

Cisco 200-150 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
How many simultaneously HD calls can be supported on a Cisco Meeting Server 1000?

  • A. 108
  • B. 48
  • C. 24
  • D. 96

Answer: D

NEW QUESTION 2
Which characteristic of the n+1 power redundancy mode is true?

  • A. It uses fully redundant PSUs supplied by a single circuit.
  • B. It uses fully redundant PSUs supplied by different circuits.
  • C. It uses one more PSU than required to power the chassis.
  • D. It uses the minimum number of PSUs required to power.

Answer: A

NEW QUESTION 3
What are two physical components of the Cisco UCS B-Series server? (Choose two.)

  • A. mezzanine slots
  • B. power supplies (maximum of two)
  • C. lockable front door
  • D. redundant hot swappable fans
  • E. CPU sockets

Answer: AD

NEW QUESTION 4
Which management solution works with endpoints registered to UCM, VCS and Expressway?

  • A. TMS
  • B. Time
  • C. CMA
  • D. CMR

Answer: B

NEW QUESTION 5
Switch A has BPDU fitering configured on all active interfaces. A second switch, Switch B, is connected to Switch A. Which two actions will Switch A take when Switch B is connected to it? (Choose two.)

  • A. Switch A will not send any BPDUs.
  • B. Switch A will transition the port a normal spanning tree port.
  • C. Switch A will not accept any BPDUs
  • D. Switch A will errdisable the port.
  • E. Switch A will start sending BPDUs to Switch B.

Answer: AD

NEW QUESTION 6
What is a function of an endpoint?

  • A. To join 3 or more participants in a meeting.
  • B. To act us a traffic cop fornetwork communication.
  • C. To schedule calls.
  • D. To provide an audio and video interlace for the user.

Answer: D

NEW QUESTION 7
Which OSI reference model layer provides flow control, sequencing, and acknowledgments?

  • A. transport
  • B. data link
  • C. session
  • D. presentation

Answer: A

NEW QUESTION 8
Which premise-based conferencing solution works with Conductor, TMS and WebEx to create CMR Hybrid solutions?

  • A. MSE8000
  • B. Cisco Meeting Server
  • C. Spark
  • D. TelePresence Server

Answer: B

NEW QUESTION 9
Which system users intelligent Audio to cancel out background noise?

  • A. DX70
  • B. DX80
  • C. Spark
  • D. Jabber

Answer: B

NEW QUESTION 10
Drag and drop the FCoE protocols on the left to the correct descriptions on the right.
200-150 dumps exhibit

    Answer:

    Explanation: DCBXP =used to announce, exchange, and negotiate node parameters between peers ETS = provides prioritized processing based on bandwidth allocation
    PFC = Flow control mechanism
    FIP =perform device discovery, initialization, and link maintenance

    NEW QUESTION 11
    When command set will create an access control 1st on a Cisco Nexus switch to permit only unencrypted Web traffic from any source to destination host 10.10.1.110?

    • A. N5K-A(config)#access-list 101 permit tcp any host 10.10.1.110 eq 80
    • B. N5K-A(config)# Ip access-list 101N5K-A(config-acl)# permit tcp any host 10.10.1.110 eq 80 N5K-A(config-acl)# permit Ip any any
    • C. N5K-A(config)#Ip access-list 101N5K-A(config-acl)# permit tcp any host 10.10.110 eq 80
    • D. N5K-A(config)#Ip access-list 101 permit tcp any host 10.10.1.100 eq 80 N5K-A(config)#Ip access-list 101 deny ip any any

    Answer: C

    NEW QUESTION 12
    What are three reasons that switches supersede bridges? (Choose three.)

    • A. Smaller frame buffers decrease latency.
    • B. Forward, filter, or flood frames.
    • C. Multiple simultaneous communications between ports.
    • D. Larger inspection engine allows for higher throughput.
    • E. Switches have many ports.

    Answer: BCE

    Explanation: http://docwiki.cisco.com/wiki/Bridging_and_Switching_Basics

    NEW QUESTION 13
    When the auto-MDIX is disabled, which two network configuration require a crossover cable?

    • A. hub-to-switch
    • B. switch-to-workstation
    • C. router-to-workstation
    • D. hub-to-router
    • E. Switch-to-router

    Answer: E

    NEW QUESTION 14
    What do Enterprise Settings on Cisco Spark determine?

    • A. API integration
    • B. How Connectors are integrated in a hybrid deployment.
    • C. BOT integration
    • D. Where user information comes from

    Answer: D

    NEW QUESTION 15
    What is a unique feature of Expressway?

    • A. Persistent content available to room participants.
    • B. Message, meet and calling for cloud-based solutions.
    • C. Advanced video routing on video-only networks.
    • D. Support of unified communications with contact center

    Answer: C

    NEW QUESTION 16
    Refer to the exhibit.
    200-150 dumps exhibit
    Cisco USC Manager generates a Call Home fault report. Which action do you take to resolve the issue?

    • A. Adjust the Chassis temperature threshold to a higher setting.
    • B. Verify that air flow through the Chassis correctly.
    • C. Ensure that power cables are connected to the fan assemblies of the UCS.
    • D. Remove the equipment that generates excessive hat near the top of the rack

    Answer: A

    Recommend!! Get the Full 200-150 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/200-150-dumps.html (New 177 Q&As Version)