Cause all that matters here is passing the F5-Networks 201 exam. Cause all that you need is a high score of 201 TMOS Administration exam. The only one thing you need to do is downloading Ucertify 201 exam study guides now. We will not let you down with our money-back guarantee.
Also have 201 free dumps questions for you:
NEW QUESTION 1
A BIG-IP Administrator reviews the log files to determine the cause of a recent problem and finds the following entry.
Mar 27.07.58.48 local/BIG-IP notice mcpd {5140} 010707275 Pool member 172.16.20.1.10029 monitor status down.
What is the cause of this log message?
- A. The pool member has been disabled.
- B. The pool member has been marked as Down by the BIG-IP Administrator.
- C. The monitor attached to the pool member needs a higher timeout value.
- D. The monitor attached to the pool member has failed.
Answer: D
NEW QUESTION 2
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool is marked available. If a pool is marked available (green) which situation is sufficient to cause this?
- A. All of the pool member nodes are responding to the ICMP monitor as expected.
- B. Less than 50% of the pool member nodes responded to the ICMP echo request.
- C. All of the members of the pool have had their content updated recently and their responses no longer match the monitor.
- D. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monito
- E. The other respond as expected.
Answer: D
NEW QUESTION 3
Refer to the exhibit. The BIG-IP Administrator needs to avoid overloading any of the Pool Members with connections, when they become active.
What should the BIG-IP Administrator configure to meet this requirement?
- A. Different Ratio for each member
- B. Same Priority Group to each member
- C. Action On Service Down to Reselect
- D. Slow Ramp Time to the Pool
Answer: D
NEW QUESTION 4
The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?
- A. Create a new VLAN object and set Customer Tag to 120
- B. Create a new VLAN object and assign the interface 1.1 untagged
- C. Create a new trunk object with interface 1.1 assigned
- D. Create a new trunk object and assign it to the VLAN
Answer: B
NEW QUESTION 5
A BIG-IP Administrator needs to make sure that the automatic update check feature works properly. What must the administrator configure on the BIG-IP system?
- A. Update Check Schedule
- B. NTP servers
- C. DNS name servers
- D. SMTP servers
Answer: A
NEW QUESTION 6
A BIG-IP Administrator wants to add a new Self IP to the BIG-IP device. Which item should be assigned to the new Self IP being configured?
- A. Interface
- B. Route
- C. VLAN
- D. Trunk
Answer: C
NEW QUESTION 7
A BIG-IP Administrator notices that one of the servers that runs an application is NOT receiving any traffic. The BIG-IP Administrator examines the configuration status of the application and observes the displayed monitor configuration and affected Pool Member status.
What is the possible cause of this issue?
- A. The Node Health Monitor is NOT responding.
- B. The application is NOT responding with the expected Receive String.
- C. HTTP 1.1 is NOT appropriate for monitoring purposes.
- D. The BIG-IP device is NOT able to reach the Pool.
Answer: A
NEW QUESTION 8
As a part of the Setup Utility, the administrator sets the host name for the BIG IP. What would be the result if the two systems in a redundant pair were set to the same host name?
- A. Host names do not matter in redundant pair communication.
- B. In a redundant pair, the two systems will always have the same host nam
- C. The parameter is synchronized between the systems.
- D. The first time the systems are synchronized the receiving system will be assigned the same self-IP addresses as the source system.
- E. When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.
Answer: C
NEW QUESTION 9
A VLAN has the following objects configured:
Self-IP 10.10.10.100 with port lockdown set to Allow default Virtual server 10.10.10.100:443 with UDP profile enabled Virtual server 10.10.10.0/24 port forwarding virtual server
Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
Which object will process this request when https://10.10.10.100 is entered into a browser?
- A. self-IP 10.10.10.100 with port lockdown set to Allow default
- B. virtual server 10.10.100/24 port o forwarding virtual server
- C. global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
- D. virtual server 10.10.10.100.443 with UDP profile enabled
Answer: A
NEW QUESTION 10
A BIG-IP Administrator needs to purchase new licenses for a BIG-IP appliance.
The administrator needs to know if a module is licensed and the memory requirement for that module. Where should the administrator view this information in the System menu?
- A. Resource Provisioning
- B. Configuration > Device
- C. Software Management
- D. Configuration >OVSDB
Answer: A
NEW QUESTION 11
What is the purpose of MAC masquerading?
- A. to prevent ARP cache errors
- B. to minimize ARP entries on routers
- C. to minimize connection loss due to ARP cache refresh delays
- D. to allow both BIGIP devices to simultaneously use the same MAC address
Answer: C
NEW QUESTION 12
Which two statements are true concerning the default communication between a redundant pair of BIG-IP systems? (Choose two.)
- A. Synchronization occurs via a TCP connection using ports 683 and 684.
- B. Connection mirroring data is shared via a TCP connection using port 1028.
- C. Persistence mirroring data is shared via a TCP connection using port 1028.
- D. Connection mirroring data is shared through the serial fail over cable unless network failover is enabled.
Answer: BC
NEW QUESTION 13
During a maintenance window, an EUD test was executed and the output displayed on the screen. The BIG-IP Administrator did NOT save the screen output. The BIG-IP device is currently handling business critical traffic. The BIG-IP Administrator needs to minimize impact. What should the BIG-IP Administrator do to provide the EUD results to F5 Support?
- A. Boot the device into EUD then collect output from console
- B. Execute EUD from tmsh and collect output from console
- C. Collect file /var/log/messages
- D. Collect file /shared/log/eud.log
Answer: D
NEW QUESTION 14
Which two statements are true about SNATs? (Choose two.)
- A. SNATs are enabled on all VLANs, by default.
- B. SNATs can be configured within a Profile definition.
- C. SNATs can be configured within a Virtual Server definition.
- D. SNAT's are enabled only on the VLAN where origin traffic arrives, by default.
Answer: AC
NEW QUESTION 15
When configuring a Virtual Server to use an iRule with an HTTP_REQUEST event, which lists required steps in a proper order to create all necessary objects?
- A. create profiles, create the iRule, create required pools, create the Virtual Server
- B. create the Virtual Server, create required pools, create the iRule, edit the Virtual Server
- C. create a custom HTTP profile, create required pools, create the Virtual Server, create the iRule
- D. create required pools, create a custom HTTP profile, create the iRule, create the Virtual Server
Answer: B
NEW QUESTION 16
A configuration change is made on the standby member of a device group.
What is displayed as "Recommended Action" on the Device Management Overview screen?
- A. Force active member of device group to standby
- B. Activate device with the most recent configuration
- C. Synchronize the active member configuration to the group.
- D. Synchronize the standby member configuration to the group
Answer: D
NEW QUESTION 17
......
Thanks for reading the newest 201 exam dumps! We recommend you to try the PREMIUM Surepassexam 201 dumps in VCE and PDF here: https://www.surepassexam.com/201-exam-dumps.html (254 Q&As Dumps)