P.S. Pinpoint 200-355 preparation are available on Google Drive, GET MORE: https://drive.google.com/open?id=11liaV-hHaju1YtML8D_p8M7k6SBXIf0G
New Cisco 200-355 Exam Dumps Collection (Question 4 - Question 13)
Q4. A customer has completed the installation of an 802.11ac greenfield deployment at their corporate headquarters. They would like to leverage 802.11ac enhanced speeds on the trusted employee WLAN. In order to configure the employee WLAN, what Layer 2 security policies are valid?
A. WPA2 (TKIP)
B. WPA(AES)
C. OPEN
D. WEP
Answer: C
Q5. Which Cisco AnyConnect module provides wireless connectivity?
A. telemetry
B. web security
C. VPN
D. NAM
E. DART
F. posture
G. CSSC
Answer: D
Q6. A help desk ticket states that a wireless access point has not joined its controller and is flashing rapidly. How can the help desk administer the access point with the default settings?
A. console
B. SSH
C. Telnet
D. HTTP
E. HTTPS
Answer: A
Q7. What is the EIRP value for a transmitter that has a transmitter capable of 15 dBm, an antenna that has a gain of 12 dBi, and a cable that connects the transmitter to the antenna that has 1 db loss?
A. 26 dBm
B. 100 mW
C. .86 dBm
D. 165 dBm
E. 1000 mW
Answer: A
Topic 2, Exam Bank B
127.Refer to the exhibit.
What does the yellow shield with the exclamation mark indicate?
A. The network uses open authentication and no encryption.
B. The network uses an unsupported channel.
C. The signal is too distorted to connect.
D. The AP that is transmitting this SSID uses the wrong RF domain.
E. This is the ad-hoc network.
Q8. The administrator needs to create a report that shows all controllers, APs, and Cisco 3300
Series MSEs in the WLAN, including hardware and software information. Which report includes this information?
A. Device > Inventory
B. Mesh > Nodes
C. Network Summary > Executive Summary
D. Network Summary > 802.11 Summary
Answer: A
Q9. A customer wants to deploy a mesh network with 2 root access points and 10 mesh access points. The root access points should be configured as which mode on the WLC?
A. mesh
B. FlexConnect
C. bridge
D. rouge detection
E. sniffer
Answer: C
Q10. Which two attributes must be configured to match in order for WLCs to operate in the same mobility group? (Choose two.)
A. mobility domain name
B. virtual IP address
C. service interface address
D. hardware model
E. software version
Answer: A,B
Q11. Which Cisco WLC command family can help to troubleshoot communication between an AP and the WLC?
A. (Cisco Controller) >debug capwap
B. (Cisco Controller) >debug ap
C. (Cisco Controller) >debug cac
D. (Cisco Controller) >debug dot11
Answer: A
Q12. You need to set up an ad hoc connection to another client in a conference room to exchange files using Windows 7. Which two items do you need to create this connection? (Choose two.)
A. SSID name
B. RF channel
C. 802.1X/EAP credentials
D. pre-shared key
E. Telnet
F. IBSS name
G. SSH
Answer: D,F
Q13. An engineer wants to deploy a 2504 controller as the anchor controller for a guest WLAN that resides on a 5508 controller in a different mobility group. What configuration change must be applied to support this deployment strategy?
A. UDP 16666 and IP Protocol 97 must be enabled on the 2504 controller
B. UDP 5246 and TCP Protocol 97 must be enabled on the router
C. The 2504 controller must be added to the same mobility group as the 5508.
D. DHCP Option 43 must be added to the neighboring switchport
Answer: C
100% Rebirth Cisco 200-355 Questions & Answers shared by Thedumpscentre, Get HERE: http://www.thedumpscentre.com/200-355-dumps/ (New 433 Q&As)