OmniStudio-Developer Exam - Salesforce Certified OmniStudio Developer (SU21)

NEW QUESTION 1
A developer needs to configure a DataRaptor to retrieve data from a single object.The structure of the output data does not need to be changed.
Following best practices, which type of DataRaptor should the developer use?

• A. DataRaptor Transform
• B. DataRaptor Extract
• C. DataRaptor Load
• D. DataRaptor Turbo Extract

Answer: D

NEW QUESTION 2
A developer need to configure a calculation procedure to calculation a subtotal using twodifferent depending on whether the input Boolean variable is Customer is set to true or false.
How should a developer configure the calculation procedure to conditionally execute the correct formula?

• A. Use two separate Calculation Steps with the Conditional Step property selected: use the ISTRUE(isCustomer) and NOT (ISTRUE) (isCustomer) functions in the Condition syntax.
• B. Use two separate Calculation Steps with the Conditional Step property selected: reference just theisCustomer variable in the Conditional syntax (no comparison necessary)
• C. Use two separate Calculation Steps with the Conditional Step property selected: compare the isCustomer variable directly to the literal true and false values in the Condition syntax.
• D. Use a single Calculation Stepswith IF statement directly in the formula definition to reference the isCustome variable and conditionally perform the appropriate calculation.

Answer: B

NEW QUESTION 3
A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?

• A. Toast Completion
• B. Use Future
• C. Invoke Mode Fire and Forget
• D. Invoke Mode Non-Blocking

Answer: D

NEW QUESTION 4
A developer needs to build a multi-step intake form. Each step must allow the user tocancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript
Designer?

• A. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
• B. Add a navigation Action inside each step and set the Component name to ‘’Cancel’’,
• C. Add a navigation Action outside each step and set the Element Name to ‘’Cancel’’,
• D. Add a navigation Action inside each step and set the ElementName to ‘’Cancel’’,

Answer: A

NEW QUESTION 5
Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of theAction1 element to a Remote Action?

• A. Action1. Block
• B. Block A
• C. Action1: Block
• D. Block A
• E. BlockA: Block
• F. Action 1
• G. BlockB: Block
• H. Action1

Answer: B

NEW QUESTION 6
Refer to the exhibit.

A developercreates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the TypeAhead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

• A. Lookup Mode is not selectedin the properties of the Type A Head Block.
• B. Use Data JSON is not selected in the properties of the Type Ahead Block.
• C. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
• D. The Typeghead ley is not in the correct format

Answer: C

NEW QUESTION 7
A developer needs to display read-only contact information in a OmniScript. The developer will format the information as a table, using merge codes to dynamically include first name, last name, street address, state, postal, code, and country from the data JSON.
Which OmniScript element should the developer use to meet this requirement?

• A. Rich text Area
• B. Text area
• C. Text Block
• D. Edit Block

Answer: C

NEW QUESTION 8
Which two in an integration Procedure or DataRaptorcan execute a function like CONCAT or DATEDIFF? Choose 2 answers

• A. In a Set Values Action in a Value field.
• B. In a DataRaptor in an Output Tab Output JSON Path.
• C. In a DataRaptor Action in an Input Parameters value field.
• D. In a Remote Action m an Additional Output value field.

Answer: AD

NEW QUESTION 9
A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number,email
The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?

• A. Use a Datatable element
• B. Set the class’’ collapsible’’ on the block element
• C. Set the collapsible property on the block element
• D. Use a conditional FlexCard State

Answer: C

NEW QUESTION 10
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have trueconditions.
In this scenario, how will the developer know which state will display?

• A. The first state with true conditions sequence closest to the top of the FlexCard canvas will display.
• B. The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display
• C. The state sequenced first in the FlexCard canvas will display.
• D. The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.

Answer: C

NEW QUESTION 11
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the data. What error could cause this behavior?
Choose 2 answers

• A. The fields that are not updated are read only in Salesforce.
• B. In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.
• C. The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.
• D. ContextId is misspelled in the merge code thatpasses the Recordld to the DataRaptor

Answer: AC

NEW QUESTION 12
Refer to the exhibit.

What JSON from the DRGetAccountDetails actionwould display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 13
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscript is used to another Set Values elementContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

• A. Both parent and embedded OmniScripts have the same element name for the Set values element.
• B. A developer failed to include a Navigation Element to pass data from the parent OmniScript.
• C. The LWC PubSub Message flag in the Set Values action of the parent has not been set.
• D. The flagpassDataJSON in the parent OmniScript in not configured correctly.

Answer: C

NEW QUESTION 14
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?

• A. Update the ContextId value to specify an id from the Production org.
• B. Add a Show/Hide condition on the Set Values element.
• C. Delete or Deactivate the Set Values element.
• D. Deactivate the contextId key/value pair

Answer: B

NEW QUESTION 15
A developer is configuring the API URL in an HTTP Action element within an Integration procedure. What is the merge code syntax for passing a Date node from an element named SetValues in the URL?

• A. x%SetValues.Date%
• B. (‘ Setvalues’] [ ‘Date’]
• C. %SetValues Date
• D. {(SetValue
• E. Date)}

Answer: C

NEW QUESTION 16
Refer to the following row-versioned calculation matrix.

The developer needs to delete the row that contains the Code CA-SF. If the developer deletes that row in Version 3, what is the result?

• A. The row is delete only in Version 3.
• B. The row is deleted In Versions 2 and 3 but will remain in Version1.
• C. The row is deleted in Version 3 and Version 1.
• D. The row is deleted in all versions

Answer: A

NEW QUESTION 17
Refer to the exhibit.

All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:

What is the output?

• A. Null
• B. 13.99
• C. 12.99,13.99
• D. 12.99

Answer: D

NEW QUESTION 18
A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:

• A. To %sDetails: Customer|0: ID$
• B. To %Details: Customer|1: ID%
• C. To %%sDetails: Customer|0: ID%%
• D. To %Details: Customer|n: ID%

Answer: B

NEW QUESTION 19
......