hpe6-a41 Exam - Applying Aruba Switching Fundamentals for Mobility

NEW QUESTION 1
Which security benefit does SNMPv3 offer that SNMPv2 does not offer?

• A. SSL encryption
• B. Scopes
• C. Data integrity
• D. RADIUS groups

Answer: C

NEW QUESTION 2
Refer to the exhibit. Exhibit 1.

Exhibit 2.

Which devices can communicate with each other at Layer 2?

• A. Devices 1 and 2 can communicate at Layer 2; Devices 3 and 4 can communicate at Layer 2.
• B. Devices 2 and 3 can communicate at Layer 2.
• C. Devices 1 and 4 can communicate at Layer 2.
• D. Devices 1 and 4 can communicate at Layer 2; Devices 2 and 3 can communicate at Layer 2.

Answer: C

NEW QUESTION 3
What often happens when a Layer2 broadcast domain has a loop?

• A. Some switch-to-switch ports take the MSTP alternative role and stay in that role.
• B. In the switch MAC tables, the MAC addresses frequently move from one port to another.
• C. Switches automatically raise their MSTP configuration revision level by one.
• D. In the switch routing tables, some routes converge with new metrics.

Answer: B

NEW QUESTION 4
A retail company needs a quick way to deploy network infrastructure to new sites.
Which Aruba solutions provide Zero Touch Provisioning (ZTP) for Aruba Instant APs (IAPs) and ArubaOS switches?

• A. Aruba AirWave and Aruba Activate
• B. Aruba Meridian and Aruba ALE
• C. Aruba AirWave and Aruba Central
• D. Aruba Activate and Aruba Meridian

Answer: A

NEW QUESTION 5
An interface on an ArubaOS switch did not receive any BDPUs and has the spanning tree auto-edge setting. What describes the effect of this setting?

• A. The interface has spanning tree disabled on it and ignore BPDUs.
• B. The interface remains forwarding during topology changes.
• C. The interface root path cost is automatically set to 0.
• D. The interface is preferred to be selected as master port.

Answer: B

NEW QUESTION 6
Refer to the exhibit.
Exhibit 1.

Exhibit 2.


Exhibit 3.


How many MSTP regions exist in the topology shown in the exhibit?

• A. one
• B. two
• C. three
• D. four

Answer: B

NEW QUESTION 7
A company has two ArubaOS switches, Switch1 and Switch2. Switch1 will be the commander for a new Virtual Switching Framework (VSF) fabric. Switch2 is a new switch that will be the standby member. The network administrator wants to configure the proper settings on the standby member interface before the standby member joins the fabric.
What should the administrator do before the switches are joined in the VSF fabric?

• A. Configure the interface settings on Switch2. Then enable VSF on Switch2.
• B. Enable VSF on Switch2. Then configure the interface settings on Switch2.
• C. Provision member2 on Switch1. Then configure the member2 interface settings on Switch1.
• D. Provision member2 on Switch1 and member1 on Switch2. Then configure the member2 interface settings on Switch2.

Answer: D

NEW QUESTION 8
Refer to the exhibit.

The student A client needs to connect to FTP Server B. Student A sends the necessary ARP request and receives a reply.
Which destination MAC address does the Student A client use in the FTP packet to FTP Server B?

• A. 00-1D-B3-F1-EF-40
• B. 00-E0-52-F0-44-87
• C. 00-1D-B3-F1-EF-31
• D. 00-E0-52-F0-41-B2

Answer: A

NEW QUESTION 9
Which benefit does Aruba Clarity in Aruba AirWave provide?

• A. It provides an easily searchable network topology that includes physical wired, physical wireless, and virtual network infrastructure devices.
• B. It helps managers use the AirWave Management Platform (AMP) with its context-specific help and links to additional resources.
• C. It enables managers to view all configuration templates for APs, and switches from a single dashboard.
• D. It provides at-a-glance views of issues such as DHCP request and 802.1X authentication failures to aidin troubleshooting.

Answer: A

NEW QUESTION 10
Two switches are members of a Virtual Switching Framework (VSF) fabric. Which statement correctly describes how the switches handle routing?

• A. Only the commander runs routing protocols and builds the IP routing table, but it programs the standby member to route traffic.
• B. Both members build their own IP routing tables, which they synchroniz
• C. Only static IP routing is supported with VSF.
• D. Only the commander runs routing protocols and builds the IP routing table, and all routed traffic must pass through the commander.
• E. Both members run routing protocols and build their own IP routing tables, and they synchronize thetables over VSF links.

Answer: C

NEW QUESTION 11
For which task does a network administrator need to access the enable context on an ArubaOS switch?

• A. to view interface statistics
• B. to view CPU statistics
• C. to ping an IP address
• D. to view configuration files

Answer: D

NEW QUESTION 12
A network administrator wants to form a cluster with several Aruba Instant APs. What is required to achieve this goal?

• A. All APs must be pre-configured with WLANs with the same SSID.
• B. All APs must be in the same regulatory domain.
• C. All APs must operate on the same radio channel.
• D. All APs must be the same model.

Answer: B

NEW QUESTION 13
Refer to the exhibit.
Exhibit 1.

Exhibit 2.

Assume that Switch-2 is correctly configured for OSPF.
Which additional step must the administrator take to enable Switch-1 to advertise 192.168.2.0/24 to Switch-2?

