Act now and download your today! Do not waste time for the worthless tutorials. Download with real questions and answers and begin to learn with a classic professional.
Also have 210-065 free dumps questions for you:
NEW QUESTION 1
When a call is placed from a Cisco VCS registered SIP-only endpoint to an H.323-only endpoint, which type of call license is consumed?
- A. traversal call
- B. non-traversal call
- C. on-net call
- D. interworking call
- E. off-net call
- F. Cisco Unified Workspace Licensing
Answer: A
NEW QUESTION 2
When you are on a call that is hosted on a Cisco TelePresence MCU, which function is enabled when you enter the numeric sequence *6?
- A. request the floor
- B. mute/unmute audio
- C. merge another call
- D. cycle layout options
Answer: B
NEW QUESTION 3
Which kind of cable is used to daisy chain one PrecisionHD camera to another?
- A. HDMI cable
- B. standard Ethernet cable
- C. DB9 to RJ45 cable
- D. VISCA control cable
Answer: D
NEW QUESTION 4
Refer to the exhibit.
Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two.)
- A. The Cisco Unified Communications Manager IM and Presence Service is not available.
- B. The username and password in Cisco Jabber phone services are misconfigured.
- C. The Cisco Jabber initial audio and video settings need to be set.
- D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager.
- E. The Cisco Jabber does not have the correct phone button template and hence cannot register to the Cisco Unified Communications Manager.
- F. The called user presence status is unknown.
Answer: BD
NEW QUESTION 5
An engineer wants to know if there is a way to determine remotely what is the optical zoom of the camera directly connected to a Cisco TelePresence SX20. Which two methods will retrieve this information? (Choose two.)
- A. From the CLI, run xconfig
- B. From the web GUI, choose Configuration > Camera > Status
- C. From the CLI, run xstatus
- D. From the web GUI, choose Configuration > System Status > Camera
- E. From CLI, run xcommand camera
Answer: CD
NEW QUESTION 6
Which three features does Cisco VCS provide? (Choose three.)
- A. native Cisco SCCP telephony integration
- B. SIP-H.323 interworking functionality
- C. native scheduling
- D. SIP trunk integration with Cisco Unified Communications Manager
- E. third-party standards-based H.323 and SIP device registration
- F. reverse proxy functionality
Answer: BDE
NEW QUESTION 7
A network administrator is troubleshooting a video issue from the Cisco VCS CLI and wants to see the ongoing calls. Which command should the administrator use?
- A. xconfiguration calls
- B. xcommand calls
- C. xcalls status
- D. xstatus calls
Answer: D
NEW QUESTION 8
Which two of these support an ad-hoc conference call? (Choose two.)
- A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresenceVideo Communications Server
- B. using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5 minutes
- C. using the Booking tab in the Cisco TelePresence Management Suite to configure a new conference
- D. using the tab Administrative Tools > Configuration > Conference Settings in the Cisco TelePresence Management Suite
- E. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call
Answer: AE
NEW QUESTION 9
A video engineer has opened a ticket with Cisco TAC for support and the TAC engineer has requested system information such as software version of Cisco VCS. Where does the video engineer find this information?
- A. System
- B. Maintenance
- C. Configuration
- D. Status
Answer: D
NEW QUESTION 10
On a Cisco C-Series codec, where would a technician go to configure the wallpaper?
- A. Configuration > User Administration
- B. Configuration > Personalization
- C. Configuration > Peripherals
- D. Configuration > System Configuration
Answer: B
NEW QUESTION 11
Which Cisco TelePresence multipoint platform utilizes only Cisco Unified Communications Manager for call control?
- A. Cisco TelePresence Multipoint Control Unit
- B. Cisco TelePresence Multipoint Switch
- C. Cisco TelePresence Server
- D. Cisco TelePresence Media Bridge Server
- E. Cisco TelePresence System 500-32
- F. Cisco TelePresence SX20
Answer: B
NEW QUESTION 12
Refer to the exhibit.
Which option performs a factory reset of a Cisco TelePresence System endpoint?
- A. Configuration > System Settings
- B. Configuration > Security Settings
- C. Troubleshooting > Hardware setup
- D. Monitoring
- E. Troubleshooting > Configuration Issues
- F. Troubleshooting > System Restart
- G. ACisco TelePresence System endpoint can be reset only via CLI.
Answer: E
NEW QUESTION 13
Which two statements about PoE support on Cisco Video Surveillance 6000 Series IP Cameras are true? (Choose two.)
- A. PoE is not supported on the Cisco 6000 Series IP Cameras, and you must use a Cisco 12 VDC power adapter.
- B. PoE is not supported on the Cisco 6000 Series IP Cameras, and you must use third- party 24 VAC power adapter.
- C. The port switch must be 802.3at-compliant to power the camera.
- D. The port switch must be 802.3af-compliant to power the camera.
- E. The Cisco 6000 Series IP Camera requires a network cable and a connection to a standard 10/100BaseT-compliant PoE router or switch.
Answer: DE
NEW QUESTION 14
Refer to the exhibit.
Which SIP URI should be dialed in order to reach the endpoint that is registered with the IP address of 172.29.1.221 from another endpoint with a URI of sip:e20@dca256.test?
- A. 52900121
- B. sip:ex90@osl147.local
- C. ex90@osl148.local
- D. 172.29.1.221
- E. ex90
Answer: B
NEW QUESTION 15
Refer to the exhibit.
Which configuration element can be used to specify the Multiway address that can be used by the endpoint to initiate Multiway calls?
- A. Conference 1
- B. NetworkServices
- C. Provisioning
- D. SIP Profile 1
- E. Video
Answer: B
NEW QUESTION 16
Refer to the exhibit.
An H.323 endpoint that is registered to Cisco VCS Control is not able to make B2B calls. Calls to other internal endpoints are working fine. What is the likely cause of the issue?
- A. The Conductor H.323 zone is set to "Off."
- B. The Traversal Zone H.323 zone is set to "Off."
- C. The Production CUCM H.323 zone is set to "Off."
- D. The Traversal Zone H.323 zone is in a "Failed" state.
Answer: B
NEW QUESTION 17
Which two parameters of the license management set log level product_instances CLI command on the Cisco Prime License Manager are valid? (Choose two.)
- A. warning
- B. error
- C. emergencies
- D. critical
- E. alert
Answer: AB
NEW QUESTION 18
In the web interface for a Cisco VCS or Expressway running X8.2, which page allows you to enable and download logs that include the xConfiguration, xStatus, DEBUG level network logs, and packet captures of both network interfaces?
- A. Maintenance > Diagnostics > Diagnostic Logging
- B. Maintenance > Diagnostics > System Snapshot
- C. Status > Logs > Event Log
- D. Status > Logs > Configuration Log
Answer: A
P.S. Easily pass 210-065 Exam with 377 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy 210-065 Dumps: https://www.2passeasy.com/dumps/210-065/ (377 New Questions)