DES-6322 Exam - Specialist - Implementation Engineer-VxRail Exam

NEW QUESTION 1
What is a benefit of using the VxRail REST API?

• A. Remote upgrades of iDRAC related software only
• B. Automated security audit of VxRail clusters
• C. Automated log collection for VxRail clusters
• D. Polling for vSAN performance statistics

Answer: C

NEW QUESTION 2
In a VxRail Stretched Cluster deployment of 8 nodes on between sites?

• A. Primary to Witness site RTT: < 250 ms Secondary to Witness site RTT; < 250 ms Primary to Secondary site RTT: < 5 ms
• B. Primary to Witness site RTT: < 150 ms Secondary to Witness site RTT: < 150 ms Primary to Secondary site RTT: < 10 ms
• C. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT: < 200 ms Primary to Secondary site RTT: <: 5 ms
• D. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT < 200 ms Primary to Secondary site RTT: < 10 ms

Answer: B

NEW QUESTION 3
What setting is used for the object space reservation in the VXRAIL-SYSTEM-STORAGE-PROFILE?

• A. 50% Reservation
• B. Thick Provisioning
• C. 75% Reservation
• D. Thin Provisioning

Answer: D

NEW QUESTION 4
During the activation of Internal SRS, the implementation engineer receives a message that the deployment has failed What is a possible cause?

• A. SRS VE Gateway on the same subnet as the VxRail Manager
• B. VxRail status already set to installed' in IB database
• C. Site ID mismatch between the IB database and the SRS Wizard
• D. Witness Gateway not configured following Dell best practices

Answer: A

NEW QUESTION 5
An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.
What procedure would result in the quickest node addition?

• A. RASR Factory Image Upgrade
• B. Factory Reset
• C. VxRail Node Imaging Management
• D. Compute node expansion

Answer: D

NEW QUESTION 6
How should an administrator manually validate the DNS readiness of a customer network?

• A. Run a traceroute to the DNS server
• B. Generate a Network PEQ
• C. Ping the default gateway of the management VLAN
• D. Run nslookup on server FQDN and IP

Answer: A

NEW QUESTION 7
What is a valid 2-node VxRail cluster configuration?

• A. Series with 4x 25 GbE in a direct-connect configuration
• B. Series with 4x 10 GbE in a switch configuration
• C. Series with 4x 1 GbE in a direct-connect configuration
• D. Series with 2x 25 GbE in a switch configuration

Answer: B

NEW QUESTION 8
The VxRail Deployment Wizard is being used on a VxRail cluster with a customer-supplied VDS. Which settings must be used to ensure successful installation?

• A. Use the VxRail vCenter Server Upload a configuration file (JSON)
• B. Join an external vCenter Server Use the step-by-step method
• C. Use the VxRail vCenter Server Use the step-by-step method
• D. Join an external vCenter Server Upload a configuration file (JSON)

Answer: C

NEW QUESTION 9
A VxRail 7.0.100 environment is managed by the internal vCenter Server. The customer asks the implementation engineer to deploy a new VxRail cluster using the existing vCenter Server.
What should the response of the engineer?

• A. Not supported for internal vCenter Server
• B. Not supported on VxRail software 7.0.100
• C. Supported by neither the internal vCenter Server nor external vCenter Server
• D. Only supported on VxRail software 4.7.xxx

Answer: D

NEW QUESTION 10
A company has multiple VxRail systems installed at geographically dispersed data centers They want to upgrade all their VxRail systems to the latest release- Before the upgrade, they want an inventory report of all the VxRail systems which shows the current health status and versions of all installed VxRail components.
What should be used to meet these requirements?

• A. MitrendVxRail Log insight
• B. VxRail Plugin for vCenter Server DRM Services
• C. itrendLive Optics
• D. VxRail Plugin for vCenter Server VxRail API

Answer: A

NEW QUESTION 11
Where can an administrator find steps to perform a manual verification of the customer network?

• A. Customer Simplified Form
• B. Dell EMC VxRail Network Planning Guide
• C. Pre-Engagement Questionnaire (PEQ)
• D. Dell Technologies SolVe Online

Answer: D

NEW QUESTION 12
Match each VxRail API request with the information to be retrieved.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 13
What is a supported witness configuration for a 3+3+1 VxRail Stretched Cluster?

• A. vSAN Witness appliance with customer provided license
• B. Physical ESXi host with included cluster license
• C. Physical ESXi host with multiple VxRail clusters as witness
• D. vSAN Witness appliance or a physical ESXi host

Answer: D

NEW QUESTION 14
Match each VxRail data protection solution with its functionality.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?

• A. S Series
• B. V Series
• C. G Series
• D. P Series

Answer: A

NEW QUESTION 16
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?

• A. SSH to the VxRail Manager VM with the mystic user SU to rootGo to the /opt/VxRail/config directorySCP the initial-config json file to a local location
• B. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data SentUse the Download option
• C. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directoryGET the config-initial json file
• D. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > SystemUse the Product Documentation option

Answer: B

NEW QUESTION 17
A systems engineer needs to check the health of the nodes and the system VMs to prevent complications or failures during VxRail upgrades. Which tool must be used to perform the task?

• A. VxVerify
• B. CloudlQ
• C. SolVe Online
• D. VxRail ACE

Answer: C

NEW QUESTION 18
An implementation engineer is expanding an existing VxRail E Series cluster with an additional node The version of the node is not at the current cluster level and is not compatible
What action must be performed before adding the node?

• A. Order node with correct image
• B. RASR Factory Reset
• C. RASR Factory Image Upgrade
• D. Compute node expansion

Answer: A

NEW QUESTION 19
An implementation engineer is tasked with setting up RecoverPoint for VMs on a single G Series chassis. How many VMs are licensed to be protected on the cluster?

• A. 5
• B. 10
• C. 15
• D. 20

Answer: C

NEW QUESTION 20
......