Q1. HOTSPOT
You need to ensure that the help desk application can use EX4 as an SMTP relay to send email messages. The solution must ensure that the sender of the email messages is displayed as Help Desk.
What authentication and permission group should you configure for the Receive Connector? (To answer, configure the appropriate options in the answer area.)
Answer:
Topic 7, Mix Questions
56. Your company has a main office and three branch offices.
You have an Exchange Server 2013 organization. The main office contains five Exchange servers. Each branch office contains two Exchange servers. All of the servers have all of the Exchange server roles installed. Each branch office contains one database availability group (DAG).
You need to recommend a load balancing solution for the branch offices. The solution must ensure that both servers in each office are the targets of all client connections.
What are two possible recommendations? Each correct answer presents a complete solution.
A. DNS round robin
B. Layer 4 hardware load balancers
C. CAS arrays
D. Network Load Balancing (NLB) clusters
Q2. Fabrikam, Ltd. has an Exchange Server organization that contains two servers. The servers are configured as shown in the following table.
Recently, the internal and external namespaces named mail.fabrikam.com and autodiscover.fabrikam.com were changed to point to EX2.
You configure all of the users on EX2 to access their mailbox by using Microsoft Outlook from the Internet.
You enable Outlook Anywhere on EX1.
You need to ensure that users who have mailboxes on EX1 can connect to their mailbox from the Internet.
What should you do on EX1?
A. Set the ExternalHostName value to NULL.
B. Set the ExternalClientAuthenticationMethod value to Basic and NTLM.
C. Set the IISAuthenticationMethods value to Basic and NTLM.
D. Set the InternalHostName value to NULL
Answer: C
Q3. Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. You have an Exchange Server 2013 organization named Contoso.
You plan to create an additional SMTP domain named sales.contoso.com. You will use sales.contoso.com as the primary SMTP address for the users in the sales department.
You create a new email address policy and apply the policy to the sales users.
New sales users report that when they attempt to access their email from the Internet for the first time by using Microsoft Outlook 2010, they fail to connect. The sales users connect to their mailbox internally successfully by using Outlook 2010. All other users can connect to their mailbox from the Internet and internally.
You need to ensure that the new sales users can connect to the Exchange Server 2013 organization by using Outlook Anywhere from the Internet.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Modify each existing Service Connection Point (5CP) object in Active Directory to point to autodiscover.sales.contoso.com.
B. From DNS Manager, create a host (A) record for autodiscover.sales.contoso.com.
C. On the Client Access servers, deploy a new certificate that includes the autodiscover.sales.contoso.com name.
D. Create a new Autodiscover virtual directory on the Client Access servers and configure ExternalURL to use autodiscover.sales.contoso.com.
E. Create a new Service Connection Point (SCP) object in Active Directory that points to autodiscover.sales.contoso.com.
Answer: B,C
Q4. You have an Exchange Server 2013 organization.
You need to ensure that users receive a notification if the delivery of a message is delayed for more than one hour.
Which cmdlet should you use?
A. Set-FrontEndTransportService
B. Set-MailboxTransportService
C. Set-Tra nsportConf ig
D. Set-TransportService
Answer: D
Q5. You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2.
EX1 and EX2 are the members of a database availability group (DAG) named DAG1.
EX1 and EX2 each contain a copy of a mailbox database named DB1. DB1 is configured to retain deleted items for 120 days.
At the end of each month, the mailbox databases on EX1 are backed up to tape. The monthly backups are retained for two years.
A user named User1 has a mailbox in DB1.
User1 discovers that a mailbox folder that contained important email messages was deleted more than six months ago.
You need to recover the deleted mailbox folder without affecting any other users who have mailboxes in DB1.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Run the New-MaiboxRestoreRequest cmdlet.
B. Run the New-MailboxDatabase cmdlet and specify the Recovery parameter.
C. Restore DB1 from the tape backup to an alternate location.
D. Restore DB1 from the tape backup to the database’s original location.
E. Run the New-Mailbox cmdlet and specify the Recovery parameter.
Answer: A,B,C
Q6. DRAG DROP
You have an Exchange Server 2013 organization.
You plan to delegate the following administrative tasks:
View the status of the message queue.
Create, mount, and dismount databases.
Restore mailboxes from a recovery database,
Modify the settings of Exchange ActiveSync devices.
You need to identify which role group must be used to delegate each administrative task.
The solution must ensure that the role group that has the fewest administrative privileges is used.
Which role groups should you identify? {To answer, drag the appropriate role groups to the correct tasks. Each role group may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer:
Q7. Topic 1, Fabrikam, Inc
Overview
Fabrikam, Inc., is a pharmaceutical company located in Europe. The company has 5,000 users. The company is finalizing plans to deploy an Exchange Server 2013 organization.
The company has offices in Paris and Amsterdam.
Existing Environment
Active Directory Environment
The network contains an Active Directory domain named fabrikam.com. An Active Directory site exists for each office.
Network Infrastructure
The roles and location of each server are configured as shown in the following table.
Client computers run either Windows 7 or Windows 8 and have Microsoft Office 2010 installed.
