Act now and download your Network-Appliance NS0-520 test today! Do not waste time for the worthless Network-Appliance NS0-520 tutorials. Download Updated Network-Appliance NetApp Certified Implementation Engineer - SAN. ONTAP exam with real questions and answers and begin to learn Network-Appliance NS0-520 with a classic professional.
Also have NS0-520 free dumps questions for you:
NEW QUESTION 1
Which two components should be installed to support VMware VMFS6 datastores in an environment with only Ethernet switches? (Choose two)
- A. V_StorageAttach license
- B. Host Utilities
- C. NetApp Virtual Storage Console
- D. iSCSI licenses
Answer: CD
Explanation:
Installing VSC is the best practice recommended by Netapp when you use VMware and this is an environment with only Ethernet switch, so ISCSI licenses are needed to present LUNs to the Virtual
environment.
You can find more information on this link:
https://docs.netapp.com/us-en/netapp-solutions/pdfs/sidebar/VMware_vSphere_with_ONTAP_Best_Practices.p
NEW QUESTION 2
Referring to the exhibit, which container gains space savings from deduplication, compression and compaction?
- A. the aggregate
- B. the qtree
- C. the volume
- D. the LUN
Answer: C
NEW QUESTION 3
An administrator is planning a hardware refresh and data migration from a Data ONTAP 7.3 system to new AFF A3-00 cluster that is using ONTAP 9.0. The Mode system only serves FC LUNs to a Windows 2012Rs server cluster that needs to remain connected after migration Referring to the scenario, which method would be used for the LUN migration.
- A. Unified Host Utility Kit
- B. 7-Mode Transition Tool (7MIT)
- C. Foreign LUN import (FLI)
- D. Oncommand system Manager
Answer: B
NEW QUESTION 4
Which topology allows for guaranteed maximum network performance for iSCSI?
- A. isolated VLAN network
- B. MetroWAN network
- C. direct connect
- D. WAN network
Answer: C
NEW QUESTION 5
On your ONTAP 9.5 cluster, you need to set up the onboard key manager with hardware-based security and volume encryption.
Which two licenses are required in this situation? (Choose two.)
- A. FDE
- B. TPM
- C. VE
- D. RSA
Answer: CD
NEW QUESTION 6
You need to configure iSCSI on your existing ONTAP cluster in a new SVM. The iSCSI LUNs will be served over a new Layer 2 network using the same physical ports that also use the CIFS protocol on a different SVM.
Which two actions should you perform to accomplish this task? (Choose two.)
- A. Create a new portset.
- B. Create a new VLAN.
- C. Create a new broadcast domain.
- D. Create a new AD object.
Answer: BC
NEW QUESTION 7
What does the space allocation argument in a lun create command do?
- A. It thick provisions the LUN.
- B. It only disables space reclamation (or the LUN.
- C. It thin provisions the LUN,
- D. It enables or disables space reclamation for the LUN
Answer: D
NEW QUESTION 8
A customer is required to encrypt iSCSI traffic across their public network. In this scenario, which method will accomplish this task?
- A. dot1q
- B. IPsec
- C. NVMe
- D. CHAP
Answer: B
NEW QUESTION 9
During maintenance of an AFF A250 node, you want to move the SAN LIFs that are members of a port set. In this scenario, which two statements are true? (choose two)
- A. You must disable SLM for the node that hosts the LIF
- B. You need to disable the zoning of the LIF WWPN
- C. The LIF must be removed from the port set
- D. You must take the SAN LIF offline
Answer: CD
Explanation:
If the LIF is a member of a port set, the LIF must have been removed from the port set before the LIF can be moved to a different node.
Change the status of the LIF to down (offline) You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanag%2FGUID-09F5C2A3-FA6
NEW QUESTION 10
Exhibit.
The VMware ESX host discovers only two of four paths to a LUN on a new ONTAP cluster. Referring to the exhibit, which statement Is correct?
- A. The fabric zoning configuration does not allow access to the target LlFs.
- B. The igroup does not contain th
- C. WWPN of one initiator.
- D. The fabric name server is disabled.
- E. The initiator HBA is not connected to the fabric.
Answer: D
NEW QUESTION 11
You currently have a FAS8200 with ONTAP 9.5. You want to expand the front end FC I/O capabilities. However, you are unsure which target adapters are supported.
What would you use to confirm which adapters are supported with your current configuration?
- A. Hardware Universe (HWU)
- B. Upgrade Advisor
- C. OneCollect
- D. Interoperability Matrix Tool (IMT)
Answer: A
NEW QUESTION 12
Which three components are required for NetApp iSCSI LUN access on Linux servers? (Choose three.)
- A. device-mapper-multipath
- B. NetApp SnapDrive
- C. scsi-target-utils
- D. iscsi-initiator-utils
- E. NetApp Host Utilities
Answer: ACE
NEW QUESTION 13
Which data collection tool would be used for obtaining detailed information about hosts that are attached to ONTAP storage?
- A. Upgrade Advisor
- B. OneCollect
- C. Brocade Network Advisor
- D. Conflg Advisor
Answer: B
NEW QUESTION 14
Which option needs to be set on a LUN to guarantee that it cannot be affected by other LUNs in the volume?
- A. Volume Guarantee
- B. Volume Space Reserved
- C. LUN Reservation Disabled
- D. LUN Reservation Enabled
Answer: D
NEW QUESTION 15
A customer is expanding an ONTAP 9.4 switchless 2-node FAS2750 cluster. Two AFF A220 nodes will be added to the cluster.
In addition to the cluster nodes, what else is required to perform the cluster expansion?
- A. Additional management switches are required.
- B. An upgrade to ONTAP 9.5 is required.
- C. Cluster switches are required.
- D. Additional DS224C shelves are needed.
Answer: A
NEW QUESTION 16
Referring to the exhibit, which two actions would you perform to ensure that each host has valid multipathing? (choose two)
- A. Verify that the VLANs are properly configured on the switches
- B. Verify that the VLANs are properly configured on the ONTAP cluster
- C. Verify that ALUA is enabled on the switches
- D. Verify that ISCSI service is started on the ONTAP cluster
Answer: AB
Explanation:
Iscsi is already started, we can not run those commands successfully if the protocol is not started ALUA is enabled on hosts, It is not enabled on switches
VLANs are configured on the Netapp and switches, they need to be properly configured on both sides to work correctly
You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-52AE6E9C-13B6
NEW QUESTION 17
A customer is planning to connect a Linux server to a FAS8200 using Brocade FC switches. During the initial configuration, the SVM does not log in to the fabric.
Which two statements are correct in this scenario? (Choose two.)
- A. NPIV has not been enabled on the switches.
- B. The switch port topology is set incorrectly to the E_Port.
- C. ALUA has not been set up on the FAS8200.
- D. Zoning is incorrectly configured between the Linux server and the ONTAP cluster.
Answer: AC
NEW QUESTION 18
......
100% Valid and Newest Version NS0-520 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/NS0-520-exam-dumps.html (New 234 Q&As)