300-175 Exam - DCUCI Implementing Cisco Data Center Unified Computing (DCUCI)

NEW QUESTION 1
Drag and drop the scripting tools on the left to the correct definitions on the right.

Answer:

Explanation: Cisco UCS Python SDK
(provides complete suppport for cisco ucs manager XML PAI calls,is installed as a Vm,and can be used to import and replicate existing cisco ucs manager and physical inventory )
Cisco UCS Platform Emulator
(is a module for widely used,general-purpose,high-level programming language that helps automate and manage configuration within cisco ucs manager ,including service profiles,policies ,pools,equipment,am=nd network and storage management)
Cisco UCS Automation Tool
(converts Cisco UCS Manager actions into automation scripts and captures Cisco UCS Manager actions in XML to use in any programming language that has variables )
Cisco UCS PowerTool Suite
(is a set of Powershell modules for cisco ucsmanager,cisco IMC and cisco ucs Central that aids in configuration and management of cisco ucs domains and solutions )

NEW QUESTION 2
You configure FCoE in a Cisco UCS system at a customer site. The configuration seems correct, but the customer complains that the system fails to perform as expected. FCoE VLAN discovery, FCF discovery and FLOGI processes work properly. The issue appears to be with the Fibre Channel commands and responses.
What is a possible cause of the issue?

• A. The storage device is experiencing configuration or compatibility issues when the FIP process completes successfully.
• B. The routed Layer 3 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.
• C. The FCoE configuration is experiencing errors because of issues with the Fibre Channel commends.
• D. The switched Layer 2 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.

Answer: B

Explanation: Make sure that your native vlan is carried across all the trunk ports.
Reference:
https://supportforums.cisco.com/t5/storage-networking/fip-and-native-vlan/td-p/2451783

NEW QUESTION 3
Which option describes the difference between "high-performance" and "none" on a VM-FEX port profile?

• A. None is software assisted, and high-performance is software and hardware assisted.
• B. None indicates that VM-FEX is not used on this interface, and high-performance indicates that is used.
• C. None is used for management profiles, and high-performance is used for mission-critical data profiles.
• D. None assumes default scheduling settings for the port profile, and high-performance gives the ports priority in scheduling.

Answer: A

NEW QUESTION 4
Which option describes the Network Security feature of Cisco intergrated Management Controller?

• A. User-configured ACLs that deny devices access to the Cisco IMC.
• B. 802.1x support which permits the Cisco IMC access to the port security network.
• C. A feature that locks users out of the Cisco IMC after a specified number of unsuccessful log in attempts.
• D. A list that specifies the devices allowed to access the Cisco IMC.

Answer: C

NEW QUESTION 5
Which two statements about the service profile configuration options in the Cisco UCS Manager GUI are true? (Choose two.)

• A. It can be generated automatically from the service profile template.
• B. It can be derived from the chassis discovery policy.
• C. It can be derived from the initial template or the updating template.
• D. It can be configured by cloning a virtual machine profile.
• E. It can be configured by using the chassis connectivity policy.

Answer: AC

Explanation: Reference: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration

NEW QUESTION 6
Which two parameters must be configured on a standalone Cisco UCS C-Series Server to export the technical support data to a remote server? (Choose two)

• A. Specify a remote TFTP server IP address.
• B. Install a certificate
• C. Install an FTP server
• D. Set the source as the UCS server IP address.
• E. Specify the remote relative path and file name.

Answer: AE

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/2-0/b_Cisco_UCS_Cseries

NEW QUESTION 7
Which two are true with respect to the upgrade process for the Cisco Unified Computing System? (Choose two.)

• A. For easier manageability, Cisco provides one full bundle that contains the firmware images for all Cisco Unified Computing System components.
• B. You can choose from FTP, TFTP, SCP, and HTTP to copy the bundle image from a remote file system.
• C. When the bundle image is downloaded, it must be transferred to the flash file system of the active fabric interconnect.
• D. When the download is successful, Cisco Unified Computing System Manager expands the individual files from the archive and installs them in the correct flash file system partition.
• E. It is strongly recommended that you activate all components in all chassis at one time.
• F. The I/O module, CIMC, and adaptors update process operates strictly on the backup partition of Flash for a given component.

Answer: CF

NEW QUESTION 8
You need to upgrade the firmware on a Cisco UCS B-Series Blade Server system. Drag and drop the firmware packages on the left to the appropriate software bundle types on the right.

Answer:

Explanation: Cisco UCS Infrastructure Software Bundle
I/O module firmware
Kernel and system firmware for Fabric Interconnects
Cisco UCS Manager firmware
Cisco UCS B-series Blade Server Software Bundle
Board controller firmware
BIOS firmware CIMC firmware Third-party firmware

NEW QUESTION 9
What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect?

• A. By default, uplink Fibre Channel interfaces are configured for VSAN trunking.
• B. Using NPV, each downstream server will be pinned to an uplink port that is based on a PIN group.
• C. TheFibre Channel pinning process is implemented differently than end-host MAC address pinning.
• D. With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN.

Answer: D

NEW QUESTION 10
ACisco UCS Administrator is planning to complete a firmware upgrade using Auto install. Which two options are prerequisites to run Auto install? (Choose two.)

• A. minor fault fixing
• B. configuration backup
• C. service profiles unmounted from the blade servers
• D. time synchronization
• E. fault suppression started on the blade servers

Answer: AB

NEW QUESTION 11
An engineer is performing firmware upgrades through Cisco USC Manager.
Which firmware upgrade causes the server to be powered off during the upgrade and powered on after the upgrade is complete?

• A. adapter
• B. board controller
• C. BIOS
• D. storage controller

Answer: C

NEW QUESTION 12
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager. Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.



Refer to the Exhibit 2 screenshot of the NX-OS shell CLI in UCS Manager. What LAN policy correlates with the line “pinning server pinning-failure link-down”?

• A. Dynamic vNIC Connection
• B. Link Protocol
• C. Flow Control
• D. Network Control

Answer: D

Explanation: Reference:
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-seriesblade-server-chassis/1160
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configur

NEW QUESTION 13
Refer to the exhibit.

From the Cisco Integrated Management Controller GUI, the Cisco Network Assistant VIC adapter properties of a Cisco UCS -Series Server in standalone mode are configured as shown. Which three options are results of the configuration? (Choose three.)

• A. Sixteen dynamic vNICs on the Cisco Network Assistant VIC adapter are provisioned.
• B. A description for the Cisco Network Assistant VIC adapter is assigned.
• C. Sixteen static vNICs on the Cisco Network Assistant VIC adapter are provisioned.
• D. FIP support on the Cisco Network Assistant VIC adapter is enabled.
• E. Sixteen dynamic device aliases for vNICs on the Cisco Network Assistant VIC adapter are provisioned.
• F. NIV mode for the Cisco Network Assistant VIC adapter is disabled.

Answer: ABD

Explanation: Reference:
http://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-seriesswitches/117690-configure-vmfex-00.ht

NEW QUESTION 14
Which item represents a secure method of transmitting fault data with Cisco Call Home?

• A. Cisco Transport Gateway
• B. RSADigital Certificate
• C. IPsec
• D. secure XML

Answer: A

NEW QUESTION 15
Refer to the exhibit.

Which port is used for communication between the server and the Cisco Integrated management Controller?

• A. port on the adapter card
• B. management Ethernet port
• C. LAN on the motherboard port
• D. fabric uplink port

Answer: B

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-2-1/b_Cisco_UCS_C-Se

NEW QUESTION 16
Which three components perform the port extension functions for a Cisco UCS domain? (Choose three.)

• A. the multiprotocol port on the Cisco storage
• B. the Device Manager in Cisco Prime Data Center Network Manager
• C. the Cisco UCS 2208XP IOMs
• D. the Cisco UCS Manager
• E. the Cisco Nexus 2232PP FEX
• F. the Cisco UCS VIC adapter that has VM-FEX and Adapter FEX technology

Answer: ACD

NEW QUESTION 17

Answer:

Explanation:

NEW QUESTION 18
Which two statements about Call Home are true? (Choose two.)

• A. The virtual IP address of the Cisco UCS Manager in a cluster is the source of the email.
• B. In a cluster configuration, at least one fabric interconnect must have IP connectivity.
• C. The fabric interconnect must have IP connectivity to email server or the destination HTTP server
• D. At least one destination profile must be configured.
• E. Call Home requires SCP to transfer the files securely.

Answer: CD

NEW QUESTION 19
Which of the following is true concerning Fibre Channel communications on a Cisco Unified Computing System?

• A. Each VSAN requires a dedicated VLAN to carry FCoE traffic.
• B. FCoE VLANs are created like Ethernet VLANs on Cisco Unified Computing System Manager.
• C. FCoE VLANs may overlap with Ethernet VLANs.
• D. Cisco Unified Computing System Manager supports a maximum of 128 active VSANs.

Answer: A