Q1. What is the best tool to test end verify a dial plan during the implementing phase?
A. Translator X
B. CUCM Dialed Number Analyzer.
C. Real-Time Monitoring Tool.
D. Cisco Prime Collaboration Tool.
Answer: B
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/4_1_2/cdna412/dnai.html
Q2. Which dial plan function is used to restrict calls that are made by a lobby phone to internal extensionsonly?
A. Path selection.
B. Endpoint addressing.
C. Manipulation of dialed destination.
D. Calling privileges.
Answer: D
Q3. Where do you configure a SIP route pattern?
A. Call Routing > Route/Hunt > SIP Route Pattern
B. System > SIP Route Pattern
C. Call Routing > SIP Route Pattern
D. Advanced Features > SIP Route Pattern
Answer: C
Q4. Which three of these are characteristics of a Cisco Unified Communications Manager software- basedMedia Termination Point? (Choose three.)
A. The codec and packetization of both call legs must be identical.
B. This Media Termination Point type does not require any DSP resources on the Cisco router.
C. DSP resources are required.
D. It can provide G.711 mu-law to G.711 a-law conversion and vice versa.
E. It can provide packetization conversion for a given codec (for example, if one call leg is using a 20-mssampe size, but the other call legis using a 30-ms sample size).
F. This Media Termination Point type is typically used for RSVP agent configurations or Cisco Unified borderelementmedia flow-through configuration.
Answer: B,D,E
Q5. Which three options are components of Media Resources Architecture? (Choose three)
A. Music on hold.
B. Media Resource Manager.
C. Media Resource Group.
D. Route list.
E. Route group
F. Media Resource Group List.
Answer: B,C,F
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/media.html#wp11 06500
Q6. Which two features are advantages of deploying a cluster over WAN? (Choose two.)
A. Shared line appearances
B. CentralizedDSP resources
C. Extension mobility within the cluster
D. Scalability up to 20 sites, if thereis sufficient IP WAN bandwidth
E. Failover to co-resident Cisco UnifiedCall Manager Express platforms
Answer: A,C
Q7. What is the recommended default value that is used between regions for video calls?
A. 384 Kbps.
B. G.722.
C. G.711.
D. G.728.
Answer: A
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/ b02regio.html
Q8. Which discard digits instruction removes all digits prior to the North American Numbering Plan portion of the route pattern?
A. PreDot
B. PreAt
C. Pre
D. PreNANP
Answer: B
Q9. Which two types of encoding are available to configure a T1 controller for CAS?
A. AME.
B. ESF.
C. SF.
D. B8SF.
E. B8ZS.
F. AMI.
Answer: E,F
Explanation: Reference:
http://www.cisco.com/c/en/us/support/docs/voice/digital-cas/24642-cas-config.html
Q10. Refer to the exhibit.
What is the command to place the static IP address by CLI in the CiscoTelePresence MSE 8000?
A. MSE 8050: static 0 10.10.2.13 255.255.255.255 10.10.2.1 200.87.100.10 200.87.100.20.
B. MSE 8050: static 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
C. MSE 8050: static 1 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
D. MSE 8050: static ip 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
Answer: B