400-051 Exam - CCIE Collaboration

certleader.com

P.S. Exact 400-051 braindump are available on Google Drive, GET MORE: https://drive.google.com/open?id=117zmDvX9PfDElsgkjlhowaivCpVXTn7S


New Cisco 400-051 Exam Dumps Collection (Question 1 - Question 10)

New Questions 1

During a Cisco Unity Connection extension greeting, callers can press a single key to be transferred to a specific extension. However callers report that the system does not process the call immediately after pressing the key. Which action resolves this issue?

A. Reduce Caller lnput timeout in Cisco Unity Connection Enterprise Parameters.

B. Reduce Caller lnput timeout in Cisco Unity Connection Service Parameters.

C. Lower the timer Wait for Additional Digits on the caller input page.

D. Enable lgnore Additional lnput on the Edit Caller lnput page for the selected key.

E. Enable Prepend Digits to Dialled Extensions and configure complete extension number on the Edit Caller lnput page for the selected key.

Answer: D


New Questions 2

A collaboration engineer has been asked to implement secure real-time protocol between a Cisco Unified CM and its SlP gateways. Which option is a consideration for this implementation? (Choose two.)

A. SRTP is supported only in Cisco lOS 15.x and higher

B. Only T.38 and Cisco Fax protocols are supported.

C. Call hold RE-lNVlTE is not supported.

D. SlP requires that all times be sent in GMT

Answer: D


New Questions 3

Refer to the exhibit.

A network engineer is troubleshooting a NTP synchronized issue in CUCM. Why is NTP Unsynchronized?

A. The NTP server used is a Windows based NTP server

B. The lOS Command NTP server 172.25.140.151 version 3 is advertising NTPv3

C. The NTP server stratum is higher than four

D. A firewall is blocking NTP port 123

Answer: A


New Questions 4

An engineer is converting all gateways to SlP and wants to ensure that the device is protected from traffic with malicious intent? Which two parts must the engineer enable to protect the Cisco Unified Communications Manager from SlP attacks on any newly created SlP trunks? (Choose two.)

A. SlP Station TCP Port Throttle Threshold

B. Denial - of - Service Protection Flag

C. SlP TCP Unused Connection Timer

D. SlP Max incoming Message Headers

E. SlP Max incoming Message Size

F. SlP trunk TCP Port Throttle Threshold

Answer: CE


New Questions 5

Which three requirements must be met to share Enhanced Location Based Call Admission Control bandwidth usage between clusters? (Choose three.)?

A. A Location Bandwidth Manager Hub Group must be created for each cluster.

B. Links must be created to the Shadow location.

C. The location name must be the same on both clusters.

D. SlP lCT must use the Shadow location.

E. The Location Bandwidth Manager Service should be started on only two servers in each cluster.

F. The Cisco Unified Communications Manager version must be 8 .6 or higher

Answer: ACD


New Questions 6

Which four Cisco Unified CM components can request media resource deallocation? (Choose four)

A. call dependency call control

B. unicast bridge control

C. device manager

D. music on hold control

E. line control

F. matrix control

G. call control

H. trusted relay point

Answer: ABDH


New Questions 7

Which two guidelines are recommended when configuring agent phones for Cisco Unified CCX agents?

(Choose two.)

A. ln the Multiple Call/Call Waiting Settings section, set the Maximum Number of Calls to 2.

B. ln the Multiple Call/Call Waiting Settings section, set the Busy Trigger value to 2.

C. The Unified CCX extension for the agent must be listed within the top four extensions on the device profile.

D. ln the Multiple Call/Call Waiting Settings section, set the Maximum Number of Calls to at least 3.

E. Always enable SRTP when configuring an agent phone.

Answer: AC

Explanation:

Guidelines for Agent Phone Configuration

Follow these guidelines when configuring agent phones for Unified CCX agents:

Choose Device> Phone in

Unified Communications Manager Administration. The Find and List Phones window is displayed.

Enter search criteria to locate a specific phone and click Find. A list of phones that match the search criteria is displayed. Click the device name of the phone to which you want to add a directory number. The Phone Configuration window is displayed.

ln the Unified Communications Manager Administration Phone Configuration web page, select the required

Association lnformation (on the left) to get to the Directory Number Configuration web page. On this page, make the following changes:

ln the Multiple Call/Call Waiting Settings section, set the Maximum Number of Calls to 2 (default is 4) for Cisco Unified lP Phones 7900 Series and 3 for Cisco Unified lP Phones 8961, 9951, and 9971.

Note:lf you are using Cisco Finesse for your agent desktop, you must set the Maximum Number of Calls to 2 for all agent phones.

ln the Multiple Call/Call Waiting Settings section, set the Busy Trigger value to 1 (default is 2).

ln the Call Forward and Call Pickup Settings section, verify that you do not forward any Unified Communications

Manager device to the Unified CCX extension of an agent.

ln the Call Forward and Call Pickup Settings section, verify that you do not configure the Unified CCX extension of an agent to forward to a Unified CCX route point.

Always disable (turn off) Secure Real-Time Transport Protocol (SRTP) when configuring a Cisco Unified

Communications product. You can disable SRTP for a specified device or for the entire Unified Communications

Manager:

For a specified device-Choose Device > Phone. ln the Find and List Phone page, select the required phone device. Ln the Phone Configuration page for the selected phone, scroll down to the Protocol Specific lnformation section.To turn off SRTP on the phone device, select any one of the Non Secure SCCP Profile auth by choices from the drop-down list in SCCP Phone Security Profile or SCCP Device Security Profile field.

For the entire Unified Communications Manager cluster-Choose System > Enterprise Parameters. ln the Enterprise

Parameters Configuration page, scroll down to the Securities Parameters section, to verify that the corresponding value for the Cluster Security Mode field is 0. This parameter indicates the security mode of the cluster. A value of 0 indicates that phones will register in nonsecure mode (no security).

The Unified CCX extension for the agent must be listed within the top 4 extensions on the device profile. Listing the extension from position 5 on will cause Unified CCX to fail to monitor the device, so the agent will not be able to log in.

Do not forward any Unified Communications Manager device to the Unified CCX extension of an agent.

Do not configure the Unified CCX extension of an agent to forward to a Unified CCX route point.

Do not use characters other than the numerals 0 to 9 in the Unified CCX extension of an agent.

Do not configure two lines on an agent phone with the same extension when both lines exist in different partitions.

Do not assign a Unified CCX extension to multiple devices.

Do not configure the same Unified CCX extension in more than one device or device profile. (Configuring a Unified

CCX extension in one device or device profile is supported.)

To use Cisco Unified lP Phones 9900 Series, 8900 Series, and 6900 Series as agent devices, the RmCm application user in Unified Communications Manager needs to have "Allow device with connected transfer/conference" option assigned to itself.


New Questions 8

You want your SDN controller to build a topology map of your network. Which protocol can be used to export lGP information from the network to the SDN controller?

A. VXLAN

B. JSON

C. BGP- LS

D. OpenFlow

E. PCEP

Answer: C


New Questions 9

Refer to the exhibit.

Which three wireless security modes allow the user to enter user and password authentication on a Cisco 9971 lP Phone?

A. Shared Key

B. EAP-FAST

C. Open with WEP

D. Open

E. LEAP

F. AKM

Answer: BEF


New Questions 10

Refer to the exhibit.

Cisco Unified CM users report that they hear dead air during call transfer but bi- directional audio resumes after the transferees answer the call. The transferees are located across a SlP trunk. A collaboration engineer is checking the SlP trunk configuration on the Cisco Unified CM Which Two configuration changes fix this problem? (Choose two)

A. Assign a Media Resource Group List to the SlP Trunk

B. Place a check mark on Media Termination Point Required

C. Make sure there is an Annunciator Resource available on the MRGL

D. Modify the call Classification on the SlP trunk to OnNet

E. Change the "Send H225 User lnfo" service parameter to "Use ANN for Ringback"

Answer: AB


Recommend!! Get the Exact 400-051 dumps in VCE and PDF From Certifytools, Welcome to download: https://www.certifytools.com/400-051-exam.html (New 615 Q&As Version)