The Paris office uses the 192.168.1.0/24 IP range. The Amsterdam office uses the 192.168.2.0/24 IP range.
The offices connect to each other by using a high-speed, low-latency WAN link. Each office has a 10-Mbps connection to the Internet.
Planned Exchange Infrastructure
The company plans to deploy five servers that run Exchange Server. The servers will be configured as shown in the following table.
The company plans to have mailbox databases replicated in database availability groups (DAGs). The mailbox databases and DAGs will be configured as shown in the following table.
DAG1 will use FS1 as a file share witness. DAG2 will use FS3 as a file share witness.
You plan to create the following networks on each DAG:
A dedicated replication network named DAGNET1
A MAPI network named DAGNET2
All replication traffic will run on DAGNET1. All client connections will run on DAGNET2.
Client connections must never occur on DAGNET1. Replication traffic must only occur on DAGNET2 if DAGNET1 is unavailable.
Each Exchange Server 2013 Mailbox server will be configured to have two network adapters.
The following two mailbox databases will not be replicated as part of the DAGs:
A mailbox database named AccountingDB that is hosted on EX1
A mailbox database named TempStaffDB that is hosted on EX4
EDGE1 will have an Edge Subscription configured, with both EX1 and EX2 as targets.
Requirements
Planned Changes
An external consultant reviews the Exchange Server 2013 deployment plan and identifies the following areas of concern:
The DAGs will not be monitored.
Multiple Edge Transport servers are required to prevent the potential for a single point of failure.
Technical Requirements
Fabrikam must meet the following technical requirements:
Email must be evaluated for SPAM before the email enters the internal network.
Production system patching must minimize downtime to achieve the highest possible service to users.
Users must be able to use the Exchange Control Panel to autonomously join and disjoin their department's distribution lists.
Users must be able to access all Internet-facing Exchange Server services by using the names of mail.fabrikam.com and autodiscover.fabrikam.com.
The company establishes a partnership with another company named A. Datum Corporation. A. Datum uses the SMTP suffix adatum.com for all email addresses.
Fabrikam plans to exchange sensitive information with A. Datum and requires that the email messages sent between the two companies be encrypted. The solution must use Domain Security.
Users in the research and development (R&D) department must be able to view only the mailboxes of the users in their department from Microsoft Outlook. The users in all of the other departments must be prevented from viewing the mailboxes of the R&D users from Outlook.
Administrators plan to produce HTML reports that contain information about recent status changes to the mailbox databases.
Fabrikam is evaluating whether to abort its plan to implement an Exchange Server 2010
Edge Transport server and to implement a Client Access server in the Paris office instead.
The Client Access server will have anti-spam agents installed.
You are testing the planned implementation of Domain Security.
You discover that users fail to exchange domain-secured email messages.
You open the Exchange Management Shell and discover the output shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users can exchange email messages by using Domain Security.
Which two parameters should you modify by using the Set-SendConnector cmdlet? (Each correct answer presents part of the solution. Choose two.)
A. tlsauthlevel
B. requiretls
C. ignorestarttls
D. tlsdomain
E. domainsecureenabled
F. smarthostauthmechanism
Answer: B,E
Q8. You have an Exchange Server 2010 organization.
Users access Outlook Web App by using the name mail.contoso.com.
You deploy Exchange Server 2013 to the existing organization.
You change the DNS record of mail.contoso.com to point to an Exchange Server 2013
Client Access server.
The users report that they can no longer access their mailbox from Outlook Web App.
The OWA virtual directory in Exchange Server 2010 is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that the users on Exchange Server 2010 can access Outlook Web App.
Which setting should you change?
A. WindowsAuthentication
B. FormsAuthentication
C. LegacyRedirectType
D. FailbackUri
Answer: A
Q9. You have an Exchange Server 2013 organization.
You create two distribution groups named Group1 and Group2. Group1 and Group2 each
contain several hundred users. Group1 contains a user named User1.
You need to configure moderation for Group2. The solution must meet the following requirements:
Email sent from the members of Group1 must NOT be moderated unless the sender is User1.
All other email must be moderated by a user named Admin1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a transport rule that has a condition of The recipient is Group2. Configure the transport rule to have an action of Forward the message for approval to Admin1.
B. Run Set-DistributionGroup Group2 -ModeratedBy Admin1 -BypassModerationFromSendersOrMembers Group1 -ModerationEnabled $true.
C. Create a transport rule that has the conditions of The sender is User1 and The recipient is Group2. Configure the transport rule to have an action of Forward the message for approval to Admin1.
D. Create a transport rule that has the conditions of The sender is User1 and The recipient is Group2. Configure the transport rule to have an action of Forward the message for approval to Admin1.
Answer: B,C
Q10. DRAG DROP
You need to recommend a solution to deploy the Outlook app
Which three actions should you recommend performing in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the order)
(Apps for Outlook can help you personalize your messages or speed up the way you access information on the web.
For example, the Bing Maps app that comes with Outlook shows an online map whenever you open a message that contains a street address.
http://office.microsoft.com/en-us/store/apps-for-outlook-FX102804983.aspxOutlook App Office Store)
Answer: