Updated Cisco 100-105 exam questions and 100-105 braindumps from Dumpslabs.com. Pass the CCENT 100-105 exam with our 100-105 VCE dumps. Start 100-105 Exam Now.
2024 Cisco Official New Released 100-105 Q&As
100% Free Download! 100% Pass Guaranteed!
https://www.certleader.com/100-105-dumps.html
P.S. Refined 100-105 lab are available on Google Drive, GET MORE: https://drive.google.com/open?id=1p6goOol79JPy5WQ9QjPXU5ZCXFzabnVdNew Cisco 100-105 Exam Dumps Collection (Question 10 - Question 19)Question No: 10Refer to the exhibit. The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could
P.S. Verified 100-105 lab are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bsb-sFsEjKH4qxNCkR_EoI2fGRgBevmQNew Cisco 100-105 Exam Dumps Collection (Question 3 - Question 12)Question No: 3A network administrator is troubleshooting the OSPF configuration of routers R1 and R2. The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic sh
P.S. Validated 100-105 dump are available on Google Drive, GET MORE: https://drive.google.com/open?id=10aMCxNhtGaQ1g5X4WURwuSZDkYQMo5JZNew Cisco 100-105 Exam Dumps Collection (Question 11 - Question 20)New Questions 11Which statement about static routes is true?A. The source interface can be configured to make routing decisions.B. A subnet mask is entered for the next-hop address.C. The subnet mas
P.S. High value 100-105 faq are available on Google Drive, GET MORE: https://drive.google.com/open?id=10aMCxNhtGaQ1g5X4WURwuSZDkYQMo5JZNew Cisco 100-105 Exam Dumps Collection (Question 8 - Question 17)Q1. Refer to the exhibit.A network associate has configured OSPF with the command: City(config-router)# network 192.168.12.64 0.0.0.63 area 0After completing the configuration, the associate discover
P.S. Certified 100-105 item pool are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wKeQp_fzylh6B_iOxIFNYB8egVM39bjONew Cisco 100-105 Exam Dumps Collection (Question 15 - Question 24)Question No: 15R1 is configured with the default configuration of OSPF. From the following list of IP addresses configured on R1, which address will the OSPF process select as the router ID?A.
P.S. Guaranteed 100-105 bundle are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bsb-sFsEjKH4qxNCkR_EoI2fGRgBevmQNew Cisco 100-105 Exam Dumps Collection (Question 4 - Question 13)Q4. From where does a small network get its IP network address?A. Internet Assigned Numbers Authority (IANA)B. Internet Architecture Board (IAB)C. Internet Service Provider (ISP)D. Internet Domain
P.S. Guaranteed 100-105 bundle are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bsb-sFsEjKH4qxNCkR_EoI2fGRgBevmQNew Cisco 100-105 Exam Dumps Collection (Question 2 - Question 11)Q2. Which sequence of actions will allow telneting from a user's PC to a router using TCP/IP?A. Connect the PC's COM port to the router's console port using a straight-through cable.B.
Q1. - (Topic 5) Refer to the exhibit. After configuring two interfaces on the HQ router, the network administrator notices an error message. What must be done to fix this error? A. The serial interface must be configured first. B. The serial interface must use the address 192.168.1.2 C. The subnet mask of the serial interface should be changed to 255.255.255.0 D. The subnet mask of the Fast
Q1. - (Topic 7) Which component of the routing table ranks routing protocols according to their preferences? A. administrative distance B. next hop C. metric D. routing protocol code View AnswerAnswer: A Explanation: Administrative distance - This is the measure of trustworthiness of the source of the route. If a router learns about a destination from more than one routing protocol, ad
Q1. - (Topic 4) A network administrator cannot connect to a remote router by using SSH. Part of the show interfaces command is shown. router#show interfaces Serial0/1/0 is up, line protocol is down At which OSI layer should the administrator begin troubleshooting? A. physical B. data link C. network D. transport View AnswerAnswer: B Explanation: https://learningnetwork.cisco.com/threa
Q1. - (Topic 1) Refer to the exhibit. SwitchA receives the frame with the addressing shown. According to the command output also shown in the exhibit, how will SwitchA handle this frame? A. It will drop the frame. B. It will forward the frame out port Fa0/6 only. C. It will flood the frame out all ports. D. It will flood the frame out all ports except Fa0/3. View AnswerAnswer: B Explanati
Q1. - (Topic 7) When enabled, which feature prevents routing protocols from sending hello messages on an interface'? A. virtual links B. passive-interface C. directed neighbors D. OSPF areas View AnswerAnswer: B Explanation: You can use the passive-interface command in order to control the advertisement of routing information. The command enables the suppression of routing updates ove
Q1. DRAG DROP - (Topic 4) Drag the definition on the left to the correct term on the right. Not all definitions on the left will be used. View AnswerAnswer: Q2. - (Topic 1) A network administrator is connecting PC hosts A and B directly through their Ethernet interfaces as shown in the graphic. Ping attempts between the hosts are unsuccessful. What can be done to provide connectivity betwee
Q1. - (Topic 5) From which of the following attacks can Message Authentication Code (MAC) shield your network? A. DoS B. DDoS C. spoofing D. SYN floods View AnswerAnswer: C Explanation: Message Authentication Code (MAC) can shield your network from spoofing attacks. Spoofing, also known as masquerading, is a popular trick in which an attacker intercepts a network packet, replaces the sou
Q1. - (Topic 3) Which two statements describe the process identifier that is used in the command to configure OSPF on a router? (Choose two.) Router(config)# router ospf 1 A. All OSPF routers in an area must have the same process ID. B. Only one process number can be used on the same router. C. Different process identifiers can be used to run multiple OSPF processes D. The process number ca
Q1. - (Topic 3) Given an IP address of 192.168.1.42 255.255.255.248, what is the subnet address? A. 192.168.1.8/29 B. 192.168.1.32/27 C. 192.168.1.40/29 D. 192.168.1.16/28 E. 192.168.1.48/29 View AnswerAnswer: C Explanation: 248 mask uses 5 bits (1111 1000) 42 IP in binary is (0010 1010) The base subnet therefore is the lowest binary value that can be written without changing the out
Q1. - (Topic 5) What is the purpose of the switchport command? Switch(config-if)# switchport port-security maximum 1 Switch(config-if)# switchport port-security mac-address 0018.DE8B.4BF8 A. It ensures that only the device with the MAC address 0018.DE8B.4BF8 will be able to connect to the port that is being configured. B. It informs the switch that traffic destined for MAC address 0018.DE8B.
Q1. - (Topic 3) Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem? (Choose two.) A. All of the routers need to be configured for backbone Area 1. B. R1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3. C. A static route has been configured from R1 to R3 and prevents the neighbor ad
Q1. - (Topic 5) What is the subnet broadcast address of the LAN connected to Router1? A. 192.168.8.15 B. 192.168.8.31 C. 192.168.8.63 D. 192.168.8.127 View AnswerAnswer: A Explanation: The IP address assigned to FA0/1 is 192.168.8.9/29, making 192.168.8.15 the broadcast address. Q2. - (Topic 3) Which IP addresses are valid for hosts belonging to the 10.1.160.0/20 subnet? (Choose three
Q1. - (Topic 5) Refer to the exhibit. Why was this message received? A. No VTY password has been set. B. No enable password has been set. C. No console password has been set. D. No enable secret password has been set. E. The login command has not been set on CON 0 F. The login command has not been set on the VTY ports. View AnswerAnswer: A Explanation: Your CCNA certification exam is