Best Quality of NS0-592 free practice test materials and exam price for Network-Appliance certification for customers, Real Success Guaranteed with Updated NS0-592 pdf dumps vce Materials. 100% PASS NetApp Certified Support Engineer - ONTAP Specialist exam Today!
Also have NS0-592 free dumps questions for you:
NEW QUESTION 1
You configured iSCSI multipathing on a Windows host to a 2-node ONTAP cluster so that you can attach to some LUNs. You see that the host logging in to both iSCSI LIFs in the ONTAP cluster, and you notice that the igroup is correctly set. After you open Disk Management and rescan for disks, the NetApp LUNs do not show up.
In this scenario, what should be performed to enable the LUNs to be visible to the Windows host?
- A. Set up LUN mapping and try scanning again.
- B. Configure the SVM for FCP and try scanning again.
- C. Set up Selective LUN Mapping (SLM) and try scanning again.
- D. Configure the ONTAP nodes for HA and try scanning again.
Answer: C
NEW QUESTION 2
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?
- A. qos statistics performance show
- B. qos statistics latency show
- C. sysstat -c 30 -M 1
- D. wafltop show -v -cpu -I 10 -c 5-n 6
Answer: A
NEW QUESTION 3
At a customer site, the storage failover giveback command fails when giving back the root aggregate. What would be two reasons for this failure? (Choose two.)
- A. There are active NFS connections.
- B. There are failed disks.
- C. The HA interconnect is not operational.
- D. There are active SIS operations running.
Answer: BC
NEW QUESTION 4
Click the exhibit button.
A customer is reporting that numbers in the statistics volume show command output appear to be incorrect. Referring to the exhibit, which statement is correct?
- A. The problem is due to a difference in operation size.
- B. Perfstat should be used to explain the behavior.
- C. There are operation types that are not listed in the output.
- D. A case with NetApp should be raised to find the root cause.
Answer: A
NEW QUESTION 5
Click the exhibit button.
A storage administrator reports that when they enabled Vscan, they began receiving reports of CIFS users having very slow access to all their files. The storage administrator recovered from the issue by disabling Vscan on their SVM. The storage administrator was able to collect perfstat output during the time of the reported slow access, as shown in the exhibit.
In this situation, what is the problem?
- A. The problem is on the SVM, as shown in the scan_latency output.
- B. Vscan server 192.168.100.144 was slower than Vscan server 10.23.23.54 in completing Vscan requests.
- C. Vscan server 10.23.23.54 was slower than Vscan server 192.168.100.144 in completing Vscan requests.
- D. The problem was with both Vscan servers 192.168.100.144 and 10.23.23.54.
Answer: B
NEW QUESTION 6
Your customer states that the storage efficiency on their FAS 8200 is far below what they had expected for a VMware NFS datastore. They enabled deduplication three days ago. The job ran every night for only 10-20 minutes, and the space savings now is less than 5%.
What is causing the space savings to be so low?
- A. They have enabled aggregate-level inline data compaction, so the savings are at the aggregate level.
- B. They have enabled aggregate-level inline deduplication, so the savings are at the aggregate level.
- C. They have not enabled volume-level compression.
- D. They have not run a baseline deduplication to scan old data.
Answer: C
NEW QUESTION 7
Click the exhibit button.
Your customer is calling about their MetroCluster environment. They have provided you with the output of the metrocluster interconnect adapter show command.
Referring to the exhibit, which statement is correct?
- A. For all MetroCluster configurations, this is expected output.
- B. The InfiniBand cables should be connected in this configuration.
- C. The InfiniBand interconnect is not used in MetroCluster.
- D. This is a 2-node MetroCluster.
Answer: A
NEW QUESTION 8
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)
- A. stats lun
- B. lun stats -vserver
- C. statit
- D. stats volume
Answer: BC
NEW QUESTION 9
Click the exhibit button.
You have just cabled a new shelf to a FAS8200. Running the system node run -node * sysconfig - a command indicates that multipath HA is configured. However, after running Config Advisor, you receive an error that your cabling is incorrect.
As indicated in the exhibit, which two actions will correct the cabling? (Choose two.)
- A. Move the 0b SAS connection on the bottom controller to 0d on the bottom controller.
- B. Move the 0b SAS connection on the top controller to 0d on the top controller.
