HPE0-J57 Exam - Designing HPE Storage Solutions

NEW QUESTION 1
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD’s configured with RAID5 7+1. They plan to add four more 3.84 TB SSD’s.
What needs to be changed on the configuration once the new SSD’s are installed?

• A. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.
• B. Change the availability level from cage to magazine.
• C. Adjust the cpg growth value to match amount of SSD’s.
• D. Change the cpg setsize to RAID5 5+1 and run tunesys.

Answer: D

NEW QUESTION 2
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)

• A. Loss of persistent cache
• B. B-series SAN switch upgrades
• C. Firmware upgrade
• D. Node maintenance or failure
• E. Loss of full-mesh cluster interconnect

Answer: CD

NEW QUESTION 3
A customer has deployed an HPE 3PAR StoreServ 8400 with two nodes and three additional disk enclosure .They want to expand the solution with two additional nodes and three additional disk enclosure ..What must you do to expand the customers solution?

• A. The new disks must be imported before the new nodes can be added
• B. The existing nodes need to be take Offline
• C. The system should be updated to the latest supported OS before the hardware expansion
• D. The new nodes and enclosure must be placed in an adjacent racks

Answer: C

NEW QUESTION 4
Which statement is correct when comparing functionalities of the AF,CF, and SF series in the nimble storage portfolio?

• A. Zero copy clone are unique feature of all flash array within the nimble portfolio
• B. SF series supports storage snapshots and replication using veeeam backup & replication CS and AF series support storage snapshot only.
• C. Inline deduplication for complete array capacity in combination with compression is offered by the AF and SF series only (67) need to check
• D. 99.9999% availability measured and guaranteed for AF and CF series arrays, SF series array offer 99.999% availability.

Answer: C

NEW QUESTION 5
You are planning an upgrade to a customer’s existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.
Which statement is correct about performing this upgrade?

• A. When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.
• B. The MPIO service will do a failover, and the servers will continue to have access via two paths.
• C. Windows servers require host explorer is installed to ensure MPIO is unaffected.
• D. As long as MEM driver is installed on VMware vSphere, no path failures are seen.

Answer: A

NEW QUESTION 6
A customer has a SAN infrastructure with an HPE C-Class blade enclosure, and a mix of ProLiant G7, Gen8 and Gen9 servers. They require a new storage platform.
How can you confirm the new storage array will be supported in the existing environment?

• A. Design an array with an older version of the firmware to ensure compatibility.
• B. Document existing server and SAN information, and consult SPOCK to ensure firmware compatibility.
• C. Design an array with the latest firmware, and recommend that the customer engage HPE PointNext to upgrade the existing hardware.
• D. Check recommended firmware levels in the HP SAN Design Reference Guide to ensure firmware compatibility.

Answer: B

NEW QUESTION 7
A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.
What must you install to enable the integration?

• A. HPE SAN Network Advisor Enterprise
• B. HPE SAN Network Advisor Professional
• C. 3PAR Host Explorer
• D. OneView Global Dashboard

Answer: B

NEW QUESTION 8
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?

• A. Store virtual Peer motion
• B. HPE 3PAR Remote Copy
• C. Recovery Manager central
• D. StoreServ Peer Motion

Answer: C

NEW QUESTION 9
Match the data access type in a SAN fabric to the correct description.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 10
A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes.
Which single HPE storage platform can you present to the customer that will meet both of their needs?

• A. HPE Nimble SF series
• B. HPE StoreEasy Gateway
• C. HPE StoreOnce
• D. HPE Nimble CS series

Answer: C

NEW QUESTION 11
An HPE 3PAR StoreServ 9000 All-Flash Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.
Which HPE license is required to meet the customer’s technical requirements?

• A. Intelligent Resilient Framework licenses
• B. HPE StoreOnce Replication
• C. Extended Fabric
• D. HPE 3PAR Remote Copy

Answer: D

NEW QUESTION 12
A customer need to server 40TB via file protocols including SMB and FTP to a board range of
client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?

• A. HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway
• B. HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona
• C. HPE StoreOnce 5500with data in fight encryption .
• D. HPE XP7 storage with encryption ready disk adapters

Answer: B

NEW QUESTION 13
You are designing a solution that will have a new HPE Synergy frame and an HPE 3PAR StoreServ 8200 storage array with only the built-in ports. This new environment must keep the infrastructure within the data center to a minimum.
Which interconnect module will achieve this goal?

• A. Synergy 25-50Gb F8 Switch Module
• B. 6125G/XG Ethernet Blade Switch
• C. Synergy 20Gb Interconnect Link Module
• D. Virtual Connect SE 40Gb F8 Module

Answer: D

NEW QUESTION 14
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?

• A. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
• B. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
• C. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
• D. Design an array with older version of the firmware to ensure compatibility

Answer: B

NEW QUESTION 15
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?

• A. Persistent Memory
• B. Persistent port (96)
• C. Peer persistenceD Persistent Cache

Answer: B

NEW QUESTION 16
Users are complaining about poor performance with their Data Warehouse application. What is an effective solution to increase their performance at minimal cost?

• A. HPE 3PAR Adaptive Flash Cache
• B. HPE 3PAR Priority Optimization
• C. HPE 3PAR Dynamic Optimization
• D. HPE 3PAR Adaptive Optimization

Answer: B

NEW QUESTION 17
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statements is correct when discussing the IRF limits for this configuration?

• A. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
• B. A maximum of two switches can be used in an IRF stack when connecting storage.
• C. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
• D. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.

Answer: B

NEW QUESTION 18
A customer has a large deployment of HPE Synergy compute modules. HPE 3PAR StoreServ arrays, and HPE StoreOnce system in a single data center. They are concerned about the risk of data loss due to site disaster and seeks cost-effective offsite Disaster Recovery protection without the need to deploy a secondary site.
Which HPE solution should you recommend?

• A. HPE StoreOnce VSA
• B. HPE StoreOnce CloudBank
• C. HPE StoreOnce RMC
• D. HPE StoreOnce Catalyst

Answer: D

NEW QUESTION 19
You are presenting the HPE StoreEver portfolio to a media agency. What advantage is offered when using LTFS?

• A. file management capabilities will be provided with tape cartridges
• B. WORM functionality for file, block and object storage access on tape
• C. file encryption with public and private key management
• D. file and block data management within an HPE HSM solution

Answer: A

NEW QUESTION 20
Due to industry regulation a customer is required to store backup at a separate data center from the company’s main data center. The customer application require fast backup and quick restore increase of data lose. Which solution allow the customer to meet both industry and application requirement?

• A. HPE storeServe 3par in main and secondary data center with RCIP replication between arrays
• B. Nimble AF series in main data center and Nimble SF series in secondary data center
• C. HPE Storeserve 3Par in main data center HPE StoreOnce in secondary data center with RMC
• D. HPR StoreServ 3PAR in main data center and HPE StoreOnce in both main and secondary data center.

Answer: C

NEW QUESTION 21
A customer recently acquired another company and found that the existing infrastructure
was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly and possible. Which solution you recommend?

• A. Simplicity 380
• B. Bladesystem 7000
• C. Converged systems
• D. Synergy 12000

Answer: A

NEW QUESTION 22
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?

• A. N_PORT
• B. FL_PORT (WRONG)
• C. F_PORT
• D. E_PORT (Correct)

Answer: D

NEW QUESTION 23
......