H12-211 Exam - Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD)

certleader.com

Want to know H12-211 Study Guides features? Want to lear more about H12-211 Dumps experience? Study H12-211 Study Guides. Gat a success with an absolute guarantee to pass HUAWEI H12-211 (Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD)) test on your first attempt.

Also have H12-211 free dumps questions for you:

NEW QUESTION 1
Which of the following descriptions regarding IPv6 addresses are correct?(Choose two)

  • A. IPv6 addresses are 64 bits in length.
  • B. IPv6 addresses are 128 bits in length.
  • C. IPv6 extension headers are processed in order.
  • D. IPv6 extension headers are processed randomly.

Answer: BC

NEW QUESTION 2
<Huawei>reset saved-configuration
Warning: The action will delete the saved configuration in the device. The configuration will be erased to reconfigure. Continue? [Y/N]:
Refer to the configuration output. Which of the following statements are true? (Select two answers)

  • A. A user should enter ‘Y’ when wishing to clear the saved configuration file.
  • B. The saved-configuration file that the device starts with can be erased.
  • C. The saved-configuration will be deleted after typing N
  • D. The saved-configuration file will be replaced with the current-configuration.

Answer: AB

NEW QUESTION 3
When configuring a router as a PPPoE client, which configuration is not necessary?

  • A. Configuration of the dialer-rule
  • B. Configuration of the dialer interface
  • C. Configuration of an IP address on the dialer interface
  • D. Configuration of a password on the dialer interface

Answer: C

NEW QUESTION 4
Which of the following IPv6 addresses can be configured on a router’s interface?(Choose two).

  • A. fe80:13dc::1/64
  • B. ff00:8a3c::9b/64
  • C. ::1/128
  • D. 2001:12e3:1b02::21/64

Answer: AD

NEW QUESTION 5
To provide the information about the IP addresses that a user packet traverses along the path to thedestination, which of the following does Tracert record in each expired ICMP TTL packet?

  • A. Destination port
  • B. Source port
  • C. Destination address
  • D. Source address

Answer: D

NEW QUESTION 6
In port aggregation, “multiple” ports are aggregated to form a port aggregation group so that all the memberports in the group share the outgoing/incoming load. At which layer is port aggregation implemented?

  • A. Physical Layer
  • B. Data Link Layer
  • C. Network Layer
  • D. Transport Layer

Answer: B

NEW QUESTION 7
In a small network suppporting IPv6, a network administrator wishes implement RIPng. Which of the followingcommands should be used to enable this protocol?

  • A. [RTA-GigabitEthernet0/0/0]ripng 1 enable
  • B. [RTA]ripng 1 enable
  • C. <RTA>ripng 1 enable
  • D. [RTA-ripng-1]ripng 1 enable

Answer: A

NEW QUESTION 8
Refer to the graphic. Host A is located in a private network. It is required that Host A not only be capable ofrouting traffic over the public network, but also that public users are able to actively communicate with Host A.
Which NAT translation method should be configured on the gateway?

  • A. Static NAT
  • B. Dynamic NAT
  • C. Easy-IP
  • D. NAPT

Answer: A

NEW QUESTION 9
Source Destination Protocol Info
10.1.12.1 10.0.12.2 TCP 50190 > telnet [SYN] Seq=0 Win=8192 Len=0 MSS=1460
10.1.12.2 10.0.12.1 TCP telnet> 50190 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460
10.0.12.1 10.0.12.2 TCP 50190 > telnet [ACK] Seq=1 Ack=1 Win=8192 Len=0
Refer to the capture output.The administrator has captured three packets in the network. Which statementregarding the capured packets is incorrect?

  • A. This packets represent a TCP three-way handshake process.
  • B. 10.0.12.1 is the telnet server, while 10.0.12.2 is the telnet client.
  • C. The three packets contain no application data.
  • D. 10.0.12.1 uses port 50190 to buid the telnet connection.

Answer: B

NEW QUESTION 10
What of the following statements is correct regarding access control list types and ranges?

  • A. A basic ACL value ranges from 1000-2999
  • B. An advanced ACL value ranges from 3000-4000
  • C. A layer 2 ACL value ranges from 4000-4999
  • D. An interface ACL value ranges 1000-2000

Answer: C

NEW QUESTION 11
Host A has been connected to switch A and configured with an IP address. When Host A initially forwards aframe, what action will be taken by Switch A?

  • A. Switch A will drop this frame.
  • B. Switch A will attempt to flood the frame to all ports except for the G0/0/1 interface.
  • C. Switch A will forward the frame via ports G0/0/1, G0/0/2 and G0/0/3.
  • D. Switch will receive this frame before returning the frame to G0/0/1.

Answer: B

NEW QUESTION 12
Refer to the graphic.RTA and RTB connect to a Frame Relay switch and use dynamic address mapping. Thecommand “fr map ip 10.0.1.1 32” is then configured on RTB, without using the undo inarp command. What willoccur as a result?(Choose two).

  • A. RTB will be unable to communicate with RTA
  • B. 10.0.1.1 will still be mapped to DLCI 31 on RTB
  • C. 10.0.1.1 will still be mapped to DLCI 32 on RTB
  • D. DLCI 32 will be activated on RTB

Answer: AC

NEW QUESTION 13
On VRP platform, which of the following parameters can be used together with the "ping" command to specifythe source address of an echo request message?

  • A. A
  • B. S
  • C. D
  • D. N

Answer: A

NEW QUESTION 14
Refer to the graphic. RTA and RTB have established a GRE tunnel, but only RTA has enabled the keepalivefunction. When RTB receive a keepalive message from RTA, how will RTB respond?

  • A. RTB will discard the keepalive message.
  • B. RTB willl record receipt of the keepalive message but won’t reply
  • C. RTB will send a keepalive in response.
  • D. RTB will send a keepalive reply and begin to actively send keepalive messages.

Answer: C

NEW QUESTION 15
In a network supporting IPv6, OSPF no longer supports which feature?

  • A. multiple areas
  • B. Router-ID
  • C. authentication
  • D. multicast updates

Answer: C

NEW QUESTION 16
Which of the following descriptions regarding eSight is not correct?

  • A. eSight is used to monitor and manage enterprise networks.
  • B. eSight supports only Huawei devices
  • C. eSight supports WLAN management and monitoring of hotspot coverage.
  • D. eSight supports the backup of configuration files and network traffic analysis.

Answer: B

NEW QUESTION 17
Refer to the graphic. The network administrator wishes to aggregate the two links as member interfaces of Ethtrunk
Which statement is correct?

  • A. The interfaces will be aggregated with load balancing.
  • B. The interfaces will be aggregated, but only interface GE0/0/1 will send data flow.
  • C. The interfaces will be aggregated, but the Eth-trunk will not be active.
  • D. The interfaces cannot be aggregated.

Answer: D

NEW QUESTION 18
Which of the following steps are necessary to configure OSPF on a Huawei router?(Choose three)

  • A. Configuration of a router ID
  • B. Enabling of an OSPF process
  • C. Specifying an OSPF area
  • D. Configuration of the network segments within each area

Answer: BCD

Recommend!! Get the Full H12-211 dumps in VCE and PDF From Surepassexam, Welcome to Download: https://www.surepassexam.com/H12-211-exam-dumps.html (New 233 Q&As Version)