- C. Move the 0b SAS connection on the top controller to 0d on the bottom controller.
- D. Move the 0b SAS connection on the bottom controller to 0d on the top controller.
Answer: AB
NEW QUESTION 10
A non-maskable interrupt event occurs. The system panics and then reboots. In this scenario, what would have caused the panic?
- A. a secd process
- B. a watchdog timer
- C. an ICMP blackhole detector
- D. a volume location distributed database
Answer: B
NEW QUESTION 11
Click the exhibit button.
Many end users are complaining that logging in their systems takes a long time. When the login to the desktop finishes, everything is fine. The home directories are on NetApp storage. You do not see any significant disk or CPU contention on the controller, so you gather output statistics from the controller and focus on SMB.
Referring to the exhibit, which two actions would help diagnose the problem? (Choose two.)
- A. Engage your Windows team to make sure that the domain controllers are not overloaded.
- B. Engage your desktop team to collect network traces from the clients.
- C. Collect more statistics to determine whether the controller itself is causing latency.
- D. Engage your network team to make sure that there are no issues between the storage controller and the domain controller.
Answer: CD
NEW QUESTION 12
When you issue a volume clone create command, which entity in WAFL is copied?
- A. the vol_info block
- B. the buftree
- C. the data block
- D. the inode file
Answer: D
NEW QUESTION 13
A customer reports that a takeover has been disabled on an HA pair. What would be a cause for this to happen?
- A. The HA interconnect is not functioning properly.
- B. There is a disk running too hot.
- C. The interface for the hardware assist has become unavailable.
- D. The cluster network is not functioning properly.
Answer: A
NEW QUESTION 14
Which two statements are true about a data volume? (Choose two.)
- A. A data volume can be accessed by a LIF on any node.
- B. A data volume can be moved to any aggregate with space for it in the cluster.
- C. A data volume can be accessed by a user connected to any SVM.
- D. An SVM root or root load sharing mirror volume must be present on every node.
Answer: AB
NEW QUESTION 15
You are investigating a CIFS issue at a customer site, but it is unclear which SMB version is being used between the client and the server. The customer has provided you with a packet trace output.
In this scenario, which packet exchange contains information to indicate which SMB version was agreed upon by the client and the server?
- A. Ioct1 Request FSCTL_DFS_GET_REFERRALSIoct1 Response FSCTL_DFS_GET_REFERRALS
- B. Session Setup Request Session Setup Response
- C. Negotiate Protocol RequestNegotiate Protocol Response
- D. Tree Connect Request TreeTree Connect Request Response
Answer: D
NEW QUESTION 16
Click the exhibit button.
A customer reports that their system recently began logging an error. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The bcomd application is responsible for monitoring the observed behavior.
- B. A user is attempting to restart the ntpd daemon.
- C. The spmd application failed to restart the ntpd daemon.
- D. The ntpd daemon is responsible for time services.
Answer: BD
NEW QUESTION 17
Click the exhibit button.
Referring to the exhibit, which change is required to enable the CIFS Autolocation function for the Users share?
- A. Edit the CIFS share’s properties to remove the changenotify property.
- B. Re-create the LIFs to allow both CIFS and NFS protocols.
- C. Change the CIFS share’s Symlink Properties parameter to symlinks.
- D. Modify the CIFS server’s option to enable SMB multichannel.
Answer: C
NEW QUESTION 18
A customer has created an interface group (igroup) named a0a, a VLAN named a0a-2500, and a data LIF associated with the VLAN interface that has been assigned an IP of 10.254.10.100. The customer is able to ping 10.254.10.100 from a Windows client without any issues, but data traffic is not working.
In this scenario, what is the solution to the problem?
- A. Disable flow control on the a0a interface.
- B. Configure an appropriate service policy for the data LIF.
- C. Correct the MTU mismatch between the broadcast domain configuration and the upstream network switches.
- D. Allow data traffic by using LIF firewall policies.
Answer: D
NEW QUESTION 19
......
Thanks for reading the newest NS0-592 exam dumps! We recommend you to try the PREMIUM Downloadfreepdf.net NS0-592 dumps in VCE and PDF here: https://www.downloadfreepdf.net/NS0-592-pdf-download.html (65 Q&As Dumps)