300-075 Exam - Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)

certleader.com

Q1. Video calls using 384 kbps need to be supported across a gatekeeper-controlled trunk. What value should be entered into the gatekeeper to support this bandwidth? 

A. 768 kbps 

B. 384 kbps 

C. 512 kbps 

D. 192 kbps 

Answer:

Explanation: 

Incorrect Answer: A, C, D A 384-kb/s video call may comprise G.711 at 64 kb/s (for audio) plus 320 kb/s (for video). This sum does not include overhead. If the audio codec for a video call is G.729 (at 24 kb/s), the video rate increases to maintain a total bandwidth of 384 kb/s. Link: 

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08video.html#wp1059726 

Q2. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs? 

A. Media Resource Group List 

B. Device Pool 

C. Location 

D. AAR Group 

E. Calling Search Space 

Answer:

Explanation: 

A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call. 

Q3. Which action configures CAC utilizing only Cisco Unified Communications Manager software? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure Cisco Unified Communications Manager locations. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager MTPs. 

Answer:

Q4. When an incoming PSTN call arrives at an H.323 gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager? 

A. Normalization is done by configuring the significant digits for inbound calls on the H.323 gateway configuration in Cisco Unified Communications Manager. 

B. Normalization is done using route patterns. 

C. Normalization is done using the gateway incoming calling party prefixes based on number type. 

D. Normalization is achieved by local route group that is assigned to the H.323 gateway. 

Answer:

Q5. Which option describes the reason that transcoding resources are added in Cisco Unified Communications Manager? 

A. to enable transcoding resources in a Cisco Unified Communications Manager server 

B. to enable Cisco Unified Communications Manager to select the optimal single codec for end-to-end calls 

C. to enable transcoding resources in Cisco IP Phones 

D. to provide transcoding resources in Cisco IOS gateways to Cisco Unified Communications Manager 

Answer:

Q6. Which statement about the host portion format in Cisco Unified Communications Manager URI dialing is false? 

A. The host portion cannot start or end with a hyphen. 

B. The host portion is not case sensitive. 

C. The host portion accepts characters a-z, A-Z, 0-9, hyphens, and periods. 

D. The host portion can have two periods in a row. 

Answer:

Q7. Which Cisco IOS command is used to verify that a SAF Forwarder that is registered with Cisco Unified Communications Manager has established neighbor relations with an adjacent SAF Forwarder? 

A. show eigrp service-family ipv4 neighbors 

B. show eigrp address-family ipv4 neighbors 

C. show voice saf dndball 

D. show saf neighbors 

E. show ip saf neighbors 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E 

Router# show eigrp service-family ipv4 4453 neighbors 

Link: http://www.cisco.com/en/US/docs/ios/saf/command/reference/saf_s1.html 

Q8. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two.) 

A. Media Resource Group List. 

B. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS. 

C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS. 

D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM. 

E. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM. 

Answer: B,D 

Q9. Which three configuration settings are included in a default region configuration? (Choose three.) 

A. Audio Codec 

B. Video Call Bandwidth 

C. Link Loss Type 

D. Location Description 

E. Immersive Bandwidth 

F. Real Time Protocol 

Answer: A,B,C 

Q10. Refer to the exhibit. 

Which statement about the configuration between the Default and BR regions is true? 

A. Calls between the two regions can use either 64 kbps or 8 kbps. 

B. Calls between the two regions can use only the G.729 codec. 

C. Only 64 kbps will be used between the two regions because the link is "lossy". 

D. Both codecs can be used depending on the loss statistics of the link. When lossy conditions are high, the G.711 codec will be used. 

Answer: