Q1. DNS record types come in many forms, but which record type is being described below?
Maps a domain name such as www.google.com to an IP address
A. A
B. CNAME
C. MX
D. PTR
Answer: A
Q2. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has six network adapters. Two of the network adapters are connected to a network named LAN1, two of the network adapters are connected to a network named LAN2, and two of the network adapters are connected to a network named LAN3.
You create a network adapter team named Team1 from the two adapters connected to LAN1.
You create a network adapter team named Team2 from the two adapters connected to LAN2.
A company policy states that all server IP addresses must be assigned by using a reserved address in DHCP.
You need to identify how many DHCP reservations you must create for Server1.
How many reservations should you identify?
A. 3
B. 4
C. 6
D. 8
Answer: B
Explanation:
2 Adapters = LAN1 = Team1 = 1 IP 2 Adapters = LAN2 = Team2 = 1 IP 2 Adapters = LAN3 = No Team = 2 IP 1 + 1 + 2 = 4
References: Training Guide: Installing and Configuring Windows Server 2012: Chapter 6: Network Administration, Lesson 3: Managing Networking using Windows PowerShell, p. 253
Q3. Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You need to ensure that VM1 can use more CPU time than the other virtual machines when the CPUs on Server1 are under a heavy load.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney s
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: B
Explanation:
B. Resource controls provide you with several ways to control the way that Hyper-V
allocates resources to virtual machine. Resource control in used in the event where you need to adjust the computing resources of a virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify resource controls to automate how resources are allocated to virtual machines.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx http://technet.microsoft.com/en-us/library/cc742470.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144 Training Guide: Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p. 335
Q4. Your network contains an Active Directory domain named contoso.com. The domain contains six domain controllers named DO, DC2, DC3, DC4, DC5 and DC6. Each domain controller has the DNS Server server role installed and hosts an Active Directory-integrated zone for contoso.com.
You plan to create a new Active Directory-integrated zone named litwareinc.com that will be used for testing.
You need to ensure that the new zone will be available only on DC5 and DC6.
What should you do first?
A. Create an Active Directory connection object.
B. Create an Active Directory site link.
C. Create an application directory partition
D. Change the zone replication scope.
Answer: C
Explanation: Zone replication scope: All domain controllers in a specified application directory partition Replicates zone data according to the replication scope of the specified application directory partition. For a zone to be stored in the specified application directory partition, the DNS server hosting the zone must be enlisted in the specified application directory partition. Use this scope when you want zone data to be replicated to domain controllers in multiple domains but you do not want the data to replicate to the entire forest.
Reference: Understanding DNS Zone Replication in Active Directory Domain Services
Q5. Your network contains two DNS servers named DNS1 and DNS2 that run Windows Server 2012 R2. DNS1 has a primary zone named contoso.com. DNS2 has a secondary copy of the contoso.com zone.
You need to log the zone transfer packets sent between DNS1 and DNS2.
What should you configure?
A. debug logging from DNS Manager
B. logging from Windows Firewall with Advanced Security
C. monitoring from DNS Manager
D. a Data Collector Set (DCS) from Performance Monitor
Answer: C
Explanation: Monitoring DNS with the DNS Console The DNS management console includes functionality that enables you to use the console to monitor DNS activity:
*
Event Logging tab: You can access the Event Logging tab located within the Properties dialog box of the DNS server to specify the DNS events that you want to monitor. Through the Event Logging tab, you can limit the events which are written to the DNS Events log.
*
Monitoring tab: The Monitoring tab is also located within the Properties dialog box of the DNS server. This tab allows you to test querying of the DNS server.
Reference: Monitoring and Troubleshooting DNS
Q6. OTSPOT
Your company has a primary data center and a disaster recovery data center.
The network contains an Active Directory domain named contoso.com. The domain contains a server named that runs Windows Server 2012 R2. Server1 is located in the primary data center.
Server1 has an enterprise root certification authority (CA) for contoso.com.
You deploy another server named Server2 to the disaster recovery data center.
You plan to configure Server2 as a secondary certificate revocation list (CRL) distribution point.
You need to configure Server2 as a CRL distribution point (CDP).
Which tab should you use to configure the required CDP entry? To answer, select the appropriate tab in the answer area.
Answer:
197. OTSPOT
You have a server named Server1 that runs Windows Server 2012 R2.
You are configuring a storage space on Server1.
You need to ensure that the storage space supports tiered storage.
Which settings should you configure?
To answer, select the appropriate options in the answer area.
Q7. Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. The File Server Resource Manager role service is installed on Server1. All servers run Windows Server 2012 R2.
A Group Policy object (GPO) named GPO1 is linked to the organizational unit (OU) that contains Server1. The following graphic shows the configured settings in GPO1.
Server1 contains a folder named Folder1. Folder1 is shared as Share1.
You attempt to configure access-denied assistance on Server1, but the Enable access-
denied assistance option cannot be selected from File Server Resource Manager.
You need to ensure that you can configure access-denied assistance on Server1 manually by using File Server Resource Manager.
What should you do?
A. Set the Customize message for Access Denied errors policy setting to Enabled for GPO1.
B. Set the Enable access-denied assistance on client for all file types policy setting to Disabled for GPO1.
C. Set the Enable access-denied assistance on client for all file types policy setting to Enabled for GPO1.
D. Set the Customize message for Access Denied errors policy setting to Not Configured for GPO1.
Answer: D
Explanation:
Ensure that you can configure access-denied assistance http://technet.microsoft.com/en-us/library/hh831402.aspx#BKMK_1
Q8. A user from your organisation has reported to the IT helpdesk that they are receiving the following message:
"Your account is configured to prevent you from using the computer. Please try another computer."
What should you do to enable them to log on to their computer?
A. Use the Dsmove command
B. Click the Log On To button on the Account tab of her user account
C. None of these
D. Click the Allowed To Join Domain button in the New Computer dialog box
Answer: B
Explanation:
The error message is about the user account configuration. This can be set here:
Q9. You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. The imagex.exe command
B. The ocsetup.exe command
C. The setup.exe command
D. The dism.exe command
Answer: D
Explanation: The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /featurename:Server-Gui-Mgmt
Q10. You have a server named Server1 that runs Windows Server 2012 R2. You create a custom Data Collector Set (DCS) named DCS1. You need to configure DCS1 to meet the following requirements:
Automatically run a program when the amount of total free disk space on Server1 drops below 10 percent of capacity.
Log the current values of several registry settings.
Which two should you configure in DCS1? (Each correct answer presents part of the solution. Choose two.)
A. System configuration information
B. A Performance Counter Alert
C. Event trace data
D. A performance counter
Answer: A,B