Master the content and be ready for exam day success quickly with this . We guarantee it!We make it a reality and give you real in our Cisco 640-692 braindumps. Latest 100% VALID at below page. You can use our Cisco 640-692 braindumps and pass your exam.
Free 640-692 Demo Online For Microsoft Certifitcation:
NEW QUESTION 1
Which of the following CLI operating modes, by default, allow you to copy a Cisco IOS image to flash memory from TFTP server?
- A. User EXEC
- B. Privileged EXEC
- C. FTP
- D. Global configuration
Answer: B
NEW QUESTION 2
From a Windows command prompt, which command displays the local IP address of a computer?
- A. ip config
- B. ip configuration
- C. ipconfig
- D. ipconfiguration
Answer: C
NEW QUESTION 3
What are two possible causes if an Ethernet interface is up and the line protocol is down? (Choose two)
- A. The Ethernet cable might not be attached properly
- B. There is a speed or duplex mismatch with the remote device
- C. The Ethernet interface has been manually disabled
- D. There is a Layer 2 mismatch in the encapsulation type
- E. Keepalives are not being received by the local device
Answer: BD
NEW QUESTION 4
Which two pieces of information can be determined about a neighbor device from the CLI command show cdp neighbor? (Choose two)
- A. device ID
- B. IP address
- C. platform
- D. uptime
Answer: AC
NEW QUESTION 5
Which three pieces of information about a device can be seen from the show version command? (Choose three)
- A. CPU load
- B. Device model
- C. Installed DRAM
- D. Installed flash
- E. Locally configured IP addresses
Answer: BCD
NEW QUESTION 6
Which address facilitates the routing of packets over an IP network?
- A. MAC
- B. transport
- C. network
- D. physical
Answer: C
NEW QUESTION 7
While performing password recovery on a Cisco device, the configuration register should be which value in order to bypass loading the startup configuration?
- A. 0x2102
- B. 0x2112
- C. 0x2122
- D. 0x2142
Answer: D
NEW QUESTION 8
A null modem cable uses which adapter type?
- A. RJ-11
- B. RJ-45
- C. RS-323
- D. RS-232
- E. USB
Answer: B
NEW QUESTION 9
The pins and RJ-45 are numbered from 1 through 8. With the material points of the plug facing toward you, pin 1 is the leftmost pin. Which two sets are looped on an RJ-45 T1 loopback plug? (Choose two)
- A. Pins 1 and 4
- B. Pins 1 and 7
- C. Pins 2 and 5
- D. Pins 2 and 8
- E. Pins 1 and 5
- F. Pins 2 and 7
Answer: AC
NEW QUESTION 10
Which two locations can be configured as a source for the IOS image in the boot system command? (Choose two.)
- A. RAM
- B. NVRAM
- C. flash memory
- D. HTTP server
- E. TFTP server
- F. Telnet server
Answer: CE
NEW QUESTION 11
What are two ways to open a command prompt session on a Windows-based computer? (Choose two)
- A. Click Start > Control Panel > Command Prompt
- B. Click Start > All Programs > Accessories > Command Prompt
- C. Click Start > All Programs > Command Prompt
- D. Click Start > Ru
- E. Enter cmd and click OK
- F. Click Start > All Programs > Accessories > Communications > Command Prompt
Answer: BD
NEW QUESTION 12
Which command initiates the copy of an IOS image to a Cisco device?
- A. copy flash tftp
- B. copy tftp flash
- C. copy tftp ftp
- D. copy tftp nvram
- E. xmodem flash
Answer: B
NEW QUESTION 13
Which two of the following CLI operating modes, by default, allow you to copy a Cisco IOS image to flash memory from TFTP server? (Choose two)
- A. User EXEC
- B. Privileged EXEC
- C. ROMMON
- D. Global configuration
Answer: BC
NEW QUESTION 14
Which of the following command display the saved configuration file?
- A. show configuration
- B. show file system
- C. show running-config
- D. start config
Answer: A
NEW QUESTION 15
Which two of the following are installed fiber-optic connectors? (Choose two)
- A. subscriber
- B. crossover
- C. multi-dimension
- D. Lucent
Answer: AD
NEW QUESTION 16
Which of the following statements are true?
- A. OEM products that are built for Cisco never get a Cisco logo applied.
- B. The Cisco logo, old or new, can be found on the front bezel of all Cisco rack-mountable or desktop products.
- C. Serial numbers are attached by label on all Cisco field-replaceable parts.
- D. At the network level, the user serial number should be different as the part number.
Answer: B
NEW QUESTION 17
Refer to the exhibit.
Hosts in network 192.168.2.0 are unable to reach hosts in network 192.168.3.0. Based on the output from RouterA, what are two possible reasons for the failure? (Choose two.)
- A. The cable that is connected to S0/0 on RouterA is faulty.
- B. Interface S0/0 on RouterB is administratively down.
- C. Interface S0/0 on RouterA is configured with an incorrect subnet mask.
- D. The IP address that is configured on S0/0 of RouterB is not in the correct subnet.
- E. Interface S0/0 on RouterA is not receiving a clock signal from the CSU/DSU.
- F. The encapsulation that is configured on S0/0 of RouterB does not match the encapsulation that is configured on S0/0 of RouterA.
Answer: EF
Thanks for reading the newest 640-692 exam dumps! We recommend you to try the PREMIUM Certifytools 640-692 dumps in VCE and PDF here: https://www.certifytools.com/640-692-exam.html (92 Q&As Dumps)