70-735 Exam - OEM Manufacturing and Deployment for Windows 10

NEW QUESTION 1
HOTSPOT
Exhibit:

You have a computer named Computer 1 that runs Windows 10.
You open Disk Management on Computer l as shown in the exhibit. (Click the Exhibit tab.)
You start Windows Pre installation Environment (Windows PE) on Computer l by using PXE. You need to capture the Windows installation to the data partition on Disk 1.
Which command should you run from Windows PE? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Dism.exe /capture-image /ImageFile: C: Image.wim /CaptureDir: C: /Name: “Windows 10”

NEW QUESTION 2
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You have several pictures that you plan to make available as desktop backgrounds. You copy the installation media for Windows 10 to Computer1.
You need to ensure that the Windows 10 image contains the desktop backgrounds. What should you do first?

• A. Mount the Install.wim file.
• B. Mount the Boot.wim file.
• C. Modify the Winpeshl.ini file.
• D. Create an answer file.
• E. Modify the Windows.ini file.
• F. Create a provisioning package.
• G. Load a catalog file (.clg).
• H. Create a cabinet file (.cab).

Answer: A

NEW QUESTION 3
You haw a WIM file named Image 1.wirn.Image 1.wim contains an image of Windows 10. You obtain the installation media for Microsoft Office 2021.
You need to install Office 7016 in the image in the least amount of time possible. What should you do?

• A. Deploy the image to a compute
• B. Run setup.ex
• C. Capture an image of the computer.
• D. Deploy the image to a compute
• E. Run dism.exe and specify the /Add-Provisioned Appx Package paramete
• F. Capture an image of the computer.
• G. Mount the image offlin
• H. Run dism.exc and specify theAdd-Provisioned Appx Package parameter.
• I. Mount the imag
• J. Run setup.ex
• K. Unmount the imag

Answer: B

NEW QUESTION 4
You are creating an image of Windows 10 that contains a push button reset solution. You manually create a ResetConfrg.xml file that contains the following information.

• A. UTF-8
• B. Unicode
• C. ANSI
• D. Unicode big endian

Answer: A

NEW QUESTION 5
HOTSPOT
You have a reference computer that runs Windows 10. The computer contains a provisioning package named Package1.ppkg. Package1.ppkg is located in C:Packages.
You plan to create an image of the reference computer.
You run sysprep.exe on the computer, and then you start the computer by using Windows Preinstallation Environment (Windows PE).
You need to ensure that the image uses the least amount of disk space possible.
How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 6
You plan to deploy a Windows Preinstallation Environment (Windows PE) image.
Your company uses a graphical application to help installers choose an installation method for Windows 10.
The application must be started by using the following command. installerGui.bat/Full/Interactive
You need to configure Windows PE to run the graphical application during startup. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Create a [boot loader] section in the INI file and add the command.
• B. Create a Boot.ini file in the root folder of the image.
• C. Create a Winpeshl.ini file in the WindowsSystem32 folder of the image.
• D. Create a [LaunchApp] section in the INI file and add the command.
• E. Create a [LaunchApps] section in the INI file and add the comman

Answer: CE

Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpeshlini-referencelaunching- an-app-when-winpe-starts

NEW QUESTION 7
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a custom image of Windows 10. You need to deploy the image to a computer.
Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Apply-CustomDataImage
• F. /Apply-Image
• G. /Apply-Unattend
• H. /Export-Image

Answer: F

NEW QUESTION 8
HOTSPOT
You are building a Windows Pre installation Environment (Windows PE) image. You need to perform the following actions:
• Disable the firewall by using an unattended answer file.
• Add a custom shell application.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Disable the firewall by using an unattended answer file = Run Wpeinit.exe
Add a custom shell application = Winpeshl.ini file https://technet.microsoft.com/en-us/windows/dn938390(v=vs.60)

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders. Some of the update packages contain dependencies to the other update packages. You are unaware of the specific dependencies. You need to add all the update packages to the image in the correct order.
Solution: You run dism.exe/Get-Packages, and then you pipe the output to dism.exe/Add-Package. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-or-removepackages- offline-using-dism

NEW QUESTION 10
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 for a new desktop computer model. You plan to deploy the computer to multiple regions around the world.
You need to add new languages to the image by using Features on Demand language packs. Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Apply-CustomDataImage
• F. /Apply-Image
• G. /Apply-Unattend
• H. /Export-Image

Answer: C

Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-drivers-langsuniversal- apps-sxs

NEW QUESTION 11
DRAG DROP
You need to add drivers to an offline image of Windows 10 by using an answer file.
How should you complete the answer file? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split
bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 12
You are customizing a Windows Recovery Environment (Windows RE) image. You plan to customize the push-button reset experience by using extensibility scripts. You need to add a file to Windows RF that will execute at an extensibility point. Which extension should the file have?

• A. .Js
• B. .exe
• C. .vbs
• D. .msi

Answer: B

Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/deploy-push-buttonreset- features

NEW QUESTION 13
You have a Windows Recovery Environment (Windows RE) image. You make changes to applications, languages, and updates in the image. After the changes, the size of the image increases to 500 MB.
You need to modify the deployment script to ensure that the recovery partition has the required amount of free space. The solution must minimize the space of the recovery partition.
To which size should you set the recovery partition?

• A. 550 MB
• B. 820 MB
• C. 1024 MB
• D. 1524 MB

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/configure-uefigptbased- hard-drive-partitions

NEW QUESTION 14
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question. You apply the latest updates to an image of Windows 10.
You need to remove all the superseded components from the image and to mark the latest updates as permanent
Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Capture-Image
• F. /Cleanup-Image
• G. /Export-Image
• H. /Split-Image

Answer: A

NEW QUESTION 15
DRAG DROP
You plan to deploy a new image of the 64-bit version of Windows 10 by using an answer file. You need to add your company's OEM information to the answer file.
What should you modify in the answer file? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 16
You have an image of Windows 10.
You obtain a feature update for Windows 10.
You need to include the feature update in the image. The solution must minimize the size of the image.
What should you do?

• A. Mount the imag
• B. Run dism.exe /Add-Package, and then run dism.exe /Optimize-Imag
• C. Unmount the image.
• D. Deploy the image to a compute
• E. Install the feature updat
• F. Optimize the drive, and then capture the image.
• G. Download the new installation media for Windows 10. Install Windows 10 on a computer, and then capture the image.
• H. Mount the imag
• I. Run dism.exe /Add-Package, and then run dism.exe /Cleanup-Wi
• J. Unmount the image.

Answer: C

NEW QUESTION 17
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You install Windows 10 on several devices.
You need to add a trusted root certificate to the devices. You must achieve the goal without reinstalling Windows 10.
What should you do?

• A. Mount the Install.wim file.
• B. Mount the Boot.wim file.
• C. Modify the Winpeshl.ini file.
• D. Create an answer file.
• E. Modify the Windows.ini file.
• F. Create a provisioning package.
• G. Load a catalog file (.clg).
• H. Create a cabinet file (.cab).

Answer: F

NEW QUESTION 18
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 that contains a recovery image. You modify the recovery image.
You need to remove all the unnecessary resource files from the recovery image. Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Apply-CustomDataImage
• F. /Apply-Image
• G. /Apply-Unattend
• H. /Export-Image

Answer: H

NEW QUESTION 19
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question. Your company has several images of Windows 10.
The company develops a Universal Windows Platform (UWP) app named App1- App1 is unavailable in the Windows
You need to sideloadApp1 to the image.
Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Capture-Image
• F. /Cleanup-Image
• G. /Export-Image
• H. /Split-Image

Answer: C

NEW QUESTION 20
DRAG DROP
You have an image of Windows l0. The image contains only English (United States) language packs. You need to add Microsoft Windows Client Language-Pack_x64_.fr-fr.cab and Microsoft Windows LanguageFeatures-TextToSpeech-fr-fr-Package.cab to the image.
Which three language packs should you install in sequence? To answer, move the appropriate packs from the list of packs to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 21
You deploy an image of Windows 10 to a reference computer. You add desktop applications to the reference computer.
You run the following command from an elevated command prompt.

What is the result of running the command?

• A. You create a provisioning package of the Universal Windows Platform (UWP) apps installed on the computer.
• B. You create a log file that contains the details of the desktop applications that can be captured.
• C. You capture the user profile settings.
• D. You create a provisioning package of the desktop applications installed on the compute

Answer: B

NEW QUESTION 22
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are preparing an image of Windows 10.
You need to add English, French, and German language packs to the image.
Solution: You mount the image. You run dism.exe and you specify the /Add-Package parameter. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 23
DRAG DROP
You have an image of Windows 10 for a new model of computers.
You seal the image, copy the image to an external hard disk, and then connect the disk to a computer.
You need to deploy the image to the computer. Which three actions should you perform in sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 24
......