Q1. - (Topic 3)
A system is being taken from AIX 6 to AIX 7. Systems application and user data must be preserved. Which upgrade method will support this requirement?
A. Migration
B. Preservation
C. New and Complete Overwrite
D. NIM customization with a mksysb
Answer: A
Q2. - (Topic 4)
Given the output below, what is the purpose of the ent5 and ent6 interfaces?
A. Provides multiple logical networks using the IEEE 802.1 Q standard
B. Monitors packet headers and creates the appropriate default routes
C. Enables primary and backup EtherChannel adapter failover monitoring
D. Allows the use of a IPv4 alias within the same subnet as the base adapter
Answer: A
Q3. - (Topic 2)
Given the following Isdev output, which command will identify the underlying devices and network type of ent4 below?
root@server1:/#Isdev-I ent4 ent4 Available EtherChannel / IEEE 802.3ad Link Aggregation
A. Isdev-dev ent4 -attr
B. Iscfg-vl ent4
C. cfgmgr-1|grepent4
D. Isattr-EI ent4
Answer: D
Q4. - (Topic 2)
The AIX hosts node1 and node2 have Ethernet adapters, both named ent0, configured on the same network. Both are dedicated physical 1GB adapter ports in a Host Ethernet
Adapter. Based on this information and the output shown for each node, what is the most likely cause of intermittent failures and slow communication between these adapters?
A. The jumbo_frarnes setting is 'no' and should be set to 'yes'.
B. The Multi-Core Scaling mode is enabled. Multi-Core Scaling is interfering with communications because the processor is too busy.
C. The Shared Ethernet Adapter does not have enough bandwidth to accommodate the network traffic.
D. The media speed is set differently on the adapters than the endpoints on the switch.
Answer: D
Q5. - (Topic 4)
With regard to GLVM mirroring, which of the following is a true statement?
A. Mirrored locations are limited to being 254 miles apart
B. Data mirroring is performed over standard TCP/IP networks
C. GLVM requires any hosted database applications to be mirror-tolerant.
D. Production and backup sites must use the exact same model of IBM Power System server
Answer: A
Q6. - (Topic 2)
Which is a benefit of dynamic tracking of Fibre Channel devices?
A. I/O failures are prevented with Fibre Channel tape devices.
B. SAN changes are automatically detected.
C. SAN disk arraysare created with a common set of disk attributes.
D. NPIV support is added for all AIX Fibre Channel adapters.
Answer: B
Q7. - (Topic 2)
An AIX LPAR has been saved using the mksysb command to a file called LPAR1_mksysb located in the /backup directory. Which command displays the contents of the mksysb backup?
A. mksysb-v-f/backup/LPAR1_mksysb
B. restore -Tqf /backup/LPAR1_mksysb
C. listvgbackup -f/backup/LPAR1_mksysb
D. backup-i -v-f/backup/LPAR1_mksysb
Answer: C
Q8. - (Topic 1)
A system that will be re-installed has the following characteristics:
If the following target_disk_data stanza is defined in the bosinst.data file used for the
install, which disk will be installed with the operating system?
target_disk_data:
LOCATION = 0006bf1c3d817913
SIZE_MB =
HDISKNAME = hdisk1
A. hdisk0
B. hdisk1
C. hdisk2
D. hdisk3
Answer: C
Q9. - (Topic 1)
An administrator notices that the ntp group subsystem is not starting up at boot time. What will cause this issue?
A. The /etc/ntp.conf file has the following line commented out broadcastserver
B. The following line is commented outinthe/etc/inetd.conf file: ntp 123/tcp # Network Time Protocol
C. The following line is commented out of the /etc/inittab file: xntpd: 23456789:respawn:/usr/sbin/xntpd > /dev/console 2>&1 #Start ntp daemon
D. The /etc/rc.tcpip file has the following line commented out: start /usr/sbin/xntpd "$src_running"
Answer: D
Q10. - (Topic 4)
An LPAR is the Global Environment for a number of both Shared and Private System WPARs. An administrator migrated the LPAR from AIX 6.1 to 7.1. What action must be performed to ensure the functionality of all Shared WPARs?
A. migwpar-A
B. wparmig -all
C. instaiip -w-s
D. update_all-wpar
Answer: A