Q1. DRAG DROP - (Topic 11)
You install a new server named UM1 that has Exchange Server 2010 deployed. UM1 has the Unified Messaging server role installed.
You need to recommend which actions must be performed to configure a certificate for UM1.
Which five actions should you recommend in sequence? (To answer, move the appropriate five actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q2. - (Topic 12)
You have a Lync Server 2013 infrastructure that has Enterprise Voice enabled.
When a caller dials an unassigned number, the caller hears a custom message, and then the caller is forwarded to a user named User1.
Several months later, User1 leaves the company.
You need to ensure that when a caller dials an unassigned number, the caller hears the custom message and is forwarded to a user named User2.
Which cmdlet should you run?
A. Set-CsUnassignedNumber
B. Set-CsAnnouncement
C. Set-CsUser
D. Set- CsVoice Route
Answer: B
Explanation:
http://technet.microsoft.com/en-us/library/gg425752.aspx
Q3. - (Topic 6)
You have a Lync Server 2013 infrastructure. The infrastructure contains two servers. The servers are configured as shown in the following table.
Pool pairing is configured between lyncfe01 and lyncfe02. Currently, the Central Management store is hosted on lyncfe01.
A hardware failure occurs on Lyncfe01.
You manually perform a failover of all the user services and the Central Management store to Lyncfe02.
You resolve the hardware issue on Lyncfe01.
You need to restore all of the user services and the Central Management store to Lyncfe01.
Which three commands should you run? (Each correct answer presents part of the solution. Choose three.)
A. Invoke-CsPoolFailback -PoolFQDN Iyncfe02.contoso.com
B. Invoke-CsManagementServerFailover -BackupSqlServerFQDN lyncfe01.contoso.com BackupSqllnstanceName RTC -Force
C. Install CSDatabase -CentralManagementDatabase -SqlServerFqdn lyncfe01.contoso.com -SQLInstanceName RTC -Clean
D. Invoke-CsPoolFailback -PoolFQDN lyncfe01.contoso.com
E. Move-CsManagementServer
Answer: C,D,E
Explanation: The pool named lyncfe01.contoso.com is the pool that failed over to LyncFE02 when LyncFE01 failed. Therefore, we need to fail back pool lyncfe01.contoso.com to the recovered server.
*
Install CSDatabase Install CSDatabase.
*
Lync Server makes extensive use of SQL Server databases, ranging from the Central Management store to the Archiving database. As a general rule, these databases are set up at the same time you install Lync Server or at the same time you install a Lync Server role (such as Monitoring Server) that requires a database back end. After installation has taken place these databases typically will not need to be reinstalled or moved to new locations. On rare occasions, however, you might need to manually install a Lync Server database; this could be because you need to move a database to another server, or because a setup-related problem failed to install the database for you. The Install-CsDatabase cmdlet provides a way for you to install any of the SQL Server databases used by Lync Server.
*
Invoke-CsPoolFailback Invokes the failback process for a Lync Server 2013 pool. Failback is used after a pool has failed over and the users of that pool have been "failed over" to a backup pool. (That simply means users who were signed on to the failed pool are automatically signed on to the backup pool.) When the failed pool has been restored, the fail back process signs the failed-over users back to their original pool. *Move-CsManagementServer Moves the Central Management Server from one pool to another.
Reference: To use Windows PowerShell cmdlets to configure the SQL Server Central Management store
Q4. - (Topic 6)
Your company has a main office and a branch office. The main office is located in Amsterdam. The branch office is located in New York. Each office has a data center.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. You have a Lync Server 2013 infrastructure that contains 5,000 users.
You plan to deploy a persistent chat infrastructure.
You need to ensure that persistent chat rooms remain available if a Persistent Chat Server
fails.
What should you do?
A. Create one Persistent Chat Server pool that contains two active chat servers.
B. Create two Persistent Chat Server pools that each contains one active chat server and one standby chat server.
C. Create two Persistent Chat Server pools that each contains one active chat server.
D. Create one Persistent Chat Server pool that contains one active chat server and one standby chat server.
Answer: A
Explanation: http://technet.microsoft.com/en-us/library/gg398500.aspx
Q5. - (Topic 12)
You have a Lync Server 2013 infrastructure. The infrastructure contains two sites and is configured for Enterprise Voice. The sites are located in Chicago and Toronto.
Each site has a distinct voice policy, PSTN usage, voice route, and trunk translation rule as shown in the following table.
The voice policy of each site contains the PSTN usage record of its respective site. The voice route of each site uses the trunk assigned to its respective site. The voice route of each site is assigned to the PSTN usage of its respective site.
You need to ensure that all outbound voice calls to the PSTN from the users in the Toronto site are routed through the trunk at the Toronto site. Calls must use the Mediation Server at the Chicago site if the Mediation Server at the Toronto site is unavailable.
What should you do?
A. Add the Chicago-AllCalls voice route to the Toronto-Usage PSTN usage record.
B. Add the Chicago-Usage PSTN usage record to the Toronto-VP voice policy.
C. Add the Chicago-PSTN trunk to the Toronto-AllCalls voice route.
D. Add the Chicago-Usage PSTN usage record to the Toronto-PSTN trunk.
Answer: B
Q6. HOTSPOT - (Topic 12)
You are evaluating the use of Microsoft Lync Online and Lync Server 2013.
Your company has a sales department, a marketing department, and a research department. Each department gives you a list of required features as shown in the following table.
You need to identify which type of Lync deployment can be used for each department.
What should you identify?
To answer, select the valid type of Lync deployments for each department in the answer
area.
Answer:
Q7. HOTSPOT - (Topic 9)
Your need to recommend which DNS records must be created to support the planned migration to Lync Online.
Which DNS records should you recommend creating?
To answer, configure the appropriate record name and target in the dialog box in the answer area.
Answer:
132. HOTSPOT - (Topic 9)
You need to design the Call Park solution.
Which Call Park design should you choose?
To answer, select the appropriate range and application server in the dialog box in the
answer area.
Q8. - (Topic 6)
You have a Lync Server 2013 infrastructure that is configured for audio/video conferencing and Enterprise Voice.
Users report that they cannot connect to audio conferences from a branch office. The branch office is secured and has limited connectivity to other offices.
The users can connect to audio conferences from other offices.
You need to configure the port range used by Microsoft Lync 2013 clients for audio conferencing.
Which cmdlet should you run?
A. Set-CsExternalAccessPolicy
B. Set-CsNetworkConfiguration
C. Set-CsConferencingConfiguration
D. Set-CsMediaConfiguration
Answer: C
Explanation: http://technet.microsoft.com/en-us/library/gg412969.aspx
Q9. - (Topic 5)
You need to recommend a backup solution to meet the technical requirements. Which tool should you include in the recommendation?
A. Export-CsUserData
B. Ocslogger
C. Snooper
D. Get-CsAdContact
E. Dbimpexp
Answer: A
Reference: Export-CsUserData
http://technet.microsoft.com/en-us/library/jj204897.aspx
Export-CsUserData
Detailed Description The Export-CsUserData cmdlet provides a way for administrators to Export User Data and/or Conference Directory for a Lync Server Pool.
That data, which can be saved in the User Data format used by either Lync Server 2013
or Microsoft Lync Server 2010 can then be imported by using the Import-CsUserData cmdlet.
To return a list of all the role-based access control (RBAC) roles this cmdlet has been assigned to
(including any custom RBAC roles you have created yourself), run the following command from the
Windows PowerShell command-line interface prompt:
Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Export-CsUserData"}
Lync Server Control Panel: The functions carried out by the Export-CsUserData cmdlet are not available in the Lync Server Control Panel.
Q10. DRAG DROP - (Topic 9)
You need to plan the subnets for Call Admission Control (CAC) and media bypass.
Which subnet or subnets should you identify for each office?
To answer, drag the appropriate subnet or subnets to the correct office in the answer area. Each subnet may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Answer: