98-366 Exam - MTA Networking Fundamentals

certleader.com

Q1. The ipconfig command will: 

A. Configure routers 

B. Display a client's address 

C. Display a client's broadcast mode 

D. Configure DHCP clients 

Answer:

Q2. Which wireless authentication method provides the highest level of security? 

A. Wired Equivalency Privacy (WEP) 

B. IEEE 802.lln 

C. WI-FI Protected Access (WPA) 

D. IEEE 802.11a 

Answer:

Q3. What are three characteristics of Ethernet network topology? (Choose three.) 

A. It uses tokens to avoid collisions on the network. 

B. It can use coaxial, twisted pair, and fiber optic media. 

C. It comprises the largest share of the networks in place today. 

D. It is a non-switching protocol. 

E. It can negotiate different transmission speeds. 

Answer: A,B,D 

Q4. You need to divide a network into three subnets. 

Which device should you use? 

A. Hub 

B. Bridge 

C. Router 

D. Segmenter 

Answer:

Q5. Which network device interconnects computers in a workgroup, is able to be remotely configured, and provides the best throughput? 

A. Unmanaged switch 

B. Hub 

C. Router 

D. Managed switch 

Answer:

Q6. Your home computer is having problems accessing the Internet. 

You suspect that your Internet router's DHCP service is not functioning, so you check your computer's IP address. 

Which address indicates that your router's DHCP service is NOT functioning? 

A. 169.254.1.15 

B. 172.16.1.15 

C. 192.168.1.15 

D. 10.19.1.15 

Answer:

Q7. What is the maximum cable length for a single Cat5 UTP cable run? 

A. 285 feet/86.87 meters 

B. 328 feet/99.97 meters 

C. 432 feet/131.67 meters 

D. 600 feet/182.88 meters 

Answer:

Q8. This question requires that you evaluate the underlined text to determine if it is correct. 

The process of replicating a zone file to multiple DNS servers is called zone replication, 

Select the correct answer if the underlined text does not make the statement correct. Select 'No change is needed" if the underlined text makes the statement correct. 

A. Zone transfer 

B. Zone synchronization 

C. Start of authority 

D. No change is needed 

Answer:

Q9. To which IP configuration does the CIDR notation 192.168.1.1/25 refer? 

A. 192.168.1.1 255.255.255.64 

B. 192.168.1.1 255.255.255.1 

C. 192.168.1.1 255.255.255.32 

D. 192.168.1.1 255.255.255.256 

E. 192.168.1.1 255.255.255.128 

Answer:

Q10. What is an example of a network device that associates a network address with a port? 

A. Switch 

B. Router 

C. Hub 

D. DSL modem 

Answer: