Q1. OTSPOT
Your network contains an Active Directory domain named contoso.com.
You have several Windows PowerShell scripts that execute when users log on to their client computer.
You need to ensure that all of the scripts execute completely before the users can access their desktop.
Which setting should you configure? To answer, select the appropriate setting in the answer area.
Answer:
Q2. RAG DROP
Your network contains three servers. The servers are configured as shown in the following tablE.
Your company plans to standardize all of the servers on Windows Server 2012 R2.
You need to recommend an upgrade path for each server.
The solution must meet the following requirements: . Upgrade the existing operating system whenever possible. . Minimize hardware purchases. Which upgrade path should you recommend for each server?
To answer, drag the appropriate upgrade path to each server in the answer area.Each upgrade path may be used once, more than once, or not at all.
Answer:
148. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
In a remote site, a support technician installs a server named DC10 that runs Windows Server 2012 R2. DC10 is currently a member of a workgroup.
You plan to promote DC10 to a read-only domain controller (RODC).
You need to ensure that a user named Contoso\User1 can promote DC10 to a RODC in the contoso.com domain.
The solution must minimize the number of permissions assigned to User1.
What should you do?
A. From Active Directory Administrative Center, pre-create an RODC computer account.
B. FromDsmgmt, run the local roles command.
C. Join DC10 to the domain. Modify the properties of the DC10 computer account.
D. Join DC10 to the domain. Run dsmod and specify the /server switch.
Q3. Your company deploys a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. The forest contains a domain controller named DC10.
On DC10, the disk that contains the SYSVOL folder fails.
You replace the failed disk. You stop the Distributed File System (DFS) Replication service. You restore the SYSVOL folder.
You need to perform a non-authoritative synchronization of SYSVOL on DC10.
Which tool should you use before you start the DFS Replication service on DC10?
A. Dfsgui.msc
B. Ultrasound
C. Ldp
D. Replmon
Answer: B
Explanation: Verify that replication is working as designed. Download the Ultrasound Monitoring and Troubleshooting Tool for File Replication Services from the Microsoft Download Center to verify the healgt of the current FRS environment.
Q4. Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named DC1 that runs Windows Server 2012 R2.
You mount an Active Directory snapshot on DC1.
You need to expose the snapshot as an LDAP server.
Which tool should you use?
A. Dsamain
B. Ntdsutil
C. Ldp
D. ADSI Edit
Answer: A
Explanation: Dsamain.exe can you can use to expose the snapshot data as an LDAP server
Q5. Your company has a main office and a branch office.
The network contains an Active Directory domain named contoso.com.
The main office contains a domain controller named DC1 that runs Windows Server 2012 R2.
DC1 is a DNS server and hosts a primary zone for contoso.com. The branch office contains a member server named Server1 that runs Windows Server 2012 R2. Server1 is a DNS server and hosts a secondary zone for contoso.com.
The main office connects to the branch office by using an unreliable WAN link.
You need to ensure that Server1 can resolve names in contoso.com if the WAN link in unavailable for three days.
Which setting should you modify in the start of authority (SOA) record?
A. Retry interval
B. Refresh interval
C. Expires after
D. Minimum (default) TTL
Answer: C
Explanation: Used by other DNS servers that are configured to load and host the zone to determine when zone data expires if it is not renewed
Q6. Your network contains an Active Directory domain named contoso.com. The domain contains six domain controllers. The domain controllers are configured as shown in the following table.
The network contains a server named Server1 that has the Hyper-V server role installed. DC6 is a virtual machine that is hosted on Server1.
You need to ensure that you can clone DC6.
What should you do?
A. Transfer the PDC emulator to DC5
B. Transfer the schema master to DC4
C. Transfer the PDC emulator to DC2
D. Transfer the schema master to DC6
Answer: C
Explanation: A Windows Server 2012 Server running the PDC emulator is required.
The requirements for virtualized DC cloning include:
*
The PDC emulator must run Windows Server 2012. You can clone PDC emulator if it is virtualized.
*
The virtualized DC that is used as a source for cloning must run Windows Server 2012 and be a member of the Cloneable Domain Controllers group.
Note: Using virtualized domain controller cloning in Windows Server 2012 to expedite forest recovery Virtualized domain controller (DC) cloning simplifies and expedites the process for installing additional virtualized DCs in a domain, especially in centralized locations such as datacenters where several DCs run on hypervisors. After you restore one virtual DC in each domain from backup, additional DCs in each domain can be rapidly brought online by using the virtualized DC cloning process. You can prepare the first virtualized DC that you recover, shut it down, and then copy that virtual hard disk as many times as is necessary in order to create cloned virtualized DCs to build out the domain.
Reference: New Features, Assumptions, and Prerequisites for Using This Guide for Planning Active Directory Forest Recovery
Q7. Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The domain contains four domain controllers.
The domain controllers are configured as shown in the following table.
All domain controllers are DNS servers.
You plan to deploy a new domain controller named DC5 in the contoso.com domain.
You need to identify which domain controller must be online to ensure that DC5 can be
promoted successfully to a domain controller.
Which domain controller should you identify?
A. DC1
B. DC2
C. DC3
D. DC4
Answer: C
Explanation:
In order to add a Domain Controller to corp.contoso.com, you need PDC and RID of that domain, not of the root domain. The Domain Naming Master is needed to add, remove and rename domains in the forest, i.e. not for individual Domain Controllers.
Q8. Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs).
Currently, there are no enforced GPOs. The domain contains a top-level organizational unit (OU) for each department. A group named Group1 contains members from each department.
You have a GPO named GPO1 that is linked to the domain.
You need to configure GPO1 to Apply settings to Group1 only.
What should you use?
A. Dcgpofix
B. Get-GPOReport
C. Gpfixup
D. Gpresult
E. Gptedit.msc
F. Import-GPO
G. Restore-GPO
H. Set-GPInheritance
I. Set-GPLink
J. Set-GPPermission
K. Gpupdate
L. Add-ADGroupMember
Answer: J
Explanation:
http://technet.microsoft.com/en-us/library/ee461038.aspx
Q9. Which feature is described below?
You can use the ___ to reduce the number of duplicate blocks of data in storage, you can store much more data in a given amount of storage capacity than was possible in previous releases that used Single Instance
Storage (SIS) or NTFS file system compression.
A. iSCSI Target Server
B. iSCSI Target Boot
C. Multiterabyte Volumes
D. Data Deduplication role service
Answer: D
Explanation:
By using Data Deduplication, general purpose file servers can typically reduce storage capacity utilization by a 2:1 ratio (for example, files that previously used 1 TB would use 500 GB after deduplication). Servers that host virtualization data (such as VHD files) often reduce storage capacity utilization by a 20:1 ratio, which reduces 1 TB of data to 50 GB.
Q10. RAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2.
You configure a new failover cluster named Cluster1. Server1 and Server2 are nodes in Cluster1. You need to configure the disk that will be used as a witness disk for Cluster1.
How should you configure the witness disk?
To answer, drag the appropriate configurations to the correct location or locations. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer: