Proper study guides for Refresh Cisco Designing Cisco Data Center Infrastructure (DCID) certified begins with Cisco 300-610 preparation products which designed to deliver the Approved 300-610 questions by making you pass the 300-610 test at your first time. Try the free 300-610 demo right now.
Free 300-610 Demo Online For Cisco Certifitcation:
NEW QUESTION 1
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
- A. IP redirects
- B. flow control
- C. proxy ARP
- D. HSRP
Answer: C
NEW QUESTION 2
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. network speed
- B. GPU support
- C. storage capacity
- D. processor count
Answer: C
NEW QUESTION 3
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. FCoE protocol
- B. type of storage
- C. end-to-end oversubscription ratio
- D. N Port virtualization
Answer: C
NEW QUESTION 4
What is a design consideration when implementing FSPF?
- A. Routes are based on the domain ID.
- B. Routes are based on the distance vector protocol.
- C. FSPF runs only on F Ports.
- D. FSPF runs on a per-chassis basis.
Answer: A
NEW QUESTION 5
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Cisco UCS Manager creates two separate fabric port channels.
- B. Cisco UCS Manager creates a single fabric port channel.
- C. The port channel is disabled until an administrator enables it manually.
- D. Each uplink that connects an IOM is configured as a discrete link.
Answer: A
NEW QUESTION 6
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 7
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- B. on the host, by using multipathing software
- C. in the hardware on the Cisco UCS VIC 12xx adapter or later
- D. in the hardware on any Cisco UCS VIC adapter
Answer: B
NEW QUESTION 8
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Secondary
- B. Initial
- C. Updating
- D. Primary
Answer: B
NEW QUESTION 9
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. vPC
- B. virtual interface
- C. port channel
- D. physical port
Answer: B
NEW QUESTION 10
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 11
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?
- A. NX-API
- B. Postman
- C. Bash shell
- D. Guest shell
Answer: A
NEW QUESTION 12
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
- A. reduction in application performance
- B. distance limitations
- C. specific backup requirements
- D. potential data loss
Answer: D
NEW QUESTION 13
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Virtual Topology System
- B. Cisco Data Center Network Manager
- C. Cisco Nexus Fabric Manager
- D. Cisco CloudCenter
Answer: B
NEW QUESTION 14
Which two features are provided by deploying an OOB management network in a Cisco Nexus data center? (Choose two.)
- A. Layer 3 path for monitoring purposes
- B. Layer 2 path for server traffic
- C. Layer 2 path for a vPC peer link
- D. Layer 3 path for vPC keepalive packets
- E. Layer 3 path for server traffic
Answer: BC
NEW QUESTION 15
Which orchestration tool should be used for the management and analytics of servers across multiple sites?
- A. Cisco Intersight
- B. Cisco Nexus Fabric Manager
- C. Cisco UCS Manager
- D. Cisco Data Center Network Manager
Answer: A
NEW QUESTION 16
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
- A. HA
- B. VSS
- C. FT
- D. VDP
- E. DRS
Answer: AE
NEW QUESTION 17
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
- B. Use the port-monitor command to detect slow drain devices.
- C. Configure the port channel to enable individual buffer-to-buffer credits.
- D. Configure the port monitor to allow categorization of a specific device as slow.
- E. Configure the flow control for the FC to use R_RDY.
Answer: BD
NEW QUESTION 18
What is an advantage of using OTV as compared to VPLS for data center redundancy?
- A. prevents loops on point-to-point links
- B. provides head-end replication
- C. uses a proactive MAC advertisement
- D. provides full-mesh connectivity
Answer: A
NEW QUESTION 19
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
- A. Embedded RP
- B. Phantom RP
- C. MSDP
- D. PIM anycast RP
Answer: D
NEW QUESTION 20
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
- A. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
- B. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
- C. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
- D. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
Answer: B
NEW QUESTION 21
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 22
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. NPV feature on the Cisco MDS Series.
- C. end-host mode feature on the Cisco UCS Fabric Interconnects
- D. NPIV feature on the Cisco MDS Series
- E. Smart Zoning feature on the Cisco UCS Fabric Interconnects
Answer: BD
NEW QUESTION 23
Drag the requirements from the left onto the correct policy types on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 24
Which technology enables Layer 2 extension between remote data center sites?
- A. FCIP
- B. GRE
- C. DMVPN
- D. OTV
Answer: D
NEW QUESTION 25
......
100% Valid and Newest Version 300-610 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/300-610-exam-dumps.html (New 60 Q&As)