700-905 Exam - Cisco HyperFlex for Systems Engineers

NEW QUESTION 1
Which statement about Standalone Cisco UCS Server Deployments is valid?

• A. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
• B. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
• C. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
• D. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment

Answer: C

Explanation:

NEW QUESTION 2
Which uses for the system drive in an HX node are valid? (Choose two.)

• A. Migration
• B. Saving and restoring program state
• C. Virtual machine store
• D. Garbage collection
• E. Write Cache

Answer: BD

Explanation:

NEW QUESTION 3
Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)

• A. Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the Level 4 read-back cache
• B. Write-back (default): Only write information and most commonly used information are deposited in the cache
• C. Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI performance
• D. No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs
• E. Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs
• F. Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI performance

Answer: BCD

Explanation:

NEW QUESTION 4
Which Cisco UCS Server running HXDP supports the largest storage pool?

• A. UCS B200
• B. HX220
• C. HX 240
• D. UCS B480

Answer: C

Explanation:

NEW QUESTION 5
How many DIMMs are supported per memory channel in the Cisco UCS M5 server?

• A. 2
• B. 1
• C. 8
• D. 4

Answer: A

Explanation:

NEW QUESTION 6
How many separate VLANs must each HyperFlex node be configured with running ESXi?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: D

Explanation:

NEW QUESTION 7
Which two processes does failure on a node initiate? (Choose two.)

• A. Distributed pooled data is migrated off nodes to master data store.
• B. Affected node is marked as unhealthy and placed into standby mode
• C. A call-home process is initiated and the failure is reported to TAC
• D. The VMs on the failed node are moved to another node by vSphere high availability
• E. The system is marked unhealthy but remains operational.

Answer: DE

Explanation:

NEW QUESTION 8
HyperFlex is tightly integrated Into the Cisco portfolio, allowing which two powerful service integrations'' (Choose two)

• A. Cloud mobility: CloudCenter enables workload mobility between HyperFlex and public and private clouds, Including private cloud self-service Infrastructure as a service (laaS) capabilities
• B. Application centric infrastructure: ACI enables faster deployment via End-Point Group integration of the HyperFlex clusters into existing application environments
• C. Multi-cloud integration Workloads are able to seamlessly migrate to platforms such as Amazon Web Services: Microsoft Azure and Google Cloud Platform
• D. On-premise container platform: Cisco Container Platform automates repetitive tasks, such as installing Kubernetes and Docker, installing analytics tools, creatingclusters, load balancing, curatmg the O
• E. and even updating the distribution
• F. Data Center Network Monitor: This management platform enables administrators to monitor storage In the HyperFlex solution and provide real-time storage performance for the HyperFlex cluster

Answer: AD

Explanation:

NEW QUESTION 9
Cisco HyperFlex AII-NVMe nodes are expected to be supported beginning in which HXDP version'?

• A. HXDP 4.0.1
• B. HXDP 3.5.1
• C. HXDP 3 5.2
• D. HXDP 4.0

Answer: D

Explanation:

NEW QUESTION 10
Which three advantages of using the M5 generation of HyperFlex servers over the M4 generation are valid? (Choose three )

• A. Support for Cisco VICs
• B. Multiple GPUs
• C. M.2 SATA drive support for faster disk I/O
• D. DDR3 memory
• E. Microsoft Hyper-V support
• F. NVMe support

Answer: CEF

Explanation:

NEW QUESTION 11
Where is the VIC configuration for number type, identify, failover, settings, and bandwidth stored?

• A. in non-volatile memory on the VIC
• B. in UCS Manager service profiles
• C. in VCenter virtual machine image
• D. in UCS Manager server profiles

Answer: D

NEW QUESTION 12
What does the letter W indicate when selecting CPUs for your HX Node (le. HX-CPU 8170M)?

• A. support of 1.5 TB/socket of memory
• B. support for all flash drive array
• C. support for NVMe
• D. support for 768 TB/socket of memory

Answer: A

Explanation:

NEW QUESTION 13
Refer to the exhibit.

Which VIC model supports two wire connectivity to each Fabric Interconnect?

• A. VIC 1227
• B. VIC 1557
• C. VIC 1387
• D. VIC 1457

Answer: C

Explanation:

NEW QUESTION 14
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)

• A. Virtualizing object storage environments by pushing meta data directly to the management server
• B. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel interfaces on vSphere.
• C. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards based on the server profile (MAC/WWN).
• D. Traffic processing for internal and external communication supporting simultaneous HBA and NIC operation on the same physical hardware.
• E. Multiple-interface-card virtualization without any additional driver requirements with integration of the virtualized cards into the Fabric Interconnect infrastructure.
• F. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to individual virtual machines bypassing local hardware requests.

Answer: CDE

Explanation:

NEW QUESTION 15
How many PCIe standards-compliant interfaces do Cisco VICs support?

• A. 512
• B. 128
• C. 256
• D. 64

Answer: C

Explanation:

NEW QUESTION 16
Which two steps should be performed before installing HyperFlex? (Choose two.)

• A. Determine and download recommended hypervisor
• B. Determine and download recommended VCenter required
• C. Download service profile templates
• D. Determine and download recommended UCS firmware required.
• E. Determine and download virtual machine OS' required.

Answer: AD

NEW QUESTION 17
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are three disadvantages of using validated yet mixed hardware? (Choose three.)

• A. "Hardware only" solutions require less latency for data aggregation.
• B. "Software only" solutions are inherently more secure, adhering to government regulations.
• C. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that the consumer is usin
• D. The lack of control over the hardware can result in hardware not beingsecurity-compliant (usually the case with white box solutions) or not being optimally configured for the given HCI solution.
• E. Validated yet "mixed" hardware systems may be supported by thespecific original equipment manufacturers but software vendors require a master level services agreement.
• F. "Software only" solutions can result in a lack of simplicity for installation and maintenanc
• G. While setup and maintenance of an HCI solution might be simple you still need to configure and maintain the hardware part, which is not orchestrated by the HCI solution.
• H. Validated hardware does not mean smooth performance, which particularly applies to hardware that is seldom chosen for the hardware part of the "software only" solution.

Answer: CEF

Explanation:

NEW QUESTION 18
The process of optimizing information is tightly tied to the writing process as it is performed inline as the writing process is being performed The process of data optimization is performed with which two processes? (Choose two)

• A. The primary CVM compresses the data, writes it to its cache drive and mirrors it
• B. ACK is sent to the CVM that the write is about to be initiated
• C. On write, the local lOVisor sends the write to the primary CVM for that block
• D. On read/Writ
• E. the distributed VAAI sends the write to the primary CVM for that block
• F. The secondary CVM compresses the data, reads it from its cache drive and mirrors it

Answer: AC

Explanation:

NEW QUESTION 19
......