P.S. 100% Guarantee 300-075 cram are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wjr6WINeoF1GfJJTEUwbsPxy_oz_OK6s
New Questions 2
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones.
The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DNS Server:
Device Pool:
Expressway:
ILS:
Locations:
MRA:
Speed Dial:
SIP Trunk:
What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two.)
A. Media Resource Group List.
B. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
E. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.
Answer: C,D
New Questions 3
Which statement is true regarding the configuration of SAF Forwarder?
A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.
B. The client label that is configured in Cisco Unified Communications Manager must match the configuration on the SAF Forwarder router.
C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as SAF clients.
D. The destination IP address must match the loopback address of the SAF router.
Answer: A
New Questions 4
Which two options are configuration steps on Cisco Unified Communications Manager that are used when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: A,C
New Questions 5
In Cisco Unified Communications Manager, where do you configure the default bit rate for audio and video devices?
A. Enterprise Parameters
B. Region under Region Information
C. Cisco CallManager service under Service Parameter Configuration
D. Enterprise Phone Configuration
Answer: C
New Questions 6
Which three options are Cisco VCS zone types? (Choose three.)
A. H323
B. DNS
C. traversal client
D. gatekeeper
E. neighbor
F. SIP
Answer: B,C,E
New Questions 7
Which task must you perform before deleting a transcoder?
A. Delete the dependency records.
B. Unassign it from a media resource group.
C. Use the Reset option.
D. Remove the device pool.
E. Remove the subunit.
F. Delete the common device configuration.
Answer: B
New Questions 8
Which option configures the secondary dial tone option for SRST mode to let the users hear the dial tone for PSTN calls?
A. voice service voip secondary dialtone 0
B. call-manager-fallback secondary dialtone 0
C. dial-peer voice 1 pots secondary dialtone 0
D. ccm-manager secondary dialtone 0
Answer: B
New Questions 9
On which two call logs is the media encryption enforced in a Collaboration Edge design? (Choose two)
A. Expressway-C to internal endpoint
B. Expressway-E to outside-located endpoint
C. Expressway-C to Expressway-E
D. Expressway-E to Cisco Unified Communications Manager
E. Expressway-C to Cisco Unified Communications Manager
Answer: B,C
New Questions 10
Which statement about configuring the Cisco VCS Control and Cisco VCS Expressway is true?
A. You do not need to configure search rules for traversal calls.
B. You need to configure the firewall to allow communication from the Cisco VCS Expressway to the Cisco VCS Control.
C. The username on the Cisco VCS Control and Cisco VCS Expressway are local and do not need to match.
D. The Cisco VCS Expressway is the Traversal Server.
Answer: D
Topic 3, Exam Pool C
131.Which three commands can be used to verify SRST fallback mode? (Choose three.)
A. show telephony-service all
B. show telephony-service ephone-dn
C. show telephony-service ephone
D. show telephony-service voice-port
E. show telephony-service tftp-bindings
New Questions 11
If you want to delete a SAF-enabled trunk from Cisco Unified Communications Manager Administration, what must you do first?
A. Disassociate the trunk from the CCD advertising service or CCD requesting service.
B. Delete the trunk from the CCD requesting service node.
C. Place the Cisco Unified Communications Manager node in standby mode.
D. Redirect CCD advertising and requesting services to another Cisco Unified Communications Manager.
Answer: A
Recommend!! Get the 100% Guarantee 300-075 dumps in VCE and PDF From Examcollection, Welcome to download: http://www.examcollectionuk.com/300-075-vce-download.html (New 420 Q&As Version)