300-075 Exam - Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)

certleader.com

Q1. Refer to the exhibit. 

Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site? 

A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number. 

B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number. 

C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

Answer:

Q2. Which device must be accessible from the public Internet in a Collaboration Edge environment? 

A. Expressway-C 

B. Cisco Unified Communications Manager 

C. Cisco IM and P 

D. Expressway-E 

E. VCS Control 

Answer:

Q3. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

Answer: B,D 

Q4. What is the fastest way for an engineer to test the implementation of SRST in a production environment? 

A. Shut down the Cisco Unified Communications Manager Servers. 

B. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers. 

C. Add a null route to the publisher Cisco Unified Communications Manager at the remote router. Remove the null route when the operation is verified. 

D. Unplug the IP phones from their switch ports. 

E. Verification is not needed. 

Answer:

Q5. What user profile is used to define the settings for a user on login? 

A. Device Profile 

B. Group Profile 

C. Pool Profile 

D. Specific Profile 

Answer:

Q6. Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all Cisco Unified Communications Manager systems? 

(Choose two.) 

A. SCCP fallback 

B. Cisco Unified Survivable Remote Site Telephony 

C. Cisco Unified Communications Manager Express 

D. MGCP fallback 

E. Cisco Unified Communications Manager Express in SRST mode 

Answer: B,E 

Q7. Refer to the exhibit. 

The HQ Cisco Unified Communications Manager has been configured for end-to-end 

RSVP. The BR Cisco Unified Communications Manager has been configured for local 

RSVP. 

RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP. When a call is placed from the IP phone at HQ to the BR phone at the BR site, which statement is true? 

A. The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call. No RSVP end-to-end will occur. 

B. RSVP end-to-end will occur. 

C. The Cisco Unified Communications Manager at HQ will use end-to-end RSVP. The BR Cisco Unified Communications Manager will use local RSVP. 

D. The call will fail. 

E. The call will proceed as a normal call with no RSVP reservation. 

Answer:

Explanation: 

Incorrect Answer: A, B, C A possible cause is that the same router is being used as the calling and called RSVP agents, and that router is not running the latest IOS version, which supports loopback on RSVP reservation. Make sure that the router is running the latest IOS version. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.html #wp1155102 

Q8. While configuring Call Survivability in Cisco Unified Communications Manager, what step is mandatory to reach remote sites while in SRST mode? 

A. Enable Cisco Remote Site Reachability. 

B. Configure CFUR. 

C. Enable the SRST checkbox in the MGCP gateway. 

D. Configure the H.323 gateway for SRST in Cisco Unified Communications Manager. 

E. Enable the Failover Service parameter. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Call Forward Unregistered (CFUR) functionality provides the automated rerouting of calls through the PSTN when an endpoint is considered unregistered due to a remote WAN link failure Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/models.html 

Q9. How many active gatekeepers can you define in a local zone? 

A. 1 

B. 2 

C. 5 

D. 10 

E. 15 

F. unlimited 

Answer:

Q10. Refer to the exhibit. 

Which CSS is used at the HQ Cisco Unified Communications Manager to reroute calls via the PSTN when the SAF network is unavailable? 

A. the phone device CSS 

B. the phone line CSS 

C. the phone line/device combined CSS 

D. the SAF CSS configured on the CCD requesting service 

E. the phone AAR CSS configured at the phone device 

F. No special CSS is required. If SAF patterns are accessible, the PSTN reroute is automatic. 

Answer: