Q1. Router A and router B are Cisco IOS routers with hardware CFB resources that are registered to the same Cisco Unified Communications Manager server. Which Media Resource Group and Media Resource Group List configuration should be implemented if an administrator wants to make sure that all provisioned DSPs on router A are consumed before router B's DSP is used?
A. Router A's CFB and router B's CFB should each be configured in its own MRG. Both MRGs should then be grouped into the same MRGL, but the MRG that contains router A's CFB should be listed in higher order than the MRG that contains router B's CFB. Finally, associate the MRGL to all conference resource consumers.
B. Router A's CFB and router B's CFB should each be configured in its own MRG. Both MRGs should then be further separated into different MRGLs. Finally, associate the MRGL that contains router A's CFB in higher order than router B's CFB to all conference resource consumers.
C. Router A's CFB and router B's CFB should both be configured in the same MRG with router A's CFB listed higher than that of router B. Then associate the MRG with an MRGL and apply it to all conference resource consumers.
D. Router A's CFB and router B's CFB should both be configured in the same MRG. Make sure router A's CFB is listed in a higher alphabetical order than router B's CFB. Then associate the MRG with an MRGL and apply it to all conference resource consumers.
E. Router A's CFB and router B's CFB should both be configured in the same MRG. Use Cisco Unified Communications Manager service parameters to assign a higher priority to router A's CFB. Then associate the MRG with an MRGL and apply it to all conference resource consumers.
Answer: A
Q2. Which type of mailbox on Cisco Unity Express can play a user greeting and disconnect the call, but cannot take or send messages?
A. PIN-less mailbox
B. announcement-only mailbox
C. general delivery mailbox
D. call-handling mailbox
E. personal mailbox
Answer: B
Q3. Refer to the exhibit.
A user is going through a series of dialing steps on a SIP Type B IP phone to call a SCCP IP phone. Both phones are registered to the same Cisco Unified Communications Manager cluster. Assume that the calling SIP phone is associated with a SIP dial rule with a pattern value of "2001".
Which statement about how digits are forwarded to the Cisco Unified Communications Manager for further call processing is true?
A. As each digit is pressed on the SIP IP phone, it is sent to the Cisco Unified Communications Manager in a SIP NOTIFY message as a KPML event.
B. The SIP IP phone waits for the inter-digit timer expiry and then sends each digit to the Cisco Unified Communications Manager as a separate KPML event in a SIP NOTIFY message.
C. As soon as the user selects the Dial soft key, the SIP IP phone forwards all digits to the Cisco Unified Communications Manager in a SIP INVITE message.
D. As soon as the Dial soft key is selected, the SIP IP phone forwards the first digit in a SIP INVITE and the subsequent digits in SIP INFORMATION messages.
E. The SIP IP phone waits for the inter-digit timer expiry, and then sends all digits to the Cisco Unified Communications Manager in a SIP INVITE message.
Answer: C
Q4. Which protocol does the Cisco Jabber client use, in conjunction with Cisco IM and Presence, to deliver enterprise-class instant messaging services?
A. SIP
B. CTI/QBE
C. XMPP
D. IRC
E. ICQ
Answer: C
Q5. Which two types of devices on Cisco Unified Communications Manager support iSAC? (Choose two.)
A. MGCP
B. SIP
C. SCCP
D. Music on Hold server
E. H.323
Answer: BC
Q6. To which SIP response class do the SIP response codes 300 to 399 belong?
A. Provisional
B. Client Failure
C. Server Failure
D. Successful
E. Redirection
Answer: E
Q7. Which two analog telephony signaling methods are most vulnerable to glare conditions? (Choose two.)
A. FXS Loop-start
B. FXO Ground-start
C. E&M Wink-start
D. E&M Delay-dial
E. E&M Immediate-start
F. E&M Feature Group D
Answer: AE
Q8. Which system location is used for intercluster Enhanced Location CAC on Cisco Unified Communications Manager?
A. Hub_None
B. Default
C. Intercluster
D. Phantom
E. Shadow
Answer: E
Q9. Refer to the exhibit.
How many SIP signaling transaction(s) took place in this SIP message exchange between two SIP user agents?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
Answer: C
Q10. Refer to the exhibit.
A user is going through a series of dialing steps on an SCCP IP phone (extension 1001) to call another SCCP IP phone (extension 2003). Both phones are registered to the same Cisco Unified Communications Manager cluster. Which user inputs are sent from the calling IP phone to the Cisco Unified Communications Manager, in forms of SCCP messages, after the user pressed the Dial softkey? Note that the commas in answer choices below are logical separators, not part of the actual user input or SCCP messages.
A. A separate SCCP message is sent to Cisco Unified Communications Manager for each of the following user inputs: 2, 0, 0, 3.
B. A separate SCCP message is sent to Cisco Unified Communications Manager for each of the following user inputs: 2, 0, 1, <<, 0, 3.
C. A single SCCP message is sent to Cisco Unified Communications Manager to report that digits 2003 have been dialed.
D. A single SCCP message is sent to Cisco Unified Communications Manager to report that digits 201<<03 have been dialed.
E. A separate SCCP message is sent to Cisco Unified Communications Manager for each of the following user inputs: 2, 0, 1, <<, 2, 0, 0, 3.
Answer: C