Your success in is our sole target and we develop all our in a way that facilitates the attainment of this target. Not only is our material the best you can find, it is also the most detailed and the most updated. for Cisco 210-065 are written to the highest standards of technical accuracy.
Cisco 210-065 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
ACisco TelePresence VCS displays this alarm: "Root password is set to default." How can this security warning be addressed?
- A. Use the Cisco TelePresence VCS web user interface, choose Administration > User Settings, and change the root password.
- B. Use SSH to log in to the Cisco TelePresence VCS as Administrator and issue the command xconfig root set passwd.
- C. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command set password, and enter the new password when prompted.
- D. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command passwd, and enter the new password when prompted.
- E. Use the Cisco TelePresence VCS web user interface, choose Administration > System Settings, and change the root password.
Answer: D
NEW QUESTION 2
When you configure a zone for firewall traversal, which type of zone is the Cisco VCS-C configured for?
- A. client
- B. server
- C. proxy
- D. gateway
- E. neighbor
Answer: A
NEW QUESTION 3
Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS?
- A. Allow iX application media
- B. Send send-receive SDP in mid-call invite
- C. Allow presentation sharing using BFCP
- D. Allow presentation sharing using H.235
- E. Deliver conference bridge identifier
Answer: C
NEW QUESTION 4
Refer to the exhibit.
When this alarm is seen, what is the maximum number of registrations that a Cisco VCS can support?
- A. 2500
- B. 50
- C. 3
Answer: C
NEW QUESTION 5
Which bridge solution requires Cisco TelePresence Conductor?
- A. Cisco TelePresence Server operating in remotely managed mode
- B. Cisco TelePresence Server operating in locally managed mode
- C. Cisco TelePresence MCU operating in remotely managed mode
- D. Cisco TelePresence MCU operating in locally managed mode
Answer: A
NEW QUESTION 6
A user wants to use the One Button to Push feature on a Cisco TelePresence System 500- 32 video endpoint. Which configuration tool should be used to allow the One Button to Push feature to work?
- A. Cisco Unified Communications Manager server, phones, devices, One Button to Push
- B. Cisco Gigaswitch Router, Call Manager Express, One Button to Push
- C. Cisco TelePresence Manager Suite server, new conference, set Conference type to One Button to Push
- D. Active Directory server, users, new conference, One Button to Push
- E. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push
Answer: C
NEW QUESTION 7
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which two steps are required as part of this process? (Choose two.)
- A. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
- B. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
- C. Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20.
- D. Reboot the Cisco TelePresence SX20.
- E. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.
Answer: CE
NEW QUESTION 8
An engineer is configuring a live stream from a multiparty conference that users can watch live in their web browser. Which two products can provide native live streaming in this delivery format? (Choose two.)
- A. Cisco Video Communications Server
- B. Cisco TelePresence Server
- C. Cisco TelePresence MCU
- D. Cisco TelePresence Content Server
- E. Cisco Multiparty Media Server
- F. Cisco TelePresence Conductor
Answer: CD
NEW QUESTION 9
An administrator is troubleshooting an endpoint whose SIP Registration Status shows "Failed: 403 Forbidden" and must obtain information about the cause of the failure. To which two menu locations must an engineer navigate? (Choose two.)
- A. Endpoint > Log Files > messages.log
- B. Endpoint > Diagnostics > Log Files > all.log
- C. VCS > Maintenance > Diagnostics > Incident Reporting > View
- D. VCS > Status > logs > Configuration Log
- E. VCS > Status > logs > Event Log
Answer: DE
NEW QUESTION 10
On a video endpoint running TC software, which two SIP settings are the minimum needed to register the endpoint to a Cisco VCS? (Choose two.)
- A. URI
- B. loginname
- C. password
- D. E.164 address
- E. gatekeeper
- F. proxy address
- G. domain
Answer: AF
NEW QUESTION 11
When configuring the Cisco TelePresence System 500 with a static IP address, where should the IP address be configured?
- A. in Cisco Unified Communications Manager after adding the Cisco TelePresence System 500 manually
- B. in the Cisco TelePresence System Administration tool
- C. in the Cisco TelePresence Management Suite after the Cisco TelePresence System 500 was added under systems
- D. Static IP address configuration is not possibl
- E. Only a DHCP-provided IP address is supported.
- F. using the on-screen display
Answer: B
NEW QUESTION 12
Which application should be selected in the navigation pane to add an endpoint in Cisco Unified Communications Manager?
- A. Cisco Unified Serviceability
- B. Cisco Unified CM Administration
- C. Cisco Unified OS Administration
- D. Cisco Unified Reporting
Answer: B
NEW QUESTION 13
Which option describes how to configure SNMP settings on a CTS/TX endpoint?
- A. can be configured only via codec CLI
- B. can be configured only via codec GUI
- C. can be configured only in a device profile in Cisco Unified Communications Manager
- D. can be configured either via codec GUI or codec CLI
- E. can be configured in codec GUI, codec CLI, or device profile in Cisco Unified Communications Manager
Answer: C
NEW QUESTION 14
Which two of these are considered to be provisioning and scheduling management tools in a Cisco TelePresence environment? (Choose two.)
- A. Cisco TelePresence Manager
- B. Cisco Video Surveillance Operations Manager
- C. Cisco TelePresence Management Suite
- D. Cisco TelePresence Multipoint Control Unit
- E. Cisco Video Surveillance Management Server
Answer: AC
NEW QUESTION 15
What is the maximum number of servers that a Cisco TelePresence Content Server cluster can have?
- A. 6
- B. 7
- C. 8
- D. 10
- E. 12
Answer: D
NEW QUESTION 16
A user is unable to make a video call from an endpoint that is registered to the Cisco VCS. To isolate the cause, which two menu choices should the user check first? (Choose two.)
- A. Configuration > Call Policy
- B. Status > Registrations
- C. Status > Search History
- D. Status > System Information
- E. Configuration > Dial Plan > Search Rules
- F. Status > Event Log
Answer: CF
NEW QUESTION 17
Refer to the exhibit.
Which system tab can be used to add video infrastructure devices and endpoints?
- A. Navigator
- B. System Overview
- C. Configuration Templates
- D. Provisioning
- E. Administrative Tools
Answer: A
NEW QUESTION 18
Management wants to modify Cisco TMS to allow users to configure the call behavior with their associated devices and dial from a single ID. Which feature needs to be enabled and configured?
- A. Smart Scheduler
- B. Low-touch Provisioning
- C. FindMe
- D. CMR Provisioning
Answer: C
Recommend!! Get the Full 210-065 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/210-065-dumps.html (New 377 Q&As Version)