Want to know Ucertify HPE0-S60 Exam practice test features? Want to lear more about HP Delta - HPE Compute Solutions certification experience? Study Highest Quality HP HPE0-S60 answers to Regenerate HPE0-S60 questions at Ucertify. Gat a success with an absolute guarantee to pass HP HPE0-S60 (Delta - HPE Compute Solutions) test on your first attempt.
HP HPE0-S60 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- B. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
- C. All logical interconnects configured using this logical Interconnect group will report inconsistency
- D. All logical interconnects configured using this logical interconnect group will be automatically updated
Answer: A
NEW QUESTION 2
Match HPE Superdome Flex system with its specific feature.
Solution:
HPE Superdome flex in all 4
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 3
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- B. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- D. This logical JBOD can be presented to the compute nodes in a different frame.
Answer: C
NEW QUESTION 4
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)
- A. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
- B. HPE MSA 2062 Storage Array is not supported in HPE OneView
- C. HPE OneView replaces array management tools for both types of array
- D. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
- E. HPE Primera 650 can be managed using HPE OneView.
Answer: AD
NEW QUESTION 5
Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.
What must the customer do before migrating the application?
- A. Migrate the application to a Logical JBOD and connect it to the new server
- B. Copy the server profile and assign the clone to the new hardware
- C. Edit the server profile and change server hardware type
- D. Create a new server profile template and apply to the new hardware
Answer: C
NEW QUESTION 6
The proposal consists of.
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)
- A. The selected interconnect modules do not provide the requested WWN virtualization
- B. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
- C. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
- D. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
- E. Remove 4 HPE Composer 2 modules from the design, as they are not required
Answer: BD
NEW QUESTION 7
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame Which statement about this setup is true?
- A. The customer must create at least five logical enclosures for this setup.
- B. To manage 15 frames, additional HPE Composers are required.
- C. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.
- D. If properly cabled, any compute node can access any HPE D3490 storage module
Answer: A
NEW QUESTION 8
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?
- A. CPG management
- B. Volume provisioning
- C. Cache management
- D. Replication setup
Answer: B
NEW QUESTION 9
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. Existing 2-port FLM modules must be replaced with 4-port FLM modules
- B. A management ring can contain mixed frame link module configurations
- C. A management ring with mixed FLM modules cannot have more than 12 frames
- D. Mixing different FLM modules is allowed if all of them have the same firmware version
Answer: C
NEW QUESTION 10
What is one of me benefits of using HPE Composer 2?
- A. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- B. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- C. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- D. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
Answer: A
NEW QUESTION 11
Put the steps of the HPE infosight flow in the correct order.
Solution:
(observing, learning, predicting, recommending, acting)
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 12
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol
What must be done to complete this task?
- A. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- B. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- C. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- D. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
Answer: B
NEW QUESTION 13
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group
What should you check to fix the issue?
- A. if both FiexNICs are configured with the same speed
- B. If the logical enclosure is built on at least three HPE Synergy frames
- C. if both FiexNICs are connected to different networks
- D. if the logical enclosure is configured with redundant master modules
Answer: A
NEW QUESTION 14
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It is equipped with HPE Persistent memory by default
- B. It can support a single processor only and up to 4 per chassis
- C. It is fully managed using HPE OneView including all connections
- D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
Answer: B
NEW QUESTION 15
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
- B. All new HPE SimpliVity models are based on AMD CPUs
- C. All new HPE SimpliVity models support deduplication and compression
- D. New HPE SimpliVity deployments are licensed per node not per physical socket
Answer: C
NEW QUESTION 16
......
Thanks for reading the newest HPE0-S60 exam dumps! We recommend you to try the PREMIUM Certshared HPE0-S60 dumps in VCE and PDF here: https://www.certshared.com/exam/HPE0-S60/ (79 Q&As Dumps)