2V0-622 Exam - VMware Certified Professional 6.5 - Data Center Virtualization

certleader.com

It is impossible to pass VMware 2V0-622 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed . You will get a surprising result by our .

Online VMware 2V0-622 free dumps demo Below:

NEW QUESTION 1
An administrator is in the process of deploying a new ESXi host.
-The host is able to be added to the vCenter Server’s inventory, but after a short period of time it shows as disconnected.
-The administrator is able to reconnect the host but it then disconnects again after a short period of time. Which is the problem?

  • A. Port 902 UDP from the host to the vCenter Server is blocked
  • B. Port 443 TCP from the host to the vCenter Server is blocked
  • C. Port 902 TCP from the host to the vCenter Server is blocked
  • D. Port 443 TCP from the vCenter Server to the host is blocked

Answer: A

Explanation: On 902 port managed hosts send a regular heartbeat to the vCenter Server system. This port must not be blocked by firewalls between the server and the hosts or between hosts.

NEW QUESTION 2
An attempt to delete NFS datastore from an ESXI host returns the error: Sysinfo error on operation returned the following status: Busy
Which two statements could explain this failure? (Choose two.)

  • A. Storage IO Control is enabled on NFS datastore.
  • B. NFS datastore is a part of Storage DRS Cluster.
  • C. NFS datastore has running or registered virtual machines.
  • D. NFS.VolumeRemountFrequency value is set to 30.

Answer: AC

Explanation: The busy status indicated that either storage I/O control is enabled on NFS datastore or the NFS datastore is running on registered virtual machines. In both cases, sysinfo error on operation will be returned with busy status.

NEW QUESTION 3
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?

  • A. Add the VMs to a vApp.
  • B. Use a VM-Host affinity rule.
  • C. Place the VMs in different folders.
  • D. Use a VM-VM affinity rule.

Answer: D

NEW QUESTION 4
Which is required for configuring iSCSI Software Adapter network port binding?

  • A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
  • B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
  • C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
  • D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.

Answer: D

NEW QUESTION 5
Which is the minimum number of hosts required for a VMware vSAN cluster to be able to apply a vSAN RAID5 storage policy?

  • A. six hosts
  • B. three hosts
  • C. four hosts
  • D. five hosts

Answer: C

NEW QUESTION 6
A VM-Host affinity rule states that VM group “X” must run on hosts in group “Y”.
If all ESXi hosts in group “Y” fail, which is the resulting behavior with vSphere HA enabled?

  • A. The virtual machines in group “X” will failover to hosts that do not belong to group “Y”, but will vMotion back to hosts in group “Y” when they become available.
  • B. The virtual machines in group “X” will not failover to hosts that do not belong to group “Y”.
  • C. This scenario is not possible because vSphere HA and DRS cannot work together.
  • D. The virtual machines in group “X” will only fail over to hosts that do not belong to group “Y” if they are marked as “High” VM Restart Priority within vSphere HA.

Answer: B

NEW QUESTION 7
Which is the block size on the VMFS6 datastore?

  • A. All small and large file blocks are 8MB.
  • B. All small and large file blocks are 1MB.
  • C. Small file blocks are 512K
  • D. large file blocks are 64MB.
  • E. Small file blocks are 1MB, large file blocks are 512MB.

Answer: D

NEW QUESTION 8
Which is the purpose of VM Component Protection (VMCP)?

  • A. Reconnect virtual NICs that become disconnected
  • B. Respond when a datastore encounters a PDL or APD failure.
  • C. Restart applications when they are no longer running.
  • D. Respond when viruses are detected inside a virtual machine.

Answer: B

NEW QUESTION 9
Which two statements correctly describe VM-Host affinity rules? (Choose two.)

  • A. After creating a VM-Host affinity rule, its ability to function in relation to other rules is not checked.
  • B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
  • C. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
  • D. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules will be ranked.

Answer: AC

Explanation: If you create more than one VM-Host affinity rule, the rules are not ranked, but are applied equally. Be aware that this has implications for how the rules interact. For example, a virtual machine that belongs to two DRS groups, each of which belongs to a different required rule, can run only on hosts that belong to both of the host DRS groups represented in the rules.
When you create a VM-Host affinity rule, its ability to function in relation to other rules is not checked. So it is possible for you to create a rule that contacts with the other rules you are using. When two VM-Host affinity rules conflict, the older one takes precedence and the newer rule is disabled. DRS only tries to satisfy enabled rules and disabled rules are ignored.

NEW QUESTION 10
Which two statements correctly describe VM-VM affinity rules? (Choose two.)

  • A. vSphere DRS attempts to keep the virtual machines together on the same ESXi host.
  • B. When two VM-VM affinity rules conflict, the older one takes precedence and the newer rule is disabled.
  • C. vSphere DRS attempts to keep the virtual machines on separate ESXi hosts.
  • D. When two VM-VM affinity rules conflict, the newer one takes precedence and the older rule is disabled.

Answer: AB

NEW QUESTION 11
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)

  • A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
  • B. vSAN requires IPv6 only.
  • C. All hosts must have a dedicated 40GbE NIC.
  • D. The vSAN network supported IPv4 or IPv6.
  • E. vSAN requires IPv4 only.

Answer: AD

Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-AFF133BC-F4B
http://cormachogan.com/2014/01/21/vsan-part-15-multicast-requirement-for-networking-misconfiguration-detec

NEW QUESTION 12
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?

  • A. from the ESXi Host Client
  • B. from the VMware vSphere Appliance Management Interface
  • C. from within the VMware vSphere Web Client
  • D. from the vCenter Server Appliance Installer

Answer: D

NEW QUESTION 13
A security officer has issued a new directive that users will no longer have access to change connected network adapters to limit denial of service on a virtual machine.
Which two correct virtual machine advanced configuration parameters will accomplish this7 (Choose two.)

  • A. isolation.device.connectable.disable = "TRUE"
  • B. isolation.de.ice.edit.disable - "FALSE"
  • C. isolation.device.connectable.disable = "FALSE"
  • D. isolation.device.edit.disable = “TRUE”

Answer: AD

Explanation: Prevent a Virtual Machine User or Process from Disconnecting Devices in the vSphere Web ClientUsers and processes without root or administrator privileges within virtual machines have the capability to connect or disconnect devices, such as network adaptors and CD-ROM drives, as well as the ability to modify device settings. To increase virtual machine security, remove these devices. If you do not want to permanently remove a device, you can prevent a virtual machine user or process from connecting or disconnecting the device from within the guest operating system.
Valueisolation.device.connectable.disabletrue isolation.device.edit.disabletrue

NEW QUESTION 14
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?

  • A. Non
  • B. Backup Verification job is not a feature of vSphere Data Protection
  • C. It is a manual task- Power it on- Verify the guest OS- Check started applications
  • D. It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OS is booted by communicating with the Backup Verification agent
  • E. It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”

Answer: D

Explanation: Automated Backup Verification
Backup Verification jobs can be created in vSphere Data Protection. These jobs automate the process of restoring a virtual machine: powering it on; verifying the guest OS booted, by detection of VMware Tools “heartbeats”.

NEW QUESTION 15
When you attempt to open a virtual machine console from the vSphere Web Client, the console does not connect. The following error message appears:
2V0-622 dumps exhibit
Why did not connect?

  • A. Port 443 is in use.
  • B. Port 9443 is in use.
  • C. Port 8443 is in use.
  • D. Port 22443 is in use.

Answer: B

Explanation: Another program or process is using port 9443, the default port used by the HTML5 virtual machine console.

NEW QUESTION 16
During Fibre Channel adapter setup of a ESXi host, which configuration guideline should be considered?

  • A. Do not mix Fibre Channel adapter models to access the same LUN from a single host unless the default queue depth has been changed.
  • B. Do not mix Fibre Channel adapters from different vendors in a single host.
  • C. Use Fibre Channel adapters from different vendors in a single host.
  • D. Set the queue depth to 16 if using a mix of different vendors’ Fibre Channel adapters in all hosts in the cluster.

Answer: B

Explanation: Do not mix FC HBAs from different vendors in a single host. Having different models of the same HBA is supported, but a single LUN cannot be accessed through two different HBA types, only through the same type.

NEW QUESTION 17
Which feature facilitates the sharing of templates via vCenter Server?

  • A. OVF
  • B. vApp
  • C. Content Library
  • D. folders

Answer: C

Explanation: Content libraries are container objects for VM templates, vApp templates, and other types of files. vSphere administrators can use the templates in the library to deploy virtual machines and vApps in the sphere inventory. Sharing templates and files across multiple vCenter Server instances in same or different locations brings out consistency, compliance, efficiency, and automation in deploying workloads at scale.

NEW QUESTION 18
Which three TCP/IP stacks are built in at the VMkernel level in vSphere 6 x? (Choose three.)

  • A. Fault Tolerance
  • B. vMotion
  • C. Provisioning
  • D. Management
  • E. Default

Answer: BCE

NEW QUESTION 19
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit).
2V0-622 dumps exhibit
Which two statements can describe the cause of this activity? (Choose two.)

  • A. The network packet size is too large.
  • B. Disk latency is present on the datastore.
  • C. VMware Tools is not installed.
  • D. The network packet size is too small.

Answer: BD

Explanation: Network packet size is too small, which increases the demand for the CPU resources needed for processing each
packet.https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.monitoring.doc/GUID-C4EA86
Found this re disk latency:https://communities.vmware.com/thread/557063
The below also discusses Disk Performance issues and mentioned CPU usage:https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.monitoring.doc/GUID-E813116

P.S. Surepassexam now are offering 100% pass ensure 2V0-622 dumps! All 2V0-622 exam questions have been updated with correct answers: https://www.surepassexam.com/2V0-622-exam-dumps.html (276 New Questions)