300-075 Exam - CIPTV2 Implementing Cisco IP Telephony and Video, Part 2

certleader.com

P.S. Accurate 300-075 dump are available on Google Drive, GET MORE: https://drive.google.com/open?id=1ZCQ4EawGfv2jUchm2y0Bw27VBlFAVB_S


New Cisco 300-075 Exam Dumps Collection (Question 14 - Question 23)

Q1. Which three configuration settings are included in a default region configuration? (Choose three.)

A. Immersive Bandwidth

B. Video Call Bandwidth

C. Audio Codec

D. Link Loss Type

E. Real Time Protocol

F. Location Description

Answer: B,C,D

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/bccm-801cm/b02regio.html#wp1077135


Q2. Scenario:

There are two call control systems in this item.

The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone.

The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

DP:

Locations:

CSS:

Movie Failure:

Movie Settings:

CIPTV2 Topology:

Subzone:

Links:

Pipe:

Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can't make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?

A. Wrong username and/or password.

B. Wrong SIP domain name.

C. The TMSPE is not working.

D. The bandwidth is incorrectly configured.

Answer: D


Q3. Which statement about the function of the "+" symbol in the E.164 format is true?

A. The "+" symbol represents the international country code.

B. The "+" symbol represents the international call prefix.

C. The "+" symbol matches the preceding element one or more times.

D. The "+" symbol matches the preceding element zero or one time.

Answer: B


Q4. Which code snippet is required for SAF to be initialized?

A. Service Family

B. External-Client

C. router eigrp

D. topology base

Answer: C


Q5. When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration?

A. Configure the publisher node only in the SAF Forwarder configuration page.

B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.

C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.

D. Configure the SAF Security Profile Configuration to support only a single node.

Answer: B


Q6. Scenario:

There are two call control systems in this item.

The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.

The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

SX20 System information:

DX650 Configuration:

MRGL:

DP:

Locations:

AARG:

CSS:

Movi Failure:

Movie Settings:

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two)

A. Incorrect username and password.

B. Wrong SIP domain configured.

C. User is not associated with the device.

D. IP or DNS name resolution issue.

E. CSF Device is not registered.

F. IP Phone DN not associated with the user.

Answer: B,D


Q7. When you connect a Cisco VCS Control to Cisco Unified Communications Manager by using a SIP trunk, which mechanism do you use to verify that the trunk has an active connection?

A. OPTIONS ping

B. DNS tracing

C. Continuous ping

D. Dynamic DNS

Answer: A


Q8. An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS What should be configured within the local CUCM cluster to accomplish this?

A. Create a block transformation pattern.

B. Create a block route pattern.

C. Create a block translation pattern.

D. Create a block learned pattern.

Answer: C


Q9. Your companyu2021s main number is 408-526-7209, and your employeeu2021s directory numbers are 4-digit numbers. Which option should be configured if you want outgoing calls from 4- digit internal directory number to be presented as a 10-digit number?

A. calling party transformation pattern

B. AAR group

C. translation pattern

D. route pattern

Answer: A


Q10. An engineer is configuring a new DX-80 in Cisco Unified Communications Manager. Where can an engineer verify the default DSCP value of AF41?

A. enterprise phone configuration

B. common phone profile

C. service parameters

D. enterprise parameters

Answer: C


100% Renew Cisco 300-075 Questions & Answers shared by Thedumpscentre, Get HERE: http://www.thedumpscentre.com/300-075-dumps/ (New 245 Q&As)