P.S. Top Quality 300-075 keys are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bM34MPZHJhwuG5bvDsAvoAwjKkgB_mmF
New Cisco 300-075 Exam Dumps Collection (Question 16 - Question 22)
Question No: 16
Which command is needed to utilize local dial peers on an MGCP-controlled ISR during an SRST failover?
A. ccm-manager fallback-mgcp
B. telephony-service
C. dialplan-pattern
D. isdn overlap-receiving
E. voice-translation-rule
Answer: A
Question No: 17
Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?
A. Configure the branch office IP phones with CSS and partitions.
B. Configure the branch office IP phones with MRGs and MRGLs.
C. Configure the branch office IP phones with regions.
D. Configure the branch office IP phones with locations.
Answer: B
Question No: 18
Refer to the following exhibit.
The MGCP gateway has the following configurations:
called party transformation CSS HQ_cld_pty CSS (partition=HQ cld_pty.Pt) call.ng party transformation CSS HQ_clng_pty CSS (partition=HQ_clng_pty Pt)
All translation patterns have the check box "Use Calling Party's External Phone Number Mask" enabled.
When the IP phone at extension 3001 places a call to 9011 49403021 56001# what is the resulting called and calling number that is sent to the PSTN?
A. The called number is 01 1 49403021 56001. The calling number will be 5553001 and number type set to subscriber.
B. The called number is 011 49403021 56001. The calling number will be 5215553001 and number type set to national.
C. The called number is 4940302156001 with number type set to international. The calling number will be 5215553001 and number type set to national.
D. The called number is +49403021 56001 with number type set to international. The calling number will be 5215553001 and number type set to subscriber.
Answer: A
Explanation: Incorrect: BCD
Check the check box "Use Calling Party's External Phone Number Mask" if you want the full, external phone number to be used for calling line identification (CLID) on outgoing
calls. You may also configure an External Phone Number Mask on all phone devices. Link:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805 b6f33.shtml
Question No: 19
The relationship between a Region and a Location is that the Region codec parameter is used between a Region and its configured Locations.
A. TRUE
B. FALSE
Answer: B
Explanation: Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html
#wp1033331
Question No: 20
Which two locations are the best locations that an end user can use to determine if an IP phone is working in SRST mode? (Choose two.)
A. Cisco Unified Communications Manager Administration
B. IP phone display
C. Cisco Unified SRST Router
D. Cisco Unified MGCP Fallback Router
E. physical IP phone settings
Answer: B,E
Explanation: Incorrect: ACD
IP Phone display and Physical phone IP settings are two locations were an end user can determine if an IP phone is working in SRST mode.
Link: http://my.safaribooksonline.com/book/telephony/1587050757/survivable-remote-site-telephony-srst/529
Question No: 21
Refer to the exhibit. You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly?
A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command.
B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command.
C. The sccp ccm group number needs to match the associate ccm 2 command.
D. The maximum sessions command must match the number of codecs configured under the dsp farm profile.
E. The sccp ccm group number must match the voice-card number.
Answer: B
Explanation: Incorrect: ACDE
The value of the IP address should match the IP address in the ip source-address command
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevtr ns.html
Question No: 22
Which two statements about remote survivability are true? (Choose two.)
A. SRST supports more Cisco IP Phones than Cisco Unified Communications Manager Express in SRST mode.
B. Cisco Unified Communications Manager Express in SRST mode supports more Cisco IP Phones than SRST.
C. MGCP fallback is required for ISDN call preservation.
D. MGCP fallback functions with SRST.
Answer: A,D
P.S. Easily pass 300-075 Exam with Examcollection Top Quality Dumps & pdf vce, Try Free: http://www.examcollectionuk.com/300-075-vce-download.html (420 New Questions)