• A. Set a router ID on Switch-1.
• B. Configure a route to advertise 192.168.2.0/24 on Switch-1.
• C. Add Switch-2’s router ID to Switch-1’s OSPF neighbor list.
• D. Enable OSPF on VLAN 2.

Answer: D

NEW QUESTION 14
Refer to the exhibit.

MSTP is implemented in the topology shown in the exhibit, and all the switches are in the same region. The network administrator does not want to use the Internal Spanning Tree (IST) or instance 0 for production traffic.
How many non-IST spanning tree instances does this network need in order to have effective load sharing on the uplinks from the access switches?

• A. two
• B. three
• C. four
• D. five

Answer: C

NEW QUESTION 15
Refer to the exhibit.

The network consists of two ArubaOS switches with routing disabled.
How should the network administrator configure the link between Switch A and Switch B to ensure that all hosts can communicate to all the other hosts within their respective VLANs?

• A. tagged for VLAN 20 and tagged for VLAN 30
• B. untagged for VLAN 10 and tagged for VLAN 30
• C. tagged for VLAN 10 and tagged for VLAN 20
• D. untagged for VLAN 10, untagged for VLAN 20, and tagged for VLAN 30

Answer: C

NEW QUESTION 16
Which ArubaOS switch feature treats multiple ports as one logical port?

• A. OSPF
• B. STP
• C. VSF
• D. link aggregation

Answer: D

NEW QUESTION 17
Which standard for wireless connectivity supports the fastest data rates and Multi-User Multiple Input/Multiple Output (MU MIMO)?

• A. 802.11a
• B. 802.11ac
• C. 802.11g
• D. 802.11n

Answer: B

NEW QUESTION 18
Several servers are connected to an ArubaOS switch. The servers send traffic with 802.1Q VLAN ID 5. How should the network administrator configure the ArubaOS switch to receive this traffic?

• A. Make VLAN 5 the Default VLAN on the switch before the servers connect to their switch ports.
• B. Make switch ports connected to servers untagged members of VLAN 5.
• C. Make switch ports connected to servers tagged members of VLAN 5.
• D. Make VLAN 5 the Primary VLAN on the switch.

Answer: C

NEW QUESTION 19
A network administrator plans to set up a WLAN on an Aruba Instant cluster. The WLAN uses WPA/WPA2 Enterprise security. The administrator wants no authenticate users locally on the cluster.
How should the administrator configure me credentials?

• A. Add a user account for each employee to the cluster internal server database.
• B. Import authorized device MAC addresses to the cluster.
• C. Implement a shared secret or password in the cluster WLAN settings.
• D. Set up an external RADIUS server for authorization.

Answer: D

NEW QUESTION 20
Refer to the exhibit.
Exhibit 1.

Exhibit 2.

The administrator enters the show spanning-tree instance 2 command on Switch-3 and sees the output shown in Exhibit 2.
What could explain the output results?

• A. Switch-1 has a lower MAC address than Switch-2.
• B. Switch-1 has a higher MAC address than Switch-2.
• C. Switch-3 filters BPDUs on port 26.
• D. Switch-3 has incompatible MSTP region settings with other switches.

Answer: D

NEW QUESTION 21
A network administrator wants to be able to access an Aruba Instant cluster at the same IP address even if the current master fails.
How can the administrator achieve this goal?

• A. Configure a VC IP address that is a reserved IP address in the AP’s subnet.
• B. Configure the AirWave IP address in the instant cluster System > Admin settings.
• C. Assign static IP addresses, rather than DHCP ones, to all APs in the instant cluster.
• D. Assign a static IP addresses, rather than a DHCP one, to the AP that is elected master.

Answer: A

NEW QUESTION 22
A server connects to a port on an ArubaOS switch. The network administrator wants to ensure that the port remains forwarding during MSTP topology changes, and changes in the port status do not cause MSTP topology changes.
Which statement describes how the administrator can accomplish this?

• A. The administrator can accept the default behavior of auto-edge.
• B. The administrator can lower the port’s root path cost to zero.
• C. The administrator can manually disable STP on the edge port.
• D. The administrator can configure the port as an MSTP master port.

Answer: D

NEW QUESTION 23
Which security options for a WLAN can authenticate either the computer or the user?

• A. Open with MAC authentication
• B. MAC authentication with WPA2 Enterprise (802.1X) fail-thru
• C. Personal (preshared key) authentication with WEP
• D. Personal (preshared key) authentication with WPA2

Answer: B

NEW QUESTION 24
A company has these requirements to manage its ArubaOS switches:
Management and data traffic cannot share links.
Managers must be able to reach switches remotely over IP connections. How should the administrator set up switches to meet these requirements?

• A. Assign at least one port on each switch to a Virtual Switching Framework (VSF) link and connect those ports in a dedicated network.
• B. Create a management VLAN and tag the VLAN on all switch-to-switch links.
• C. Enable IP authorized managers for the administrator subnet.
• D. Configure IP addressing on OOBM ports and connect them in a dedicated network.

Answer: A

NEW QUESTION 25
A network administrator wants to see the VLANs supported on one ArubaOS switch interface and if those VLANs have tagged or untagged assignments. What should the administrator do to find this information?

• A. View the MAC forwarding table for the interface and VLAN with the show mac-address command.
• B. Use the detail option with the show vlans port command.
• C. Use the local-device option with the show lldp info command.
• D. View the interface with the show interface command.

Answer: B

NEW QUESTION 26
......